I guess I should have asked this before I ordered, but I'm wondering it this magpul stock will fit on my gun? I'm pretty sure it will, just checking.
MOE Carbine Stock, Mil-Spec Version [MAG400] - $59.95 : ++ Magpul Industries ++

And these should fit on there too shouldn't they?
Ladder Rail Protectors [MAG013] - $11.95 : ++ Magpul Industries ++

both will fit

Thanks. Can't wiat to get em!!!

As stated above, both will fit.

I have the MOE stock. I am seriously thinking of upgrading to the CRT one in this link. It has two locks, vs the one for MOE.
CTR Carbine Stock, Mil-Spec Version [MAG310] - $97.00 : ++ Magpul Industries ++

i agree with 27 Beck. it's worth the $40. the CTR is pretty damn solid. drastic improvement over the stock collapsible.

My factory 15-22 seemed fairly tight. Is the Magpul MOE worse than the factory?

What is the difference in the two, besides the extra lock? I was going to get it but I didn't see any reason to pay $40.00 more dollars just because of that.

The other lever engages a small plate inside the Magpul stock that pushes up and against the tube. This keeps the stock and tube from rattling against each other.

If rattles bother you, the CTR is the stock to get, period. If rattles don't bother you, then there are lots of stocks from many manufactures to chose from if you wish to change from the factory S&W stock.

MOE better than OE. CRT better than MOE.

So is the stock that I mentioned worse than the stock one that comes on the 15-22? I have no problem with the original on the gun, and when you say rattle, do you mean you can sit there and move it around or what?

The stock you mentioned (MOE)is better than what comes with the 15-22. There will be slight rattle with MOE, less than the origional. The CRT does not rattle. Rattle bothers some peeps, others don't care.

The CRT is the same stock that comes factory on the Wilson M4(pretty darn sweet). I will agree with 27 Beck. The second lock is not only a lock but will also push down on the pin to remove the stock for cleaning, unlike the MOE you have to grab the pin and grit your teeth to get it off. Thats how my Moe is on my Daniel Defence M4. I will be upgrading my M4 and my 15-22 with this stock. Go with the CRT and you will love it.

The CRT is way too bulky and heavy. I prefer the LCD or LED version.