Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Rifles and Shotguns > Smith & Wesson M&P 15-22
o

Notices

Smith & Wesson M&P 15-22 Dedicated to the Smith & Wesson M&P 15-22


Reply
 
Thread Tools Display Modes
  #1  
Old 12-25-2012, 01:53 AM
LanneG LanneG is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Posts: 5
Likes: 1
Liked 0 Times in 0 Posts
Default Hello all and Merry Christmas

Recently purchased a S&W M&P 15-22, I have put approximately 300 rounds downrange. At first all seemed well, tried to zero the iron sights and it progressively shot worse. The pattern was sometimes ok, somestimes wild flyers. Cleaned the gun and noticed some tightness near the bolt end of the gun. Noticed what looked like fouling. Back to the range, same issues only worse. Broke it down for close inspection again, ran a brush down the barrel and it was extremely tight again. Used a Hoppes solvent and pad, it became logdged in the barrel again near the bolt again only this time terminally stuck. Used soft taps from muzzle end to dislodge the cleaning flute only to find a wad of lead fall out. A large clydrical piece of accumalated lead that blew my mind as to how large it was and odd shaped, looked like the bullets were slivering off a little piece at a time until the end result described. I have thoroughly cleaned it a the barrel looks great, clean as a whistle with no areas of fouling.

Has anyone heard of this happening before? What do you think may have caused it?

Novice to the shooting arts of AR styled guns but love this gun, any help is appreciated.
Reply With Quote
  #2  
Old 12-25-2012, 10:34 AM
Kai Winters's Avatar
Kai Winters Kai Winters is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Nov 2012
Location: Northern, NY
Posts: 97
Likes: 31
Liked 71 Times in 36 Posts
Default

Wow interesting tale.
I've had very little buildup in my barrel even after many hundreds of rounds.
I wonder if you had a bullet disintegrate in the barrel?
Hopefully that is the end of your troubles.

Welcome aboard and a very Merry Christmas to you and yours.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 12-25-2012, 10:52 AM
dogboy99 dogboy99 is offline
Member
Hello all and Merry Christmas  
Join Date: Dec 2005
Location: Orlando, Fl
Posts: 69
Likes: 15
Liked 29 Times in 16 Posts
Default

Merry Christmas. Its sounds like a bad bullet did disintegrate in the barrel leaving enough lead to cause the problem you had. Scarey situation. lucky that it wasn't worse. I would test fire it one round at a time & do a visual inspection after each shot to make sure the problem isn't caused by the rifle. Check each round before it is chambered to see if its ammo related & /or call S&W for expert advice. I shot 300 plus rounds through mine with about 1 jam up per 25 rounds for the first 100 or so rounds but no issues after that since. I did remember I had one jam & when I ejected the cartridge the bullet was bent on an angle. This was with Winchester 22lr varmint ammo. Rifle seems flawless now. Perhaps a break in issue??
Be cautious.
Reply With Quote
  #4  
Old 12-25-2012, 07:23 PM
LanneG LanneG is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Posts: 5
Likes: 1
Liked 0 Times in 0 Posts
Question Thanks for the info and advice.

I will be cautious and try one round at a time then inspect. I just had a bad experience with my model 70 remington 270 rifle. It seems a cartridge exploded in the chamber blowing out the bottom portion of the magazine through the wood. Very lucky to have shooting glasses on, just a few wood splinters in the face and finger. It is being tested by remington to find the cause. It seems I have some bad mojo with ammo these days. I am not making this stuff up, really. Thanks again for your input, LG
Reply With Quote
  #5  
Old 12-25-2012, 07:38 PM
Majorlk's Avatar
Majorlk Majorlk is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2011
Location: Naugatuck, CT
Posts: 5,819
Likes: 5,480
Liked 4,286 Times in 2,238 Posts
Default

What was the brand of ammo? I must admit that I have never seen anything like that.
Reply With Quote
  #6  
Old 12-25-2012, 08:55 PM
Maddmax's Avatar
Maddmax Maddmax is offline
US Veteran
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Apr 2009
Location: N.E. Iowa Boondocks USA
Posts: 2,888
Likes: 5,524
Liked 1,597 Times in 993 Posts
Default

You might also load a live round and eject it before being fired to see if "something" is scraping the bullet prior to being loaded. Could be a burr in a bad place.

