Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Rifles and Shotguns > Smith & Wesson M&P 15-22
o

Notices

Smith & Wesson M&P 15-22 Dedicated to the Smith & Wesson M&P 15-22


Reply
 
Thread Tools Display Modes
  #1  
Old 12-13-2012, 07:27 PM
Shivdaddy Shivdaddy is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jun 2012
Location: Denton, TX
Posts: 47
Likes: 17
Liked 3 Times in 3 Posts
Default Which Harris Bipod?

I am looking at Harris's website and it seems there are about 4 different sets each for the 6-9 inches, 9-13 inches, and 13-25 inches tall. I dont know which size would best fit me? I plan on using it while prone and maybe bench rest as they call it. (What other way could use use one of these?) I am guessing I want the 9-13?

Next question which of the models below should I get? I know I want swivel so that narrows it to two of them. So one has notches the other does not? What are advantages/disadvantages between those 2?


HBL - Adjustable legs extend from 9" to 13" Standard Legs

HBLS - Adjustable legs extend from 9" to 13" Standard Legs.
"S" Series - (Swivels)

HBLM - Adjustable legs extend from 9" to 13" with Leg Notches.

HBLMS - Adjustable legs extend from 9" to 13" with Leg Notches.
"S" Series - (Swivels)


Thanks guys,
Shiv

Last edited by Shivdaddy; 05-11-2015 at 10:29 PM.
Reply With Quote
  #2  
Old 12-13-2012, 07:32 PM
Majorlk's Avatar
Majorlk Majorlk is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2011
Location: Naugatuck, CT
Posts: 5,819
Likes: 5,480
Liked 4,286 Times in 2,238 Posts
Default

You do want the 9-13" model. The model(s) with notched legs make for faster adjustments, IMO. If you are going to be shooting on unlevel (side to side) ground, you'll want the swivel version.

I like the Harris line, but if your budget is tight, take a look at the Caldwell bipods. They have virtually the same models at a somewhat cheaper price.

Last edited by Majorlk; 12-13-2012 at 07:50 PM.
Reply With Quote
  #3  
Old 12-13-2012, 08:02 PM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

the higher ones up to 25"-27" i believe are used if you want to shoot from a sitting position.

the advantage of the notches. you push a button and it springs out to the full length. you can easily adjust it by pushing the leg in and it locks into any of the detents along the leg. the detent lock is very strong. i have that one, and i love it.

the one with the smooth leg, you have to pull the legs out manually... it is under spring tension. it only has a detent at the full extend position. anything in between, you have to manually lock it in place at the height you want. sounds too fiddly.

to me, the swivel was a useless feature and expense since i don't plan on shooting on uneven ground. still, it is great for those that can make use it... like hunters and stuff. i forget what the swivel angle is. the legs can adjust somewhat for uneven ground, but the swivel allows for fine adjustments.

the advantage of the smooth leg i guess is that it has infinite height adjustment between it's range since you choose exactly the height and lock it in. i still thing the notched legs are better, because it is easier to use and sturdier imo.

i use the 6-9" for bench shooting. as far as which height is good for YOU? i don't know. try holding the rifle at the height you would normally shoot supported at and have someone measure the height from the ground/table to the bottom of your rifle. that should give you a good idea which height to get.
Reply With Quote
  #4  
Old 12-13-2012, 08:08 PM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

oh... another junk thing about the smooth legs is that it is harder to get each leg equal since you manually adjust each one. the one with the detents makes it easy since there are only so many detents for it to adjust at. definitely get the one with the detents imo.
Reply With Quote
  #5  
Old 12-13-2012, 08:32 PM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

aha.... i found a pretty good video describing the differences between the smooth and notched harris legs:
Harris Bipods - YouTube
Reply With Quote
  #6  
Old 12-13-2012, 09:39 PM
Gopher Slayer's Avatar
Gopher Slayer Gopher Slayer is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Oct 2011
Location: Washington/Montana
Posts: 999
Likes: 475
Liked 608 Times in 322 Posts
Default

The notched leg models are nice. Mine doesn't have them, but my next one will.

Quote:
Originally Posted by sound wave View Post
aha.... i found a pretty good video describing the differences between the smooth and notched harris legs:
Harris Bipods - YouTube
good vid

It's funny though. At 2:30 he makes it look so damn difficult to extend the legs on the smooth model. He even says you have to push the button to extend them, which isn't true. Then at 3:00 he shows himself do it easily without pushing the button. It kind of reminds me of a cheesy infomercial.
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 12-13-2012, 10:24 PM
Titegroups Titegroups is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Feb 2010
Location: Florida
Posts: 1,338
Likes: 65
Liked 247 Times in 166 Posts
Default

