Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson M&P Pistols
o

Notices

Smith & Wesson M&P Pistols All Variants of the Smith & Wesson M&P Auto Pistols


Reply
 
Thread Tools Display Modes
  #1  
Old 04-22-2012, 08:31 AM
NucPhysics NucPhysics is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 36
Likes: 2
Liked 12 Times in 9 Posts
Default Grip sleeve on the M&P Shield

Hi everyone,

I have had the Shield for almost a week now and must say the gun is excellent. One issue I have run into though is how my hand fits the narrow grip. I have a very wide palm with average length fingers and when gripping the narrow grip, it really grinds into the first joint on my middle finger. It even hurts my finger just dry firing for a short bit. I absolutely understand this is my problem and not a problem with the gun but as I really like the Shield, I want to find a way to make it work.

Anyone have any experiences with using a Hogue or Pachmayr grip yet? I have never used one as all my other guns with wider grips don't bother me in the slightest. Also, all of my other guns have fingergroves so I have no problem with a sleeve that has groves (might even prefer it). I don't want to just wear a glove to shoot as that is not how I would CC.

Thank you for your help.
Reply With Quote
  #2  
Old 04-22-2012, 09:06 AM
melissa5's Avatar
melissa5 melissa5 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2012
Location: NE Georgia
Posts: 71
Likes: 33
Liked 69 Times in 10 Posts
Default

I'm also looking for a grip sleeve and haven't seen one made just for the Shield yet. Maybe one made for a Keltec PF9 or Walther PPS would work.
__________________
John 3:16
Reply With Quote
  #3  
Old 04-22-2012, 03:42 PM
phred119 phred119 is offline
Member
 
Join Date: Jan 2006
Location: S.C.
Posts: 54
Likes: 2
Liked 12 Times in 8 Posts
Default

I had the same issue with the first knuckle on my middle finger. Something with trying to get a solid grip on this little gun just didn't agree with me, and my knuckle was raw, just from dry firing!

To alleviate the issue, I simply sanded down the texture from the under side of the trigger guard, making it smooth. So far, so good!
Reply With Quote
  #4  
Old 04-22-2012, 03:51 PM
youseemym&p youseemym&p is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Location: Maine
Posts: 226
Likes: 8
Liked 80 Times in 37 Posts
Default

also the grip sleeves for the kahr CW9 fit the shield quite well.need to trim a tad off the bottom curve but.

I use Houge wrap around's on most of my medium frame glocks because i have giant crazy man hands and im 6'4 haha. they work great and reduce felt recoil some too!
__________________
6906,6904,g23,g21,RIA1911,40c
Reply With Quote
  #5  
Old 04-22-2012, 08:10 PM
GRP17 GRP17 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2009
Location: Wa State
Posts: 114
Likes: 8
Liked 7 Times in 7 Posts
Default

Im sure they will be made down the road
Reply With Quote
  #6  
Old 04-24-2012, 10:10 AM
onetuza onetuza is offline
Member
 
Join Date: Jul 2008
Posts: 45
Likes: 0
Liked 3 Times in 2 Posts
Default

Lyman Customer Service Dept. (Pachmayr) says, "We do not have plans to make this grip right now, but we will pass the request on to our marketing department for there consideration."

I have been unable to get a response from Limbsaver as to which model will fit best, #12012 or #12013.
Reply With Quote
  #7  
Old 04-24-2012, 12:52 PM
Capt Crunch's Avatar
Capt Crunch Capt Crunch is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Jan 2012
Posts: 321
Likes: 79
Liked 105 Times in 55 Posts
Default

