Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson M&P Pistols
o

Notices

Smith & Wesson M&P Pistols All Variants of the Smith & Wesson M&P Auto Pistols


Reply
 
Thread Tools Display Modes
  #1  
Old 07-10-2018, 06:54 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Smile Transition From 9mm Shield To M&P 9C

Geriatric newbie here, so apologies in advance for misplacing this post or being redundant.
Really enjoy my Shield, but experiencing increased difficulty in ability to obtain a firm purchase at draw from IWB. My hands aren’t extra large, but the grip has begun to feel uncomfortably small. Have done extensive research on the 9-C. The features have appeal, I like the extra round capacity, and it appears to provide adequate concealability.
Would welcome input from any folks with C-9 experience: please include information on any issues that required S&W attention, what you like/don’t like about it, reasons, and why you would or wouldn’t recommend buying it. Plan to test it out at the range tomorrow. Appreciate any thoughts or suggestions. Have heard mixed reviews about ejection failures and whether it’s a firearm other owners would trust their lives with.
Reply With Quote
The Following User Likes This Post:
  #2  
Old 07-10-2018, 07:10 PM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

I went from a Shield 45 (which I really liked, but I have a 1911 in 45) to a 4" 2.0 9c because I wanted more capacity and a 9mm for the range, as well as a general duty gun. At the time, S&W hadn't announced the 3.6" barrel 9c, or I would have bought it. Anyway, I really like this gun, and I would highly recommend it...but you may want to see if you can find the 3.6" barrel model, and compare the two before you buy. I know it's only 0.4" difference, but some say it makes it easier to carry. The capacity is the same for either gun.
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 07-10-2018, 07:23 PM
Wee Hooker Wee Hooker is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Mar 2003
Location: New England, USA
Posts: 4,468
Likes: 3,068
Liked 4,294 Times in 1,610 Posts
Default

I had a M&P9c before I got my 9mm shield. The 9c had the same footprint as the shield and is just a bit wider and heavier. One range session is all it took for me to know that (for me) the 9c was a way better choice. It was SO much easier to shoot accurately in rapid fire /double taps and was allot more comfortable in the hand while doing it. The shield went up for sale less than a week later. Since then I've bought a 45 shield nut still think the 9c (1st gen) is a great choice for it's intended purpose.
__________________
Dave
Reply With Quote
The Following User Likes This Post:
  #4  
Old 07-10-2018, 08:20 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default Transition from Shield to 9-C

Thank you, Dave.
You parenthetically specified first generation. Why?
David
Reply With Quote
  #5  
Old 07-10-2018, 08:44 PM
Wee Hooker Wee Hooker is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Mar 2003
Location: New England, USA
Posts: 4,468
Likes: 3,068
Liked 4,294 Times in 1,610 Posts
Default

Quote:
Originally Posted by ancientpurgolder View Post
Thank you, Dave.
You parenthetically specified first generation. Why?
David
I just like the size of the original compact. Again, it has the same footprint as a 9/40 shield . I think the 3.5" barrel and shorter grip length of the original is a better carry option than the new 4" 2.0 w longer grip. ( I do see they just released a 3.6" version but still don't see the attraction of "upgrading" a Compact design to be longer in both directions and heavier on the hip.) Size wise, the 1.0 was in the sweet spot right between a G26 and G19. ( I've owned both Glock models too at one point.) The original 9c is also several onces lighter than the 4" 2.0 compact.
Not arguing with those who prefer the 2.0 for some reason (likely capacity), for me though, the 1.0 didn't need any improvement (other than an Apex trigger). It is "Goldilocks" just right in size and control ability. It will continue to remain one of my favorites on and off the range.



Your mileage may vary.
__________________
Dave

Last edited by Wee Hooker; 07-10-2018 at 08:55 PM.
Reply With Quote
The Following 2 Users Like Post:
  #6  
Old 07-10-2018, 08:51 PM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

I had a 1.0 9c, and didn't care for the grip size on it. It just didn't fit my hand well. Conversely, I like the smaller grip of the Shield and the bigger grip of the 2.0 9c. I guess the 1.0 9c was like the Goldilocks gun for me...too small and too big. If you can find one to try out, it may work well for you, and it should be priced really well right now. Some of the online vendors may still have some new ones.