Another thought, buy a cheap utg and see what length works for you then spemd the money on a harris. Amazon $20.
Reply With Quote
  #8  
Old 12-13-2012, 11:04 PM
Shivdaddy Shivdaddy is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jun 2012
Location: Denton, TX
Posts: 47
Likes: 17
Liked 3 Times in 3 Posts
Default

I need to know now! I am wanting the Harris as a Xmas gift from the inlaws.
Reply With Quote
  #9  
Old 12-13-2012, 11:14 PM
Shivdaddy Shivdaddy is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jun 2012
Location: Denton, TX
Posts: 47
Likes: 17
Liked 3 Times in 3 Posts
Default

Man thanks for posting that video!!! Would have to be crazy to get the smooth one. Thanks again.
Reply With Quote
  #10  
Old 12-13-2012, 11:27 PM
Shivdaddy Shivdaddy is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jun 2012
Location: Denton, TX
Posts: 47
Likes: 17
Liked 3 Times in 3 Posts
Default

Last question. The website from that video, Triad Tactical has the bipod for $97.20 after shipping. Does it ever get cheaper than that for the 9-13 HBLS ?
Reply With Quote
  #11  
Old 12-14-2012, 03:18 AM
photoracer photoracer is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jul 2011
Location: Martinsburg, WV
Posts: 1,007
Likes: 57
Liked 362 Times in 268 Posts
Default

I found that when shooting my AR in a tactical precision match prone that the 9-13" ones are too long to be comfortable (at least when shooting down a hill at 270+ yards. . I ended up using one of the Winchester ones from Walmart in 6-9" w/20 rd mags and that was much easier to shoot. And since the 10-13" I had was used at 10" the 6-9" works good in level situations when unsprung to 9". Arching my back to get the proper angle on a 10" bipod setting was straining my back.
Reply With Quote
  #12  
Old 12-14-2012, 08:02 PM
Sid Nitzerglobin Sid Nitzerglobin is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2012
Location: OH
Posts: 127
Likes: 118
Liked 44 Times in 27 Posts
Default

I've been debating what height to get myself. I've heard varying reports of whether the 6-9" models will work w/ the S&W banana mags from a bench. Is this just due to variation in bench height and body geometry and posture of the shooter?

I'd like to do a little prone shooting as well, but most of the bipod's use scenarios will be from a bench at the outdoor range or kneeling using the low-ish ledge at my indoor range to plant it. I've been using the long edge of the mag as a rest to take up around 1/4 of the weight so far.

Best to try 6-9" first or the 9-13"? I'm 6' 2" if that makes any difference.
Reply With Quote
  #13  
Old 12-14-2012, 08:27 PM
Majorlk's Avatar
Majorlk Majorlk is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2011
Location: Naugatuck, CT
Posts: 5,819
Likes: 5,480
Liked 4,286 Times in 2,238 Posts
Default

Some people seem to have no problem with the 6-9" models from the bench but I prefer the 9-13". I use the same bipod on all my rifles, except my M1.

Using the mag itself as a rest can sometimes cause feeding problems. Just a caution ...
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 12-14-2012, 10:13 PM
Shivdaddy Shivdaddy is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Jun 2012
Location: Denton, TX
Posts: 47
Likes: 17
Liked 3 Times in 3 Posts
Default

Another question! I was thinking these things just attach to the rail, but I need to buy an adapter? I want to be able to swivel/rotate my rifle and was thinking the bipod below will be able to do that, is that right? I ask because I see they have a "rota-pod" for an additional $80. I thought that was what the Swivel did in the model below.


HBLMS - Adjustable legs extend from 9" to 13" with Leg Notches. "S" Series - (Swivels)


Thanks guys,
David
Reply With Quote
  #15  
Old 12-14-2012, 10:25 PM
Majorlk's Avatar
Majorlk Majorlk is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2011
Location: Naugatuck, CT
Posts: 5,819
Likes: 5,480
Liked 4,286 Times in 2,238 Posts
Default

No, the Harris do not attach directly to the rail. You will need an adaptor. Here are several:

Amazon.com: bipod adaptor

There are many more if you look for them.

As for "rotating", the bipods don't allow that. There is some limited movement to allow the rifle to stay level on un-level ground, but not to rotate about a point.

Last edited by Majorlk; 12-14-2012 at 10:27 PM.
Reply With Quote
  #16  
Old 12-14-2012, 10:55 PM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

the swivel feature and the rota-pod are different.

as majorlk said, the swivel only allows for for correction of horizontal leveling. as when you are on un-level ground.

the rota-pod allows you to turn the rifle to the left or right....like a turret. like if you were trying to follow a moving target.... or shoot at different targets without having to move the bipods feet.
Reply With Quote
The Following 2 Users Like Post:
  #17  
Old 12-14-2012, 11:32 PM
Sid Nitzerglobin Sid Nitzerglobin is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2012
Location: OH
Posts: 127
Likes: 118
Liked 44 Times in 27 Posts
Default

I'd like to be able to easily swap between supported and unsupported shooting w/o having the additional weight and clutter hanging off of the rail when the bipod's not in use.

