Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Rifles and Shotguns > Smith & Wesson M&P15 Rifles
o

Notices

Smith & Wesson M&P15 Rifles Dedicated to the Smith & Wesson M&P-15 Rifles


Reply
 
Thread Tools Display Modes
  #1  
Old 05-06-2012, 11:29 AM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default New to AR's? Here are some tools I use to clean.

We have a bunch of new members who are new to the AR platform. While we have fun adding furniture and accessories, one aspect of AR ownership that gets overlooked is cleaning.

I don't intend for this thread to devolve into cleaning arguments similar to those I have seen on other forums. For this thread, I think we can all agree on the basics of cleaning.
  • Clean barrel/bore
  • Clean chamber
  • Clean bolt carrier group

This can be accomplished using very basic tools: rods, brushes, patches. There are several YouTube videos that illustrate the basic cleaning process.

There are tools beyond basic tools that can help make the cleaning process easier. I'm going to show some tools I own and tried out. I emphasize that none of these tools are necessary, but the make the job faster & easier.

The subject of lube choice & cleaning solvent choice is for a different thread.

Otis flexible rod cleaning kit:



It replaces a one piece rod in favor of a polymer coated cable. This makes it easy to clean from breech to muzzle without worrying about dinging up the chamber or rifling. It uses brushes and patches just like we're used to.
Gunslick AR-15 Bore Guide:




If you use a one piece rod, then a bore guide makes the process easier with less worries about dinging up the chamber or rifling. The bore guide fits snugly into place. Push the rod through the bore guide. The bore guide has a port that matches to the ejection port of the AR. It is through this port that you can add solvents/lube to the patches, or spray cleaner down the barrel.
Hoppes Bore Snake




The bore snake is a pull through string that has bronze cleaning bristles integrated into it. Put some cleaning solvent on the section before the bristles, & pull through breech to muzzle.

In one pass it applies solvent, brushes, and swabs out the barrel. I usually pull the bore snake through three times. The bore snake can be washed and reused many times.
Talon Tactical Lug Scraping Tool






I use this tool when the lugs are seriously carbon fouled. The tool can clean the sides of the lugs. Gentle pressure and a twisting/pull motion is all that is necessary.



It also cleans the face of the lugs that we can't easily see.



When contacting the face of the lug, light pressure and a twist scrapes off carbon deposits.

The Talon Tactical Lug Scraper also accepts any standard cleaning attachment on it's tip. It can be used as a cleaning device as illustrated in the next section.
Chamber Brushes
The chamber is bigger than the bore. I use one of two different tools to clean out the chamber. Both set ups are shown attached to the Talon Tactical lug scraper.

.40 Cal brush





I wet the brush with solvent, and scrub out the chamber. I then wrap a clean patch around the brush to swab out the chamber.

AR-15 Chamber Brush





Cleans the chamber & brushes the lugs.
CAT M4 BCG Cleaning Tool
By far the most useful cleaning tool I use.



It scrapes carbon deposits from the bolt tail with a quick and easy twisting motion.



It scrapes carbon from the BCG. Affix a patch to swab out the fouling.





It also can be used to scrape carbon deposits from the firing pin.

Dental Pick


The good old dental pick. Works like a charm every time. Gets into hard to reach areas to scrape off carbon deposits. Just be careful using it. Use just enough pressure to remove carbon, but not ding up the metal.
There are also some other tools I find useful to have on hand.

Ejector Spring Installation/Removal Jig


In order to remove/replace the ejector spring on the bolt, the ejector must be compressed. Then a small retaining roll pin must be driven out. The jig makes this job quick and simple.

Stock Wrench


If you ever have to install/remove the stock castle nut, you'll need a stock wrench. I prefer to use the top castle nut wrench with the red handle. It provides a longer handle for leverage and grip. It also has three contact points for a more secure purchase onto the castle nut.