BTW, I forgot to say in my original post in your thread, welcome to the forum!
Reply With Quote
The Following User Likes This Post:
  #7  
Old 07-10-2018, 09:31 PM
Telecaster Telecaster is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Dec 2015
Posts: 2,499
Likes: 852
Liked 4,535 Times in 1,504 Posts
Default

The thinness of the Shield makes it a lot more comfotable IWB. But the 2.0C feels better to shoot.
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 07-10-2018, 10:20 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Thank you, GKC, and for your service.

Last edited by ancientpurgolder; 07-10-2018 at 10:22 PM.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 07-11-2018, 07:52 AM
CBStuard CBStuard is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2016
Location: Manassas Va
Posts: 437
Likes: 1
Liked 182 Times in 127 Posts
Default

I am extremely happy w/ my 1.0 9c but haven't tried a 2.0. Have you looked into mag extensions which would lengthen the grip?
Reply With Quote
  #10  
Old 07-11-2018, 11:47 AM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

Quote:
Originally Posted by CBStuard View Post
I am extremely happy w/ my 1.0 9c but haven't tried a 2.0. Have you looked into mag extensions which would lengthen the grip?
If you are asking me, no I haven't. The 1.0 9c is long gone. I did use the extended base plates when I had it...they just added a bit for finger grip, not any added capacity, but I just never got comfortable with that gun. It was just me...a lot of people like it.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 07-11-2018, 12:17 PM
bigwheelzip's Avatar
bigwheelzip bigwheelzip is offline
Absent Comrade
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Dec 2014
Location: Upstate SC
Posts: 12,990
Likes: 17,229
Liked 41,503 Times in 9,146 Posts
Default

Quote:
Originally Posted by ancientpurgolder View Post
Really enjoy my Shield, but experiencing increased difficulty in ability to obtain a firm purchase at draw from IWB. My hands aren’t extra large, but the grip has begun to feel uncomfortably small.
If this is your only issue with the Shield, you might be well served adding a grip sleeve or grip tape to allow a proper grip. These are common fixes for your problem.

Good luck and welcome to the forum.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 07-11-2018, 01:19 PM
rocknroad's Avatar
rocknroad rocknroad is online now
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: May 2016
Location: SoCal
Posts: 198
Likes: 578
Liked 1,004 Times in 134 Posts
Default

Quote:
Originally Posted by bigwheelzip View Post
If this is your only issue with the Shield, you might be well served adding a grip sleeve or grip tape to allow a proper grip. These are common fixes for your problem.

Good luck and welcome to the forum.
^This.

I added grip tape (Talon Grip) at first. It was an improvement. Then, I've recently added a Hogue Handall Beavertail grip sleeve. Wow, what a great improvement that was for me. The Shield 9 now fits my hand like a glove. I love the purchase and the feel. It's a cheap and easy way to see if you can still carry the Shield.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 07-11-2018, 04:13 PM
Ballanrk Ballanrk is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Apr 2017
Posts: 31
Likes: 5
Liked 15 Times in 9 Posts
Default

As others mentioned a grip sleeve or grip tape may satisfy your problems. However, I can't say enough great things about my 9c 1.0 and 2.0.

2 years ago I got my first handgun. So experience is what it is, but before buying I tested the Shield and 9c 1.0 extensively -it was a difficult decision. I felt the Shield was a bit small for me, and for other reasons I went the way of the 9c.

Totally glad I opted for the 9c 1.0 back then, but I love the Shield too.

Both my 9c (1.0/2.0) have been flawless. The 1.0 has seen roughly 4k rounds in the two years I've owned it. I've fired all types of ammo brands, 115/124/147 grains, etc and never a single problem.

I'll never sell it and trust my 9c 1.0 immensely as my EDC. It shares time with my 2.0 now, but still love it. I live in Florida so it's 90% of the time in shorts and a t-shirt. No concealment issues in the slightest, I carry iwb about 3 o'clock.

If grip tape or a sleeve solves your issue -awesome. But, if you are set on testing a 9c (either one) you can't go wrong.

A couple small advantages to the 9c 1.0 I find to be a nice benefit. It obviously can use the 12/15/17 round mags and given the Shield doesn't it's a bonus.

As far as fit in my hand, it feels really natural (it's subjective I know). While I consistently use the medium backstrap I like the small size too.

For me the only minor con was grip length, but I knew that was the case for any compact with my hands so not really a gun specific negative.