Will I need to go for a QD swivel adapter to achieve this or is it easy enough to remove/reinstall the bipod that I can go w/ a more fixed option?
Reply With Quote
  #18  
Old 12-15-2012, 12:26 AM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

Quote:
Originally Posted by Sid Nitzerglobin View Post

Will I need to go for a QD swivel adapter to achieve this or is it easy enough to remove/reinstall the bipod that I can go w/ a more fixed option?
i only have experience with the QD bipod mount. for my purposes, i think it is worth the extra money. put the mount against the rail, flip the switch. done. exact same tension every time. no chance of working itself loose.

if you don't want to spend the extra cash, then i would say go for the one with the knob. that would probably be good enough... you can still put it on and remove it pretty quickly.

they also make a type of mount that you attach to your rail semi-permanently using an allen screw. the harris bipod (the one brand i can speak for) is designed so that you can attach it to that type of mount as well. when you remove the bipod, the mount stays on the rifle (or you can remove the mount with an allen wrench) . to me, it is fiddly and it doesn't fit my needs. maybe that isn't a big deal to you, but i would avoid it.

just my 2 cents.
Reply With Quote
The Following User Likes This Post:
  #19  
Old 12-15-2012, 01:08 AM
Sid Nitzerglobin Sid Nitzerglobin is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2012
Location: OH
Posts: 127
Likes: 118
Liked 44 Times in 27 Posts
Default

Quote:
Originally Posted by sound wave View Post
i only have experience with the QD bipod mount. for my purposes, i think it is worth the extra money. put the mount against the rail, flip the switch. done. exact same tension every time. no chance of working itself loose.
Is it the GG&G 1406? That's the one I was considering but would love to find another reliable, more cost effective cam style option if one exists.
Reply With Quote
  #20  
Old 12-15-2012, 02:01 AM
sound wave's Avatar
sound wave sound wave is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Nov 2012
Location: Honolulu, Hawaii
Posts: 283
Likes: 43
Liked 116 Times in 68 Posts
Default

no, i have a larue. definitely not "more cost effective", but they make quality products. i also got a couple of their optic mounts.
Harris Bipod BRM and LaRue Tactical LT130 QD Mount | LaRue Tactical

larue is overkill if you are only going to use it on your 15-22.
Reply With Quote
  #21  
Old 12-15-2012, 02:27 AM
Sid Nitzerglobin Sid Nitzerglobin is offline
Member
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Dec 2012
Location: OH
Posts: 127
Likes: 118
Liked 44 Times in 27 Posts
Default

Ahh, nice. I'm surprised it's actually not all that much more than the GG&G+Harris would be.

I'm planning on building a 5.56/.223 or 7.62/.308 AR in the future (assuming I still can by the time I budget it...) so it might not be wasted money to go w/ a quality QD setup.

Thanks!
Reply With Quote
  #22  
Old 12-15-2012, 12:44 PM
Maddmax's Avatar
Maddmax Maddmax is offline
US Veteran
Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod? Which Harris Bipod?  
Join Date: Apr 2009
Location: N.E. Iowa Boondocks USA
Posts: 2,888
Likes: 5,524
Liked 1,597 Times in 993 Posts
Default

Quote:
Originally Posted by Sid Nitzerglobin View Post
I've been debating what height to get myself. I've heard varying reports of whether the 6-9" models will work w/ the S&W banana mags from a bench. Is this just due to variation in bench height and body geometry and posture of the shooter?

I'd like to do a little prone shooting as well, but most of the bipod's use scenarios will be from a bench at the outdoor range or kneeling using the low-ish ledge at my indoor range to plant it. I've been using the long edge of the mag as a rest to take up around 1/4 of the weight so far.

Best to try 6-9" first or the 9-13"? I'm 6' 2" if that makes any difference.
Just a thought. You can also move the bipod back towards the magwell. I've done that at different times (to stay off the mag) and it also works reasonably well shooting moving targets.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Harris bipod Willyboy Smith & Wesson M&P15 Rifles 9 04-27-2017 11:01 AM
Harris Bipod Adaptor onlysmith&wesson Smith & Wesson M&P15 Rifles 3 12-27-2016 03:20 PM
SOLD: Harris S25 Bipod wass Accessories/Misc - For Sale or Trade 1 11-25-2016 07:14 PM
Question about Harris bipod Cicirich Smith & Wesson M&P10 Rifles 2 03-13-2015 05:00 PM
Harris bipod ?, no it's a XLA. Willl Smith & Wesson M&P 15-22 13 04-08-2013 09:01 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:58 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)