Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Rifles and Shotguns > Smith & Wesson M&P15 Rifles
o

Notices

Smith & Wesson M&P15 Rifles Dedicated to the Smith & Wesson M&P-15 Rifles


Reply
 
Thread Tools Display Modes
  #1  
Old 03-31-2012, 10:02 PM
2001gmc's Avatar
2001gmc 2001gmc is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2010
Location: North Central Arkansas
Posts: 506
Likes: 400
Liked 167 Times in 97 Posts
Default M&P 15 Cleaning Cloth/ Cleaning Paste

What type of cloth do you use to wipe down the outside of the gun that wont leave any lint on the black finish? I was told to use paste to clean inside of barrel. I guess Frog Lube would be good and what do you all use? Thanks!
__________________
M&P15,9MM,M66,22-A,Glock 30SF
Reply With Quote
  #2  
Old 03-31-2012, 11:36 PM
JaPes's Avatar
JaPes JaPes is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by 2001gmc View Post
What type of cloth do you use to wipe down the outside of the gun that wont leave any lint on the black finish?
I use rags made from old cut up T-Shirts, moistened with a little RemOil.

I have a 15-Sport. If I'm not worried about dust getting into my rifle's action, I'm not so worried about lint on the surface.

Quote:
Originally Posted by 2001gmc View Post
I was told to use paste to clean inside of barrel. I guess Frog Lube would be good and what do you all use? Thanks!
Paste? I guess I must be old school. I use good old Hoppes No.9, patches, bronze brush, & more patches. I end by pulling a CLP moistened patch through the barrel.

I to clean out the chamber, I have a chamber cleaning brush like this:



A couple twists, wipe, a few cotton swabs for the lugs and I'm done.

And for the BCG:



^Not necessary, but makes the job easier.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 04-01-2012, 09:50 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

I use Hoppes occasionally but mostly I use Tri-Flow for cleaning and lubricating....but wanting to get some of that Royal Purple gun lube or motor oil for lubing. Like was said before I really dont think about the outside but I also use lint free cloths...i.e. old T-shirts and the such
__________________
Grover Oathkeeper
Reply With Quote
  #4  
Old 04-01-2012, 09:53 AM
TangoFoxtrot's Avatar
TangoFoxtrot TangoFoxtrot is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Sep 2011
Location: Nowhereville, USA
Posts: 767
Likes: 139
Liked 315 Times in 191 Posts
Default

Another old school guy here too. Hoppes #9, bChamber and bore brushes along with patches. Then I top it off with Militec or Rem Oil.
Reply With Quote
  #5  
Old 04-01-2012, 10:10 AM
2001gmc's Avatar
2001gmc 2001gmc is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2010
Location: North Central Arkansas
Posts: 506
Likes: 400
Liked 167 Times in 97 Posts
Default

J-BŪ BORE COMPOUND & KROIL - Brownells

This is what the guy I bought the gun from cleaned it with before I took it out the door. He also had a nice solid cleaning rod with a nice handle on the end of it that turned with the rifling while pulling it in and out. He was showing me on each patch the little copper pieces on each patch as we were cleaning some so small that had to move it around in the light to see till they were all gone then he lubed it with the Kroil. My cleaning rod is 3 pieces and does not rotate while pulling it in and out. Appears this is almost a must to get all the fine copper pieces out of the rifling. I've always used Hoppies #9 also to clean but he told me to use the Hoppies and then use this after cleaning with the Hoppies just to see what all the Hoppies was leaving behind. His cleaning rod also had the brass Jag on the end instead of the hoop type end seemed to work real well. I was just kinda wondering if any of you guys used this method and how it worked for you. I would tell someone they were full of **** if I had not see this with my own eyes on the stuff this paste was getting cleaned out of the rifling's. I know I just want to do the best cleaning on this new M&P15 and looking for you guys opinions also. Thanks!!
__________________
M&P15,9MM,M66,22-A,Glock 30SF
Reply With Quote
  #6  
Old 04-02-2012, 06:44 AM
TangoFoxtrot's Avatar
TangoFoxtrot TangoFoxtrot is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Sep 2011
Location: Nowhereville, USA
Posts: 767
Likes: 139
Liked 315 Times in 191 Posts
Default