As a side note:
I contacted XGRIP last week and they let me know they are rolling out a mag sleeve this summer for the 9c 1.0 to accommodate the new 2.0 9c 15 round mags.
*Take it with a grain of salt from a manufacturer, but since they responded to my question I have to assume they are truly rolling one out pretty soon.

Last edited by Ballanrk; 07-11-2018 at 04:19 PM. Reason: added info
Reply With Quote
The Following User Likes This Post:
  #14  
Old 07-11-2018, 06:02 PM
rman rman is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2006
Location: Northeast Kansas
Posts: 83
Likes: 53
Liked 37 Times in 20 Posts
Talking

I have both a Shield in 9mm and 2.0 Compact w/4" barrel. I like the Shield and it makes a nice carry gun. The only problem I have with it is that at 75, my hand strength isn't what it used to be. I sometimes have a difficult time racking the slide. The 2.0 has a GREAT grip. I have small hands and like the small grip insert and love the new texture. The slide racks much easier than the Shield. The slide to frame and barrel to slide fit are excellent. There is no play and this gun doesn't rattle. I shoot the 2.0 as well as any of my other guns and that includes several nice 1911's. It hides well in an Alien Gear Comfort Tuck 3.5 holster and it's comfortable to wear all day. Out of all my handguns (a considerable number), this one has become my new favorite. I guess you can tell that I'm a big fan.

Last edited by rman; 07-11-2018 at 06:03 PM.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 07-12-2018, 02:33 AM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Quote:
Originally Posted by CBStuard View Post
I am extremely happy w/ my 1.0 9c but haven't tried a 2.0. Have you looked into mag extensions which would lengthen the grip?
I bought and tried both the Hyve and Strike mag extenders. They actually made a significant improvement with my purchase at draw. No hiccups either. Then I started reading about jams and FTF issues. Got cold feet and went back to original factory mags. Think i’ve discovered the problem, however. The polymer clip on my holster has a tendency to move the cant of my Shield so that it doesn’t stay put on the “sweet spot.” Will replace the clip with soft loops, and see if they keep the pistol riding high enough to get a solid grip with fingers.
Meanwhile, got all stoked about the 1.0 9C. Not easy to find on line, and price is running between $425.00-465.00. Thought the 2.0 rollout would drive 9C prices down.
Would welcome any suggestions on what gunshops you feel are reliable if that is permitted to post here.
Reply With Quote
The Following User Likes This Post:
  #16  
Old 07-12-2018, 02:39 AM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Quote:
Originally Posted by Ballanrk View Post
As others mentioned a grip sleeve or grip tape may satisfy your problems. However, I can't say enough great things about my 9c 1.0 and 2.0.

2 years ago I got my first handgun. So experience is what it is, but before buying I tested the Shield and 9c 1.0 extensively -it was a difficult decision. I felt the Shield was a bit small for me, and for other reasons I went the way of the 9c.

Totally glad I opted for the 9c 1.0 back then, but I love the Shield too.

Both my 9c (1.0/2.0) have been flawless. The 1.0 has seen roughly 4k rounds in the two years I've owned it. I've fired all types of ammo brands, 115/124/147 grains, etc and never a single problem.

I'll never sell it and trust my 9c 1.0 immensely as my EDC. It shares time with my 2.0 now, but still love it. I live in Florida so it's 90% of the time in shorts and a t-shirt. No concealment issues in the slightest, I carry iwb about 3 o'clock.

If grip tape or a sleeve solves your issue -awesome. But, if you are set on testing a 9c (either one) you can't go wrong.

A couple small advantages to the 9c 1.0 I find to be a nice benefit. It obviously can use the 12/15/17 round mags and given the Shield doesn't it's a bonus.

As far as fit in my hand, it feels really natural (it's subjective I know). While I consistently use the medium backstrap I like the small size too.

For me the only minor con was grip length, but I knew that was the case for any compact with my hands so not really a gun specific negative.