I too would also like to know what brand of ammo was doing this.
Reply With Quote
  #7  
Old 12-25-2012, 11:45 PM
LanneG LanneG is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Posts: 5
Likes: 1
Liked 0 Times in 0 Posts
Default

Remington Thunderbolt High Velocity 22LR.

Will update when I can get to the range. Thanks, LG
Reply With Quote
  #8  
Old 12-26-2012, 12:12 AM
davidbush05's Avatar
davidbush05 davidbush05 is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Nov 2012
Location: Lafayette, IN
Posts: 53
Likes: 59
Liked 16 Times in 12 Posts
Default

Merry Christmas to all. I'm also new the the AR platform in general and the 15-22 specifically but what amazes me the most is how picky this riffle can be when it comes to the type of ammo used. I personally have stayed away from Remmington after reading the owners manual even though I use their ammo in my 9's with no problem what so ever. I have tried several brands and types within brands since I joined the 15-22 club with the worst experience coming after using Winchester m22. Nothing compared to what you described. I hope your next trip goes much better. I'll stick with the federal and CCI and hopefully never have to deal with a day like you just had. I'm glad your ok and have a safe and happy new year!
Reply With Quote
  #9  
Old 12-26-2012, 12:52 AM
E6type E6type is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Jul 2010
Posts: 138
Likes: 0
Liked 14 Times in 9 Posts
Default

Quote:
Originally Posted by LanneG View Post
Remington Thunderbolt High Velocity 22LR.
You really shouldn't break in the rifle with **** ammo like that. Clean it and feed it a steady diet of CCI minimags on your next outing.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 12-26-2012, 01:06 AM
les strat's Avatar
les strat les strat is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Mar 2011
Posts: 285
Likes: 358
Liked 132 Times in 54 Posts
Default

Break the rifle down and eyeball down the barrel and see if there is anything noticeable.
__________________
686, 629, 15-22 MOE FDE
Reply With Quote
  #11  
Old 12-26-2012, 10:47 AM
LanneG LanneG is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Posts: 5
Likes: 1
Liked 0 Times in 0 Posts
Default

I am going to use cci mini mags, I was told the Rem I bought would be ok. After a couple hours of cleaning the barrell looks great. Rifled from muzzle to breech. Thanks for the input from all, nice to have a base of knowledge and experience to rely on.
Reply With Quote
  #12  
Old 12-28-2012, 12:44 AM
LanneG LanneG is offline
Member
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Posts: 5
Likes: 1
Liked 0 Times in 0 Posts
Default Sweet little jewel of a gun!

At the range today, I listened to all of the posts received and had awesome results. CCI mini mags performed well, no problems. Test fired one at a time then inspect, very little fouling and no change in the appearance of the barrel. Swabbed clean and put a few downrange with great results. This gun is so much fun to shoot, zeroed in my holo sight quickly and enjoyed some freestyle plinking. Cannot wait to shoot it again. Thanks to all for the advice and comments.
Reply With Quote
  #13  
Old 12-28-2012, 01:16 AM
Damocles's Avatar
Damocles Damocles is offline
US Veteran
Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas Hello all and Merry Christmas  
Join Date: Dec 2012
Location: Wyoming
Posts: 226
Likes: 565
Liked 155 Times in 63 Posts
Default

Welcome to the forum!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MERRY CHRISTMAS TO ALL! jdf1966 The Lounge 1 12-25-2015 12:34 PM
Merry Christmas raljr1 The Lounge 1 12-24-2014 07:08 PM
Merry Christmas infamous209 Smith & Wesson M&P 15-22 0 12-25-2010 04:55 AM
Merry Christmas to All! CT Smith Fan The Lounge 1 12-24-2010 11:17 AM
Merry Christmas Wisent S&W Revolvers: 1980 to the Present 10 12-24-2010 10:45 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:15 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)