Cleaning an AR is the least fun aspect of owning one.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 04-02-2012, 09:24 AM
crracer_712's Avatar
crracer_712 crracer_712 is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Apr 2011
Location: SE Kansas
Posts: 1,206
Likes: 139
Liked 404 Times in 242 Posts
Default

I like to wipe the outside of mine down with Rem Oil.

You might try using a tampon, they might be lint free....
__________________
Rod
M&P 22A, 40c, 15A, 15-22
Reply With Quote
  #8  
Old 04-02-2012, 09:26 AM
crracer_712's Avatar
crracer_712 crracer_712 is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Apr 2011
Location: SE Kansas
Posts: 1,206
Likes: 139
Liked 404 Times in 242 Posts
Default

Any basic cleaning kit, the cleaning rod handle swivels on the actual cleaning rod. I can't imagine using one that doesn't and am surprised you have one made this way?? Perhaps your cleaning rod is from a black powder gun kit.

Quote:
Originally Posted by 2001gmc View Post
J-BŪ BORE COMPOUND & KROIL - Brownells

This is what the guy I bought the gun from cleaned it with before I took it out the door. He also had a nice solid cleaning rod with a nice handle on the end of it that turned with the rifling while pulling it in and out. He was showing me on each patch the little copper pieces on each patch as we were cleaning some so small that had to move it around in the light to see till they were all gone then he lubed it with the Kroil. My cleaning rod is 3 pieces and does not rotate while pulling it in and out. Appears this is almost a must to get all the fine copper pieces out of the rifling. I've always used Hoppies #9 also to clean but he told me to use the Hoppies and then use this after cleaning with the Hoppies just to see what all the Hoppies was leaving behind. His cleaning rod also had the brass Jag on the end instead of the hoop type end seemed to work real well. I was just kinda wondering if any of you guys used this method and how it worked for you. I would tell someone they were full of **** if I had not see this with my own eyes on the stuff this paste was getting cleaned out of the rifling's. I know I just want to do the best cleaning on this new M&P15 and looking for you guys opinions also. Thanks!!
__________________
Rod
M&P 22A, 40c, 15A, 15-22
Reply With Quote
  #9  
Old 04-02-2012, 09:29 AM
crracer_712's Avatar
crracer_712 crracer_712 is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Apr 2011
Location: SE Kansas
Posts: 1,206
Likes: 139
Liked 404 Times in 242 Posts
Default

I've heard it say that you can over clean a bore and wear the bore out faster by over cleaning then you can by shooting. I wonder if this paste stuff attributes to this. It might not be something a person wants to use exclusively, all the time, every time?
__________________
Rod
M&P 22A, 40c, 15A, 15-22
Reply With Quote
  #10  
Old 04-02-2012, 09:33 AM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

Quote:
Originally Posted by JaPes View Post
I use rags made from old cut up T-Shirts, moistened with a little RemOil.

I have a 15-Sport. If I'm not worried about dust getting into my rifle's action, I'm not so worried about lint on the surface.



Paste? I guess I must be old school. I use good old Hoppes No.9, patches, bronze brush, & more patches. I end by pulling a CLP moistened patch through the barrel.

I to clean out the chamber, I have a chamber cleaning brush like this:



A couple twists, wipe, a few cotton swabs for the lugs and I'm done.

And for the BCG:



^Not necessary, but makes the job easier.
I do the same except I use the blue workshop paper towels from autozone, plus I use the cotten swabs around the end of the gas tube to clean under and around it and around the hammer and springs and I dont have the BCG tool.