As a side note:
I contacted XGRIP last week and they let me know they are rolling out a mag sleeve this summer for the 9c 1.0 to accommodate the new 2.0 9c 15 round mags.
*Take it with a grain of salt from a manufacturer, but since they responded to my question I have to assume they are truly rolling one out pretty soon.
Thanks for your perspective. Very helpful.
Reply With Quote
  #17  
Old 07-12-2018, 02:54 AM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Quote:
Originally Posted by rman View Post
I have both a Shield in 9mm and 2.0 Compact w/4" barrel. I like the Shield and it makes a nice carry gun. The only problem I have with it is that at 75, my hand strength isn't what it used to be. I sometimes have a difficult time racking the slide. The 2.0 has a GREAT grip. I have small hands and like the small grip insert and love the new texture. The slide racks much easier than the Shield. The slide to frame and barrel to slide fit are excellent. There is no play and this gun doesn't rattle. I shoot the 2.0 as well as any of my other guns and that includes several nice 1911's. It hides well in an Alien Gear Comfort Tuck 3.5 holster and it's comfortable to wear all day. Out of all my handguns (a considerable number), this one has become my new favorite. I guess you can tell that I'm a big fan.
Totally agree that feel of grip is critical and, of course, subjective. Nice to know we went to different high schools together. Also 75, and over the past few years, have experienced a touch of arthritis and decreased strength of hands. Try to diligently exercise with hand grips to restore some strength. Also installed a steel guide rod in the Shield. Had heard it makes racking the slide easier. Didn’t seem to help much.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 07-12-2018, 09:04 AM
Ranger17's Avatar
Ranger17 Ranger17 is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2013
Location: Back in WI
Posts: 2,034
Likes: 624
Liked 1,845 Times in 837 Posts
Default

I actually went from a 1.0 compact to a Shield. The compact was a perfectly reliable shooter, i just didnt care for how the short grip felt unless i was using full size mags. At that point I’d then just take the full size MP to the range. The compact was just in the middle for me.
While the Shield is obviously thinner it felt better in my hands. That said i have not held one of the 2.0 compacts so couldnt compare them to a Shield.
Reply With Quote
  #19  
Old 07-12-2018, 09:55 AM
smoke33 smoke33 is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2016
Posts: 124
Likes: 7
Liked 62 Times in 35 Posts
Default Transition From 9mm Shield To M&P 9C

I have both a Shield 1.0 and a 9C 1.0 and love shooting them both but, the Shield just fits my hand better. I did put the Talon grips on it and they are fantastic!
The footprint between the two is similar but the difference is in the thinness of the Shield and my choice for carry. I really want to like the Compact more due to capacity but for me, the Shield wins.


Sent from my iPhone using Tapatalk
Reply With Quote
  #20  
Old 07-13-2018, 03:04 AM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

Quote:
Originally Posted by ancientpurgolder View Post
Meanwhile, got all stoked about the 1.0 9C. Not easy to find on line, and price is running between $425.00-465.00. Thought the 2.0 rollout would drive 9C prices down.
The two online vendors that I've used and had good luck with are Buds and Gun Genie. (I like to buy guns from Gun Genie that don't have a factory lifetime warranty, since Gun Genie provides their own...but that isn't an issue with S&W.) The price from Gun Genie, with shipping and fees to my local FFL is about $550, which surprised me. (You'd have to see how your FFLs in your area price them....they do vary by FFL.) At Buds, the price is $395 (after rebate, it says, which I'm not sure what rebate they mean) and free shipping. You'll have to pay transfer fees at your FFL, which may add $25 or so, depending on what they charge.

They may be lower priced at other online vendors, or auction sites, but I don't have any experience with those. I really am surprised that the prices aren't lower with the 2.0 models out...but maybe it's because the 1.0 Compact is in the middle size wise between the Shield and the 2.0 Compact, so there's still a demand I guess.
Reply With Quote
  #21  
Old 07-13-2018, 02:53 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Quote:
Originally Posted by Ballanrk View Post
As others mentioned a grip sleeve or grip tape may satisfy your problems. However, I can't say enough great things about my 9c 1.0 and 2.0.

2 years ago I got my first handgun. So experience is what it is, but before buying I tested the Shield and 9c 1.0 extensively -it was a difficult decision. I felt the Shield was a bit small for me, and for other reasons I went the way of the 9c.

Totally glad I opted for the 9c 1.0 back then, but I love the Shield too.

Both my 9c (1.0/2.0) have been flawless. The 1.0 has seen roughly 4k rounds in the two years I've owned it. I've fired all types of ammo brands, 115/124/147 grains, etc and never a single problem.