Well if Pachmayr makes some for the Shield I hope they make a set for the Compact M&P also. They say the regular M&P one works but it actually leaves a lot hanging over the bottom of the grip. I ended up trimming mine but I hate trimming rubber as it never comes out straight and ends up looking really getto.
__________________
This Signature is too Short!
Reply With Quote
  #8  
Old 04-24-2012, 03:13 PM
handlebar's Avatar
handlebar handlebar is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: May 2006
Location: south Florida
Posts: 317
Likes: 9
Liked 226 Times in 83 Posts
Default

just use an old bike inner tube. that is what is on all of my guns. very thin, yet gives a slightly tacky feel.
__________________
handlebar-proud to be American
Reply With Quote
  #9  
Old 04-26-2012, 10:34 PM
VN Vet's Avatar
VN Vet VN Vet is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 45
Likes: 12
Liked 23 Times in 11 Posts
Default

Handlebar is right. A used tire tube will work. Plus you can add another layer if it is still too small for you. This should work until a better choice is available.

Vv

Last edited by VN Vet; 04-26-2012 at 10:36 PM.
Reply With Quote
  #10  
Old 04-27-2012, 11:52 AM
flatlander1985 flatlander1985 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Nov 2011
Posts: 4
Likes: 1
Liked 0 Times in 0 Posts
Default Talon grips

I saw Talon Grips are now available for the Shield - that was quick!
Reply With Quote
  #11  
Old 04-27-2012, 12:37 PM
Moonman Moonman is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Dec 2009
Location: Northeast Ohio
Posts: 4,273
Likes: 3,043
Liked 1,791 Times in 932 Posts
Default

I just ordered a GRANULAR set from Talon for the Shield.
__________________
NRA Pistol/Rifle Inst. RSO
Reply With Quote
  #12  
Old 04-29-2012, 04:04 AM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Houge Handal Jr fits great. trim the last 2mm once installed with an exacto blade
Reply With Quote
  #13  
Old 04-29-2012, 06:08 AM
onetuza onetuza is offline
Member
 
Join Date: Jul 2008
Posts: 45
Likes: 0
Liked 3 Times in 2 Posts
Default

Quote:
Originally Posted by Fercho64 View Post
Houge Handal Jr fits great. trim the last 2mm once installed with an exacto blade
Pictures please?
Reply With Quote
  #14  
Old 04-29-2012, 02:40 PM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Quote:
Originally Posted by onetuza View Post
Pictures please?
Reply With Quote
  #15  
Old 04-29-2012, 03:59 PM
IllinoisCCW's Avatar
IllinoisCCW IllinoisCCW is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2012
Posts: 124
Likes: 0
Liked 40 Times in 22 Posts
Default

Quote:
Originally Posted by Fercho64 View Post
Looks great. Just ordered one. Did you have to trim it?

I also ordered a Blackhawks flat belt holster for conceal carry.


---
I am here: http://tapatalk.com/map.php?mglnh4
Reply With Quote
  #16  
Old 04-29-2012, 04:23 PM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

I did. You can push the sleeve all the way up but the bottom of the trigger guard is rough and just holding it was hurting my middle finger so I slided it down just a bit to clear that unconfortable friction and without the magazine installed, I trimmed it with a new blade using the edge of the grip as a guide so its a perfect fit and not jaggeded. Its worth every penny of the $10.00 I paid for it

Last edited by Fercho64; 04-29-2012 at 04:26 PM.
Reply With Quote
  #17  
Old 04-29-2012, 05:15 PM
onetuza onetuza is offline
Member
 
Join Date: Jul 2008
Posts: 45
Likes: 0
Liked 3 Times in 2 Posts
Default

Quote:
Originally Posted by Fercho64 View Post
I did. You can push the sleeve all the way up but the bottom of the trigger guard is rough and just holding it was hurting my middle finger so I slided it down just a bit to clear that unconfortable friction and without the magazine installed, I trimmed it with a new blade using the edge of the grip as a guide so its a perfect fit and not jaggeded. Its worth every penny of the $10.00 I paid for it
I've got one on order. I agree about the stippling on the underside of the trigger guard. I read where one guy polished it smooth. I've been thinking of doing the same thing.
Reply With Quote
  #18  
Old 04-30-2012, 04:14 PM
Moonman Moonman is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Dec 2009
Location: Northeast Ohio
Posts: 4,273
Likes: 3,043
Liked 1,791 Times in 932 Posts
Default

Ordered the Talon Granular stick-on grip deal for my M&P Shield on Friday afternoon, it arrived in the mail Monday. They also have Rubber.