Last edited by GMC man; 04-02-2012 at 09:35 AM.
Reply With Quote
  #11  
Old 04-02-2012, 09:39 AM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

Quote:
Originally Posted by TangoFoxtrot View Post
Cleaning an AR is the least fun aspect of owning one.
I always enjoyed cleaning mine after a good day of shooting but then again I was a Uncle Sam's Misguided Child and everyone knows there is something wrong with us lol

Last edited by GMC man; 04-02-2012 at 09:43 AM.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 04-02-2012, 10:16 AM
BoDog BoDog is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Nov 2010
Location: central Kalifornia
Posts: 176
Likes: 71
Liked 22 Times in 14 Posts
Default

J-B is a wonderful barrel cleaner, I have restored several rifles to tack drivers with it. Had one pre 64 mod 70 that had a barrel that looked like a sewer pipe when delivered to me by my dentist to clean.
He was of the school of put oil down it and put it in the closet. I started with Hoppies and a bore brush, after an hour or so I change to J-B then hours of more cleaning before it came out clean.
Groups went from 3 inch area to under one inch. Not bad for a 30-06.
That said remember J-B is an abrasive a very fine one but still an abrasive over use can wear a barrel. Just get the bore nice and shiney
and it will pick up less copper. Hold the J-B off for times when many rounds have been fired.
Reply With Quote
  #13  
Old 04-02-2012, 11:47 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

No disrespect meant but any decent 30-06 should shoot groups less than 1" at 100 yards(which is the distance I presume you were referring to) I have a hard time with abrasives in a rifle barrel. On my WWII and even my 1918 Mauser the bores were pretty cruddy. I took a brass/bronze bore brush and wound a little steel wool in it to clean them back to bright and shiny. IMHO abrasives in a rifle bore just shorten the life of the rifle. But to each his own but remember how tiny the lands and grooves are in an AR and think about how few times you could use abrasives until you had a smoothbore.
__________________
Grover Oathkeeper
Reply With Quote
The Following User Likes This Post:
  #14  
Old 04-02-2012, 01:13 PM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
No disrespect meant but any decent 30-06 should shoot groups less than 1" at 100 yards(which is the distance I presume you were referring to) I have a hard time with abrasives in a rifle barrel. On my WWII and even my 1918 Mauser the bores were pretty cruddy. I took a brass/bronze bore brush and wound a little steel wool in it to clean them back to bright and shiny. IMHO abrasives in a rifle bore just shorten the life of the rifle. But to each his own but remember how tiny the lands and grooves are in an AR and think about how few times you could use abrasives until you had a smoothbore.
Neat trick I will have to remember that one with the steel wool, and I agree with you about the abrasives. just using solvent cleaned our rifles good enough to pass inspection at the armory without damaging the barrels. I would imagine that if the military would allow abrasives to be used to clean the barrels they would be replacing them every 6 months lol.

I did forget to post one more trick I use I take a stripper clip and push the brass insert 1/2 out and use that to scrape the inside of the bolt, it doesnt damage the chrome then take 4 q-tips soaked in solvent and let them sit in the seats for awhile while I clean elsewhere after 10 mins I twist them around several times and remove them and its nice and clean, I learned that trick in the corps

Last edited by GMC man; 04-02-2012 at 01:17 PM.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 04-02-2012, 05:34 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

GMC...you know there would be some lifer DI who would teach his boots to use the abrasives and it would just spread from there, and as often as the Corps gets new things, we would be sending soldiers to battle with smoothbores.
__________________
Grover Oathkeeper
Reply With Quote
  #16  
Old 04-02-2012, 05:52 PM
BoDog BoDog is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Nov 2010
Location: central Kalifornia
Posts: 176
Likes: 71
Liked 22 Times in 14 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
No disrespect meant but any decent 30-06 should shoot groups less than 1" at 100 yards(which is the distance I presume you were referring to) I have a hard time with abrasives in a rifle barrel. On my WWII and even my 1918 Mauser the bores were pretty cruddy. I took a brass/bronze bore brush and wound a little steel wool in it to clean them back to bright and shiny. IMHO abrasives in a rifle bore just shorten the life of the rifle. But to each his own but remember how tiny the lands and grooves are in an AR and think about how few times you could use abrasives until you had a smoothbore.
Agreed that any good 30-06 should do an inch at 100 yds. but remember I only cleaned the barrel,no bedding , *** scope and no loading work up.
My personal Rem. 30-06 will shoot a slot one bullet wide 3 bullets high at 100 yds. My pillar bedded Sav. 30.06 will do half in. If I do my part, if any of my varmint rifles exceede 1/2 inch with junk ammo I get concerned. By the way my M-1A match rifle will do 1 in. at 100 with iron sights.
Most bench rest shooters do basic cleaning with brake cleaner and only resort to JB in last option.

