Anybody used this Mag Coupler?

[mn_doggie]

Cabelas is now selling this mag coupler. Have any of you used it?

MFT AR-15/M-16 Mag Coupler

AR15/M16 Mag Coupler

[pullinmapuddah]

No, I got the promag coupler after someone here recommended them. It fits like OEM and comes in a pack of four from Midway USA. I can't remember but it was very close to $10.

[thacheese]

yeah i have a similar. it isn't bad, but it's overpriced, and not as flexible usage wise as the promag ones.

[5 DOLLAR FOOT LONG]

The one you posted looks like it will fit fine, however it will partially obstruct the loading assist.

I got the promag one and it works great, you just have to be careful not to over-tighten it or it will warp the plastic of the mag and the follower will get stuck.

e: also I had to dremel off maybe 1/3" of the screw because it was too long for the 15-22 mags.

[Boxerglocker]

I use the pro-mag couplers and the only issue I have had is having the happy medium of tightening just enough to maintain a stagger and keep reliable function. What I did to resolve this is place a small piece of two sided tape on the flat side on each mag and after tightening seep a small drop of low strength loctite on the screws, then dremeled then down.

[mn_doggie]

You guys are absolutely right. I just got my Promag couplers in the mail today and tehy work perfect.

I appreciate the help in selecting some couplers.

[Bowlseye]

I have the same one with a CAA logo on it. Works great, just don't over tighten the screws or it will compress the mag and keep the next round from loading, but that goes for all couplers. I would recommend this one for sure. Just remember to stagger the mags so that the spent cases can eject correctly.

[dotdsd334]

If anyone is using magpul pmags and company by the name of dream plastics (dreamplastics.com) makes an excellent coupler. I have used the CAA coupler similar to the one on the site of the original post and was not very happy. Just my 2 cents. good luck