I like it, really adds some extra grip in your hand. My Shield in My hand it just felt a little slippery as produced.
__________________
NRA Pistol/Rifle Inst. RSO
Reply With Quote
  #19  
Old 05-03-2012, 02:43 PM
dakshep1 dakshep1 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Feb 2012
Location: NJ
Posts: 26
Likes: 0
Liked 1 Time in 1 Post
Default

Thank You All for your tip for Talon Grips. I just ordered a set for my M&P SHIELD 9mm. Now i've got another problem. After putting first mag thru and firing the last round as you know the slide locks open. Inserting the second Mag and "trying" to push down the slide stop to slam the barrel forward it takes pressure from 2 fingers. Is there a way to be able to just use your thumb only? When i was making my purchase and trying to release the slide in front of the salesman i noticed this and when brought to his attention he said its because the gun is stiff. Even after taking it all down and oiling where necessary its still hard as h--- to push it down to release the slide.
else have that same problem? You can answer me here or at [email protected]
Thanks.
Lew
Reply With Quote
  #20  
Old 05-03-2012, 04:25 PM
wachuko's Avatar
wachuko wachuko is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Aug 2010
Location: Orlando, FL
Posts: 124
Likes: 90
Liked 32 Times in 22 Posts
Smile

Quote:
Originally Posted by dakshep1 View Post
...Now i've got another problem. After putting first mag thru and firing the last round as you know the slide locks open. Inserting the second Mag and "trying" to push down the slide stop to slam the barrel forward it takes pressure from 2 fingers. Is there a way to be able to just use your thumb only? ...
Lew
I am writing this in the upmost polite manner... read the manual. The slide stop is not used to release the slide... only to lock the slide. This has been discussed in several threads here.

I hope that helps.
__________________
Stay safe, stay alert
Wachuko
Reply With Quote
The Following 2 Users Like Post:
  #21  
Old 05-03-2012, 04:32 PM
Moonman Moonman is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Dec 2009
Location: Northeast Ohio
Posts: 4,273
Likes: 3,043
Liked 1,791 Times in 932 Posts
Default

+1 for read the Manual.

I know, but REAL MEN should READ the Manual. Rack the slide to release it.

The manual also will tell you that the FRONT sight is the ADJUSTABLE ONE on the Shield, the REAR SIGHT is only REMOVABLE for replacement sights.
__________________
NRA Pistol/Rifle Inst. RSO
Reply With Quote
  #22  
Old 05-22-2012, 07:00 PM
97thSignalman's Avatar
97thSignalman 97thSignalman is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Jan 2010
Location: Chagrin Falls, Ohio
Posts: 132
Likes: 5
Liked 19 Times in 11 Posts
Default

Quote:
Originally Posted by dakshep1 View Post
Thank You All for your tip for Talon Grips. I just ordered a set for my M&P SHIELD 9mm. Now i've got another problem. After putting first mag thru and firing the last round as you know the slide locks open. Inserting the second Mag and "trying" to push down the slide stop to slam the barrel forward it takes pressure from 2 fingers. Is there a way to be able to just use your thumb only? When i was making my purchase and trying to release the slide in front of the salesman i noticed this and when brought to his attention he said its because the gun is stiff. Even after taking it all down and oiling where necessary its still hard as h--- to push it down to release the slide.
else have that same problem? You can answer me here or at [email protected]
Thanks.
Lew
I have an M&P9 and 9c and neither one can be closed by trying to depress the slide lock. I wish it did but it ain't no 1911. Read the manual and get over it.
__________________
Andy
Reply With Quote
  #23  
Old 05-24-2012, 02:38 PM
Shielded's Avatar
Shielded Shielded is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 538
Likes: 391
Liked 99 Times in 65 Posts
Default