Last edited by BoDog; 04-02-2012 at 06:06 PM.
Reply With Quote
  #17  
Old 04-02-2012, 05:54 PM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

lol tell me about it, the new and not almost used up we had, was donated to us from the other services,without their knowledge of course
Reply With Quote
  #18  
Old 04-02-2012, 06:00 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Quote:
Originally Posted by BoDog View Post
Agreed that any good 30-06 should do an inch at 100 yds. but remember I only cleaned the barrel,no bedding , *** scope and no loading work up.
My personal Rem. 30-06 will shoot a slot one bullet wide 3 bullets high at 100 yds. My pillar bedded Sav. 30.06 will do half in. If I do my part, if any of my varmint rifles exceede 1/2 inch with junk ammo I get concerned. By the way my M-1A match rifle will do 1 in. at 100 with iron sights.
Most bench rest shooters do basic cleaning with break cleaner and only resort to JB in last resort.
After cleaning the barrels on my Mausers they did about an inch with Irons but well under an inch with optics, now they are bedded and all cloverleaf @ 100 but I do have to change the settings for some of the handloads I have. My handloads run from 125gr varmint rounds to 185 gr deer rounds.

But Just like GMCMan said in the Corps we got the hand me downs from the Army National Guard and still had to qualify to 500 yards with irons.
__________________
Grover Oathkeeper
Reply With Quote
  #19  
Old 04-02-2012, 09:41 PM
2001gmc's Avatar
2001gmc 2001gmc is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2010
Location: North Central Arkansas
Posts: 506
Likes: 400
Liked 167 Times in 97 Posts
Default

Quote:
Originally Posted by crracer_712 View Post
Any basic cleaning kit, the cleaning rod handle swivels on the actual cleaning rod. I can't imagine using one that doesn't and am surprised you have one made this way?? Perhaps your cleaning rod is from a black powder gun kit.
My rod is made to rotate but is just such a cheap rod that it dont when you got all that pressure on it pushing it through the bore.
__________________
M&P15,9MM,M66,22-A,Glock 30SF
Reply With Quote
  #20  
Old 04-03-2012, 12:11 AM
crracer_712's Avatar
crracer_712 crracer_712 is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Apr 2011
Location: SE Kansas
Posts: 1,206
Likes: 139
Liked 404 Times in 242 Posts
Default

Hey they sell them at Walmart you know??

I picked up the Hoppes 30.00 kit, it had a 3 piece brass cleaning rod that spins freely. Comes with about all the brass brushes you'd need for about any caliber as well.
__________________
Rod
M&P 22A, 40c, 15A, 15-22

Last edited by crracer_712; 04-03-2012 at 12:14 AM.
Reply With Quote
The Following User Likes This Post:
  #21  
Old 04-03-2012, 08:16 AM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

I like the new rod from Winchester that walmart sells, it's a one piece rod that does rotate and works very well.
Reply With Quote
The Following 2 Users Like Post:
  #22  
Old 04-03-2012, 10:49 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Quote:
Originally Posted by GMC man View Post
I like the new rod from Winchester that walmart sells, it's a one piece rod that does rotate and works very well.
I have been looking at that rod, I guess I will have to go get one now that I know someone who has vouched for it.
__________________
Grover Oathkeeper
Reply With Quote
The Following User Likes This Post:
  #23  
Old 04-03-2012, 11:55 AM
Grjfer's Avatar
Grjfer Grjfer is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Jan 2012
Location: Twin Lakes Area, Arkansas
Posts: 381
Likes: 248
Liked 124 Times in 88 Posts
Default