I'll never sell it and trust my 9c 1.0 immensely as my EDC. It shares time with my 2.0 now, but still love it. I live in Florida so it's 90% of the time in shorts and a t-shirt. No concealment issues in the slightest, I carry iwb about 3 o'clock.

If grip tape or a sleeve solves your issue -awesome. But, if you are set on testing a 9c (either one) you can't go wrong.

A couple small advantages to the 9c 1.0 I find to be a nice benefit. It obviously can use the 12/15/17 round mags and given the Shield doesn't it's a bonus.

As far as fit in my hand, it feels really natural (it's subjective I know). While I consistently use the medium backstrap I like the small size too.

For me the only minor con was grip length, but I knew that was the case for any compact with my hands so not really a gun specific negative.

As a side note:
I contacted XGRIP last week and they let me know they are rolling out a mag sleeve this summer for the 9c 1.0 to accommodate the new 2.0 9c 15 round mags.
*Take it with a grain of salt from a manufacturer, but since they responded to my question I have to assume they are truly rolling one out pretty soon.
I did it! Bought the last one in stock at local gun store. Very happy with choice. Do the 15/17 round mags of the full size M&P properly fit the 9C? Do you use a sleeve for the 17 rounder? Finally, any suggestions how to loosen up the tool used for changing out palmswells? A bear to dislodge.
Appreciate any input.

Last edited by ancientpurgolder; 07-13-2018 at 03:00 PM. Reason: Used incorrect punctuation
Reply With Quote
  #22  
Old 07-13-2018, 06:49 PM
Ballanrk Ballanrk is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Apr 2017
Posts: 31
Likes: 5
Liked 15 Times in 9 Posts
Default

Quote:
Originally Posted by ancientpurgolder View Post
I did it! Bought the last one in stock at local gun store. Very happy with choice. Do the 15/17 round mags of the full size M&P properly fit the 9C? Do you use a sleeve for the 17 rounder? Finally, any suggestions how to loosen up the tool used for changing out palmswells? A bear to dislodge.
Appreciate any input.
Congrats!

I keep up with pricing and availability of the original 9c. There aren't that many up for sale, they're out there, but seems like it's holding it's popularity with existing owners. I'll probably pickup another given the chance.

Yes, the 15 round 9 Compact 2.0 and 9 FS 17 round mags fit the 9c 1.0 (image included). There is no after market mag sleeve for the 15 round mag to fit the 9c 1.0. But, XGRIP says to be rolling one out this summer. For now I bought a few cheap versions (knock offs) of the XGRIP and cut them down to fit the 15 round mag while at the range. I don't carry it that way, but fun for the range.

XGRIP already makes a mag sleeve for the 17 round magazine to fit the 9c 1.0 (image included).

Smith & Wesson M&P 9/40C Mag Adapter | X-GRIP Mag Adapter

The first few times it was tough to pull out the back strap tool. Twist the tool until it's perpendicular with the grip (image included). Once it's perpendicular it slides right out. Any variation and their is a small plastic catch piece on the tool, which gets caught up on the inside of the grip.
Attached Images
File Type: jpg IMG_0256.jpg (28.8 KB, 81 views)
File Type: jpg IMG_0258.jpg (27.9 KB, 69 views)
File Type: jpg IMG_0259.jpg (26.1 KB, 70 views)
File Type: jpg IMG_0260.jpg (27.5 KB, 78 views)
File Type: jpg IMG_0262.jpg (17.6 KB, 62 views)
Reply With Quote
The Following 2 Users Like Post:
  #23  
Old 07-13-2018, 08:35 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Many thanks for the images, and other helpful information. Appreciate comments everyone posted.
Reply With Quote
  #24  
Old 07-13-2018, 09:16 PM
ancientpurgolder ancientpurgolder is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2018
Location: Oz-Central KS
Posts: 10
Likes: 15
Liked 8 Times in 5 Posts
Default

Ballanrk,
Just read the 17 round M&P mag will fit the 9C. Your thoughts, please.
Reply With Quote
  #25  
Old 07-14-2018, 07:10 AM
Ballanrk Ballanrk is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Apr 2017
Posts: 31
Likes: 5
Liked 15 Times in 9 Posts
Default

Quote:
Originally Posted by ancientpurgolder View Post
Ballanrk,
Just read the 17 round M&P mag will fit the 9C. Your thoughts, please.
The 17 round mags have ran great for me with the XGRIP adapter. Unlike aftermarket mag extensions I have no problem using the XGRIP since it’s a non critical component for the gun to fire. The 9c being my first handgun purchase and primarily my choice for CC. I also wanted something that could serve as a bedside gun at least temporarily. I purposely bought the 9c so I could carry by day and at night I simply loaded a 17 round mag. Fast forward a few years after being bit by the gun bug and I have more options. I still keep the 9c loaded with a 17 rounder when it’s at home.