Quote:
Originally Posted by Fercho64 View Post
I agree with Fercho64 the handall jr fits good, although I didn't trim mine, best to heat it up with a hairdryer to make it easier to slip on, it's a tight fit.
__________________
John 3:16, Carry Everyday!
Reply With Quote
  #24  
Old 05-24-2012, 02:59 PM
onetuza onetuza is offline
Member
 
Join Date: Jul 2008
Posts: 45
Likes: 0
Liked 3 Times in 2 Posts
Default

Quote:
Originally Posted by Shielded View Post
I agree with Fercho64 the handall jr fits good, although I didn't trim mine, best to heat it up with a hairdryer to make it easier to slip on, it's a tight fit.
I boiled them and still ripped two of them. I gave up on Hogue and went the inner tube route. I cut off and placed the hogue finger separator under the inner tube. Moves a little at times, but will do until Pachmayr or someone else comes out with a Shield-specific grip sleeve.
Reply With Quote
  #25  
Old 05-24-2012, 11:36 PM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Quote:
Originally Posted by Shielded View Post
I agree with Fercho64 the handall jr fits good, although I didn't trim mine, best to heat it up with a hairdryer to make it easier to slip on, it's a tight fit.
I love my hogue but it kept moving and it ripped when I removed it so Houge send me another new grip and I install it with grip tape. I am about to post pictures in another thread. I will link to it
Reply With Quote
The Following User Likes This Post:
  #26  
Old 05-25-2012, 07:11 AM
IllinoisCCW's Avatar
IllinoisCCW IllinoisCCW is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2012
Posts: 124
Likes: 0
Liked 40 Times in 22 Posts
Default

I put them on both of my Shields.


Last edited by IllinoisCCW; 05-25-2012 at 07:39 AM.
Reply With Quote
  #27  
Old 05-25-2012, 09:03 AM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Here is the link HOGUE GRIPS INSTALL ON SHIELD
Reply With Quote
  #28  
Old 05-25-2012, 04:51 PM
elde elde is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: May 2012
Location: Santa Fe
Posts: 14
Likes: 0
Liked 2 Times in 1 Post
Default

Just as an FYI for those who may be interested, the Limbsaver 12013 grip fits the Shield perfectly without any cutting or modification. I have one on my .40 Shield - no issues with it through 200 rounds or so.
Reply With Quote
  #29  
Old 05-25-2012, 04:57 PM
Dohmein Dohmein is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2011
Posts: 225
Likes: 66
Liked 43 Times in 29 Posts
Default

Quote:
Originally Posted by elde View Post
Just as an FYI for those who may be interested, the Limbsaver 12013 grip fits the Shield perfectly without any cutting or modification. I have one on my .40 Shield - no issues with it through 200 rounds or so.
Any type of movement at all so far? I see it will work with the compact but no mention of the shield on the website..
Reply With Quote
  #30  
Old 05-25-2012, 06:20 PM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Quote:
Originally Posted by elde View Post
Just as an FYI for those who may be interested, the Limbsaver 12013 grip fits the Shield perfectly without any cutting or modification. I have one on my .40 Shield - no issues with it through 200 rounds or so.
Elde you must have larger hands. I got one on my PPS and got another one to try on my SHIELD and I just could not get a confortable grasp on it. The Houge is much thinner and just felt right on my medium size hands. I do love how the Limbsaver can be removed and how it sticks to the grip.
Reply With Quote
  #31  
Old 05-25-2012, 06:32 PM
elde elde is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: May 2012
Location: Santa Fe
Posts: 14
Likes: 0
Liked 2 Times in 1 Post
Default

@ Dohmein - No movement. Actually this is an extra Limbsaver I had for one of my PPS'. I'd imagine the Shield is too new for them to have updated their website....although it's obviously the hottest thing on the market right now.