The spanner wrench on the bottom works, but it's more of a pain to use. The shorter handle provides less leverage. It only has a single contact point. If you're not careful, the spanner wrench will slip off the castle nut and you could end up scratching your AR.
Front Sight Tool



Makes adjusting the front sight easier. Just put it over the front sight, gently push down and twist.

If anyone else has other tools they use to maintain their AR's, post them up for other member's reference.

-John
__________________
-John
Reply With Quote
  #2  
Old 05-06-2012, 11:34 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

JaPes...you covered it very well and showed some tools that I dont have but after this posting I will get, cleaning the locking lugs has been one of the hardest things I have to do and without the right tool it is a bear. Also the bore guide looks pretty handy. Thank You Sir.
Grover
__________________
Grover Oathkeeper
Reply With Quote
  #3  
Old 05-06-2012, 11:45 AM
Splittiebus66's Avatar
Splittiebus66 Splittiebus66 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: ^_^ INNA DA WOODS SE PA
Posts: 189
Likes: 4
Liked 92 Times in 51 Posts
Default

A 12 gauge brush and bore mop work well for the chamber too.
__________________
CLEAR!
Reply With Quote
The Following User Likes This Post:
  #4  
Old 05-06-2012, 12:15 PM
Vic 103 Vic 103 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2012
Posts: 52
Likes: 0
Liked 39 Times in 22 Posts
Default

Nice post JaPes! You have shown me some tools I have never seen before.
Reply With Quote
  #5  
Old 05-06-2012, 02:55 PM
Elevenbravo87's Avatar
Elevenbravo87 Elevenbravo87 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2010
Location: Georgia
Posts: 12
Likes: 0
Liked 0 Times in 0 Posts
Default

I will have to get some of the tools you have listed, especially thelug cleaning and BCG scraper.

I have been using the old school M16 cleaning kit. Guess I need to get with modern times
Reply With Quote
  #6  
Old 05-06-2012, 03:45 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by Elevenbravo87 View Post
I have been using the old school M16 cleaning kit. Guess I need to get with modern times
I have an old school cleaning kit too. Use it right and it works fine. IMO, just as learning to shoot with iron sights is a valuable skill, learning to clean with a standard kit is a valuable skill too.

I like to try out tools that purport to save time. The CAT M4 definitely saves time.

Here's a video of the CAT M4 and Talon Lug Tool.

CAT-M4 & Talon - YouTube

I said I wouldn't mention solvents, but there is one carbon cleaning solvent that I know works every time.



SeaFoam motor treatment. Any of you who own a vehicle with a carburetor should already be familiar with SeaFoam. I disassemble the BCG & bolt, and let the parts soak in some SeaFoam to start to dissolve & loosen carbon deposits.

For the new guys who have AR's with delta rings and want to change out hand guards, getting an AR hand guard tool makes the job much easier.

I used to change hand guards by compressing the delta ring by hand. Changing hand guards by hand, by myself, was time consuming, frustrating, and frustrating. I broke down and bought a $10 hand guard tool.

I shot a video:

AR Delta Ring Compression Tool - YouTube

Also for the new guys, a video on how to swap out a butt stock. I shot this to help out a friend who just couldn't get it.

M4 Stock Removal. Install Magpul MOE. - YouTube
__________________
-John
Reply With Quote
  #7  
Old 05-06-2012, 06:08 PM
ZeroTolerance6's Avatar
ZeroTolerance6 ZeroTolerance6 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Dec 2011
Posts: 116
Likes: 57
Liked 65 Times in 38 Posts
Default

JaPes,
Great post. You just made my shopping list a little longer.
Reply With Quote
  #8  
Old 05-06-2012, 07:59 PM
Danny2tek Danny2tek is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2012
Location: Miami
Posts: 90
Likes: 290
Liked 17 Times in 12 Posts
Default