The 17 round mags made the range visits better for a new shooter like me. Now I simply enjoy the versatility of shooting the 17 round mag at the range. I never intended or have tried carrying it, but as far dependability goes in combination with the 9c.

Same experience for any S&W mag I’ve ran in the 9c. Always feeds and the gun goes bang.
Reply With Quote
  #26  
Old 07-15-2018, 10:31 AM
smoke33 smoke33 is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Jul 2016
Posts: 124
Likes: 7
Liked 62 Times in 35 Posts
Default

I am considering selling my 9C 1.0. My biggest complaint with my 9C 1.0 is the paddle safety. After reading this thread I decided to swap out my Shield 1.0 with the 9C and carry in my Sticky holster. On several checks that dam paddle safety had been moved into the OFF position!
I realize a different holster would prevent this but I love my Sticky and have no issues with my Shield 1.0 safety.


Sent from my iPhone using Tapatalk
Reply With Quote
  #27  
Old 07-24-2018, 08:05 AM
CBStuard CBStuard is offline
Member
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Feb 2016
Location: Manassas Va
Posts: 437
Likes: 1
Liked 182 Times in 127 Posts
Default

A while back someone here posted about a mag sleave that could be cut down to use the 2.0c 15 rnd mag in a 1.0c. Sorry to say I have 3 extras but the only ID is a very faint Amerigun.com but that web site seems to be just links to other sites. Search this forum for the link. The sleeves are too long so you modify them by shortening either the top or botton. Depending which you get two different results;
20180225_141827 by craig stuard, on Flickr
or
20180225_141758 by craig stuard, on Flickr
I use the second one.

Last edited by CBStuard; 07-24-2018 at 08:07 AM.
Reply With Quote
The Following 2 Users Like Post:
  #28  
Old 07-28-2018, 10:44 AM
handejector's Avatar
handejector handejector is offline
Administrator
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Mar 2005
Posts: 27,011
Likes: 7,106
Liked 48,563 Times in 9,217 Posts
Default

Cleanup accomplished.


Help us out, folks.

Use the at top right of every post to report obnoxious behavior. We don't see every post!
Carry on.
__________________
Regards,
Lee Jarrett
Reply With Quote
The Following 5 Users Like Post:
  #29  
Old 07-28-2018, 11:58 AM
Saudade's Avatar
Saudade Saudade is offline
US Veteran
Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C Transition From 9mm Shield To M&P 9C  
Join Date: Sep 2013
Location: SoCal, CA
Posts: 2,233
Likes: 733
Liked 1,034 Times in 668 Posts
Default

Yep. The fullsize mags will fit both 1.0 and 2.0 M&P compacts. The only difference is the size of the gap.

I use Xgrips to adapt my FS mags (I have a FS 1.0) to my 9C (also 1.0). At the range I even shoot my 9C without the Xgrip to get a feel for how the grip changes.

Sadly, being in CA I'm limited to 10 rounds, so other than the grip change, there's no real advantage to using FS mags. Still, it means I have plenty of spare mags for the 9C.

Last edited by Saudade; 07-28-2018 at 12:00 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2" M&P Transition, 4" 38/44HD Transition-RECEIVED LLOYD17 S&W Hand Ejectors: 1896 to 1961 40 09-01-2017 12:21 PM
Transition 3rd .44 spl. 6 1/2 in. help Bill Bates S&W Hand Ejectors: 1896 to 1961 9 01-26-2013 07:46 PM
38/44 Transition PattonTime S&W Hand Ejectors: 1896 to 1961 6 01-07-2013 08:12 AM
Transition from .38 to .357 - why? Triggernosis S&W Revolvers: 1980 to the Present 27 01-01-2010 09:55 PM
38-44 Transition delta-419 S&W Hand Ejectors: 1896 to 1961 7 12-20-2009 01:32 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:04 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)