I use that Winchester rod as well. Works great, and under 6 bucks.
__________________
M&P9/9C/Shieldx2/Sportx2/15-22
Reply With Quote
The Following 2 Users Like Post:
  #24  
Old 04-03-2012, 01:14 PM
heatheroo heatheroo is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Posts: 69
Likes: 2
Liked 42 Times in 17 Posts
Default

Quote:
Originally Posted by TangoFoxtrot View Post
Cleaning an AR is the least fun aspect of owning one.
Most of my recreational shooting is with a flintlock. By comparison, cleaning my Sport is downright enjoyable.
Reply With Quote
  #25  
Old 04-03-2012, 02:32 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Quote:
Originally Posted by heatheroo View Post
Most of my recreational shooting is with a flintlock. By comparison, cleaning my Sport is downright enjoyable.
We have taking our barrels off of our cap locks and soap and water and a brass brush in the shower down pat....then a little bore butter and all is good....LOL
__________________
Grover Oathkeeper
Reply With Quote
  #26  
Old 04-03-2012, 02:52 PM
heatheroo heatheroo is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Posts: 69
Likes: 2
Liked 42 Times in 17 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
We have taking our barrels off of our cap locks and soap and water and a brass brush in the shower down pat....then a little bore butter and all is good....LOL
removing a pinned barrel from a long rifle (vs. a hawken style caplock) for cleaning is not generally done. I've got my routine down pretty well. Still involves cold/soapy water and multiple patches.
Reply With Quote
  #27  
Old 04-03-2012, 04:58 PM
ocinsomniac's Avatar
ocinsomniac ocinsomniac is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: N Georgia
Posts: 184
Likes: 89
Liked 72 Times in 55 Posts
Default

I use this stuff for cleaning the bore and any other section of my gun that has carbon or copper deposits........let it soak in for awhile, then swab out works great. I get it in either the 8 or 12 oz bottles locally -

Bore Shine Bore Cleaning Solvent 4oz Liquid

Then I use Remington or Slick 50 spray for lube & metal protection.
Reply With Quote
  #28  
Old 04-03-2012, 05:27 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Quote:
Originally Posted by heatheroo View Post
removing a pinned barrel from a long rifle (vs. a hawken style caplock) for cleaning is not generally done. I've got my routine down pretty well. Still involves cold/soapy water and multiple patches.
To remove the barrel from my TC you remove the wedge pin and it comes right out. In fact TC sent the pin puller as an accessory with the rifle. Thats how they recommend cleaning it. My wifes CVA you have to use a pin punch but its no step for a stepper.
__________________
Grover Oathkeeper

Last edited by oneyeopn; 04-03-2012 at 05:36 PM.
Reply With Quote
  #29  
Old 04-03-2012, 07:39 PM
teamwoody teamwoody is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Posts: 16
Likes: 7
Liked 48 Times in 6 Posts
Thumbs up

Quote:
Originally Posted by 2001gmc View Post
What type of cloth do you use to wipe down the outside of the gun that wont leave any lint on the black finish? I was told to use paste to clean inside of barrel. I guess Frog Lube would be good and what do you all use? Thanks!
I use a micro-fiber towel with a couple of squirts of Break Free CLP. Micro-fiber = lint free and no scratches. For the Bore I use Smith & Wesson Bore Gel or good old Hoppes #9. As far as cleaning rods go I prefer a solid one piece carbon fiber from Tipton.
Reply With Quote
  #30  
Old 04-03-2012, 07:57 PM
heatheroo heatheroo is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Feb 2012
Posts: 69
Likes: 2
Liked 42 Times in 17 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
To remove the barrel from my TC you remove the wedge pin and it comes right out. In fact TC sent the pin puller as an accessory with the rifle. Thats how they recommend cleaning it. My wifes CVA you have to use a pin punch but its no step for a stepper.
I haven't had the barrel out of my rifle since I completed the build back around 1988.
Reply With Quote
  #31  
Old 04-03-2012, 10:05 PM
2001gmc's Avatar
2001gmc 2001gmc is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2010
Location: North Central Arkansas
Posts: 506
Likes: 400
Liked 167 Times in 97 Posts
Default