@ Fercho64 - Guilty as charged with regard to big hands. Hogues and Pachmayrs are certainly more comfortable for some folks. I'd imagine that the folks at Pachmayr will be coming out with one of their Tactical Grip Gloves for the Shield any second now.
Reply With Quote
  #32  
Old 05-25-2012, 06:50 PM
Dohmein Dohmein is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Mar 2011
Posts: 225
Likes: 66
Liked 43 Times in 29 Posts
Default

@ Elde - Thanks. I know I need one of them since this is my daily carry gun and its a bit slick for me but I am not sure about Hogue, Limbsaver or someday Pachmayr. So far limbsaver looks best to me since it has no groove
Reply With Quote
  #33  
Old 05-25-2012, 07:01 PM
Fercho64 Fercho64 is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 135
Likes: 3
Liked 20 Times in 14 Posts
Default

Quote:
Originally Posted by elde View Post
@ Dohmein - No movement. Actually this is an extra Limbsaver I had for one of my PPS'. I'd imagine the Shield is too new for them to have updated their website....although it's obviously the hottest thing on the market right now.

@ Fercho64 - Guilty as charged with regard to big hands. Hogues and Pachmayrs are certainly more comfortable for some folks. I'd imagine that the folks at Pachmayr will be coming out with one of their Tactical Grip Gloves for the Shield any second now.
I looked for a Pachmyar 05177 for the LC9. I am almost sure that one will fit the SHIELD, but no one had one in town. Look it up!! It has no grooves

Last edited by Fercho64; 05-25-2012 at 07:06 PM.
Reply With Quote
  #34  
Old 05-27-2012, 03:31 PM
Shielded's Avatar
Shielded Shielded is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Apr 2012
Posts: 538
Likes: 391
Liked 99 Times in 65 Posts
Default

Got my Hogue Handall Jr on my Shield & here are some pics(tried to make it a bit fancy)
Attached Images
File Type: jpg DSCF2213.jpg (124.0 KB, 868 views)
File Type: jpg DSCF2214.jpg (190.6 KB, 1121 views)
__________________
John 3:16, Carry Everyday!
Reply With Quote
  #35  
Old 02-04-2013, 06:56 AM
Alnamvet68 Alnamvet68 is offline
Banned
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Dec 2012
Posts: 1,745
Likes: 448
Liked 1,089 Times in 543 Posts
Default

Lo and behold, the Pachmayr Tactical Grips Glove for the S&W is officially here. As a side note, it fits the Walther PPS perfectly. Product #05179.
Reply With Quote
  #36  
Old 02-04-2013, 02:44 PM
nickel plate's Avatar
nickel plate nickel plate is offline
Member
Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield Grip sleeve on the M&P Shield  
Join Date: Dec 2012
Location: PRK
Posts: 135
Likes: 3
Liked 36 Times in 25 Posts
Default

Quote:
Originally Posted by flatlander1985 View Post
I saw Talon Grips are now available for the Shield - that was quick!
Talon rubberized grip decals. This 9mm sold for $650.00 used.
Attached Images
File Type: jpg Shield Talon1.jpg (80.6 KB, 609 views)
File Type: jpg Shield Talon2.jpg (76.2 KB, 608 views)
Reply With Quote
Reply

Tags
hogue, kahr, pachmayr, walther

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ruger LC 9 grip sleeve Toyman Firearms & Knives: Other Brands & General Gun Topics 3 12-04-2016 08:29 AM
Shield 45 grip sleeve ? brentb636 Smith & Wesson M&P Pistols 5 11-15-2016 03:09 PM
M&P9C Grip Sleeve? OMCHamlin Smith & Wesson M&P Pistols 13 05-30-2016 10:35 PM
S.P.F. A&G grip sleeve G26 for/G19 mags x2 hardknocks Accessories/Misc - For Sale or Trade 1 07-06-2013 11:13 PM
Grip Sleeve - anybody have one SW Gun Guy Smith & Wesson M&P 15-22 10 01-15-2011 10:43 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:38 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)