I'm adding that BCG tool to the cleaning kit
__________________
M&P15 Sport-M&P9c-SW9VE
Reply With Quote
The Following User Likes This Post:
  #9  
Old 05-06-2012, 08:39 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by ZeroTolerance6 View Post
JaPes,
Great post. You just made my shopping list a little longer.
Its my goal to be the enabler for my fellow firearms enthusiasts.
__________________
-John
Reply With Quote
The Following 4 Users Like Post:
  #10  
Old 05-07-2012, 12:20 AM
smithman 10's Avatar
smithman 10 smithman 10 is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2005
Location: Virginia
Posts: 749
Likes: 2,225
Liked 1,234 Times in 369 Posts
Default Talon Lug Scraper

What is that lug scraper made out of?

Is it aluminum or steel? If it is steel don't you have to be mighty careful with it?

Just asking.
Reply With Quote
  #11  
Old 05-07-2012, 12:26 AM
Sprefix's Avatar
Sprefix Sprefix is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2009
Location: 61N149W
Posts: 2,916
Likes: 1,426
Liked 1,104 Times in 550 Posts
Default

How much for the complete kit in your arsenal of cleaners? I'd prolly be interested.............
__________________
Go big or stay home
Reply With Quote
  #12  
Old 05-07-2012, 08:20 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by Sprefix View Post
How much for the complete kit in your arsenal of cleaners? I'd prolly be interested.............
  • I picked up a multi-caliber Otis kit on sale for $40.
  • The CAT M4 tool cost me about $30.
  • The Gunslick bore guide was $25.
  • The Talon Lug Tool was $32.
  • The .22cal Boresnake was $12.
  • The AR Chamber brush was $5.50.
  • The ejector install/removal jig was $35.
  • The 3-prong AR wrench was $8.
  • The front sight tool was $9.
  • The dental pick was a couple bucks at a gun show.

I wish I never totaled it up just now. It seems a bit nuts, but the tools were accumulated over time.

I keep everything I need to work on a firearm in my re-purposed fishing tackle box. I have a bottle of Hoppes No.9, Slip2000 degreaser, and lubricants in there.

__________________
-John
Reply With Quote
  #13  
Old 05-07-2012, 08:25 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by smithman 10 View Post
What is that lug scraper made out of?

Is it aluminum or steel? If it is steel don't you have to be mighty careful with it?

Just asking.
"The tool head is made of 400 series stainless steel. The choice of material was made to insure that the talons would be brittle. If the tool head gets damaged it is designed to break instead of bending. Because, a bent tool could get hung up in the chamber. But, if one of the talons should break-off, there are still seven more to do the job. "
Source: Buy Talon, AR-15, Gun, Cleaning Tool, Gun Cleaning Tool, AR-15 Cleaning Kit
__________________
-John
Reply With Quote
  #14  
Old 05-07-2012, 08:37 PM
Hobie1's Avatar
Hobie1 Hobie1 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Nov 2010
Location: West Central IL
Posts: 1,028
Likes: 477
Liked 325 Times in 148 Posts
Default

Nice!!! Make me up a kit like that and I'll gladly pay you Tuesday. Looks like you've got it covered. Hand Salute!

Hobie
__________________
Laissez les bons temps roulez!
Reply With Quote
The Following User Likes This Post:
  #15  
Old 05-07-2012, 08:39 PM
philevans philevans is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Nov 2004
Location: austin, texas
Posts: 108
Likes: 17
Liked 58 Times in 36 Posts
Default

thank you for this informative thread.
__________________
A&M'61,NRAlife'61.
Reply With Quote
  #16  
Old 05-07-2012, 09:45 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by Hobie1 View Post
Nice!!! Make me up a kit like that and I'll gladly pay you Tuesday. Looks like you've got it covered. Hand Salute!

Hobie
LOL! Thanks!

I don't think you want to see my re-supply drawer... or the Brownells small parts mailing boxes with spare firearms parts in it. I like to keep common wear & tear parts on hand.