Quote:
Originally Posted by GMC man View Post
I like the new rod from Winchester that walmart sells, it's a one piece rod that does rotate and works very well.
I wish I could find this they didn't have a 1 piece rod when I was at my local walmart.
__________________
M&P15,9MM,M66,22-A,Glock 30SF
Reply With Quote
  #32  
Old 04-04-2012, 07:36 AM
batmann batmann is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Jun 2003
Location: Greenwood, IN USA
Posts: 446
Likes: 18
Liked 67 Times in 49 Posts
Default

I use microfiber towels to wipe the exterior of my M&P MOE. For oil I use SLIP 2000 EWL, I seldom need oil as I wipe the excess oil used from the cleaning/lube and that seems to cover everthing pretty well.
Reply With Quote
  #33  
Old 04-04-2012, 09:20 AM
GMC man GMC man is offline
US Veteran
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Mar 2012
Location: NC
Posts: 592
Likes: 751
Liked 305 Times in 193 Posts
Default

Quote:
Originally Posted by 2001gmc View Post
I wish I could find this they didn't have a 1 piece rod when I was at my local walmart.
Its out of stock at walmart right now
Walmart.com: Winchester 99701 Rifle Cleaning Rod: Hunting
Reply With Quote
  #34  
Old 04-04-2012, 09:47 AM
MPDC's Avatar
MPDC MPDC is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Dec 2010
Location: sw Florida
Posts: 664
Likes: 77
Liked 178 Times in 116 Posts
Default

Be careful using a steel rod without a bore guide, especially IF you are not experienced or are new to the AR.

Also, Frog Lube is great stuff, superior to conventional chemicals in many ways. Just use a copper solvent occasionally. The non toxic and very effective corrosion protection is fantastic.
Reply With Quote
  #35  
Old 04-06-2012, 03:50 AM
NewFuture2012's Avatar
NewFuture2012 NewFuture2012 is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Nov 2010
Location: Boise, ID
Posts: 7
Likes: 2
Liked 0 Times in 0 Posts
Default

I use the Bore Snake with CLP. Anything wrong with those?
__________________
God Bless America!
Reply With Quote
  #36  
Old 04-06-2012, 04:12 PM
MPDC's Avatar
MPDC MPDC is offline
Member
M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste M&P 15 Cleaning Cloth/ Cleaning Paste  
Join Date: Dec 2010
Location: sw Florida
Posts: 664
Likes: 77
Liked 178 Times in 116 Posts
Default

Quote:
Originally Posted by NewFuture2012 View Post
I use the Bore Snake with CLP. Anything wrong with those?
Absolutely not . I just like the Frog Lube because it is easier on the smell, non toxic and superior rust prevention. It is a CLP too and great around wet environments.
Reply With Quote
Reply

Tags
brownells, flintlock, lock, military, remington, scope, solvent, winchester, wwii

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is there one gun cleaning cloth that is Cackmandu S&W-Smithing 2 04-04-2016 10:51 PM
Cleaning cloth pacecars S&W-Smithing 6 01-21-2015 06:12 AM
Sale on Cleaning Kits, Limited Supply, New Star PD .45 Cleaning kits. sirrduke2010 Accessories/Misc - For Sale or Trade 22 08-17-2011 05:11 PM
KleenBore Lead Away cleaning cloth - good sonny The Lounge 6 10-28-2009 03:26 AM
Cleaning cloth truck seats ? ? ? Senior Citizen The Lounge 7 05-15-2009 07:31 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:20 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)