For my AR's I keep the following spare parts on hand:
  1. Firing pin.
  2. The little extractor "O" ring and spring.
  3. Safety detent & detent spring. (Can you guess why? LOL)
  4. Rear take down pin detent & detent spring.
  5. A Carbine buffer.
  6. Trigger springs.

Nothing is more frustrating than waiting for a part to arrive in the mail when you need it right now.
__________________
-John

Last edited by JaPes; 05-07-2012 at 09:51 PM.
Reply With Quote
The Following 2 Users Like Post:
  #17  
Old 05-07-2012, 10:45 PM
smithman 10's Avatar
smithman 10 smithman 10 is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2005
Location: Virginia
Posts: 749
Likes: 2,225
Liked 1,234 Times in 369 Posts
Default Talon - I'm getting me one

Quote:
Originally Posted by JaPes View Post
"The tool head is made of 400 series stainless steel. The choice of material was made to insure that the talons would be brittle. If the tool head gets damaged it is designed to break instead of bending. Because, a bent tool could get hung up in the chamber. But, if one of the talons should break-off, there are still seven more to do the job. "
Source: Buy Talon, AR-15, Gun, Cleaning Tool, Gun Cleaning Tool, AR-15 Cleaning Kit
Thanks for the link and the info. Sounds like a real good piece of gear to have.
Reply With Quote
  #18  
Old 05-07-2012, 11:12 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by smithman 10 View Post
Thanks for the link and the info. Sounds like a real good piece of gear to have.
You're welcome.

I'm still on the fence about the Talon lug scraping tool. It works fine, but I think I can do just as well by swabbing the chamber & lugs with some SeaFoam, let it sit for a little, then use the AR chamber brush.

$32 v.s. $5.50

The one tools I enthusiastically endorse is the CAT M4 bolt cleaning tool. The .22 cal rifle boresnake is #2.
__________________
-John
Reply With Quote
The Following User Likes This Post:
  #19  
Old 05-08-2012, 12:04 AM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

An AR-15 with a direct impingement gas operated system routes a portion of the hot combustion gasses to cycle the action. The hot gasses are dirty & foul, and get blown into the action. The carbon fouling cakes onto portions of the BCG. It also builds up on the chamber lugs.

You'll see some AR BCG's with exotic applied finishes (ex: nickel boron, fail zero, etc..) which increase the lubricity of the bolt with claims of needing very little to no lube, and being resistant to carbon fouling because it doesn't stick to it.
__________________
-John

Last edited by JaPes; 05-08-2012 at 12:08 AM.
Reply With Quote
  #20  
Old 05-08-2012, 09:54 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

AXC products on Ebay has the chamber brushes for $2 and they work very well.
__________________
Grover Oathkeeper
Reply With Quote
The Following User Likes This Post:
  #21  
Old 05-09-2012, 05:50 PM
ocinsomniac's Avatar
ocinsomniac ocinsomniac is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: N Georgia
Posts: 184
Likes: 89
Liked 72 Times in 55 Posts
Default

Excellent and informative post......just ordered a Talon field cleaning duo. Been looking all over for just the right tool to clean out the lugs and BCG innards, and this looks like it! Thanks......
Reply With Quote
  #22  
Old 05-11-2012, 05:13 AM
NewFuture2012's Avatar
NewFuture2012 NewFuture2012 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Nov 2010
Location: Boise, ID
Posts: 7
Likes: 2
Liked 0 Times in 0 Posts
Default

Wow! This is one of the most useful threads for the newbie (me!) that I've seen. Thanks to all that have posted. I salute you!
__________________
God Bless America!
Reply With Quote
  #23  
Old 05-12-2012, 08:49 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

In the next couple weeks, I plan to take my on-again/off-again cleaning OCD to the next level.



2.5L Ultrasonic Cleaner!

I'm hoping to quickly clean a ...

Disassembled AR bolt, Ruger MKIII bolt, 15-22 Bolt, Ruger 10/22 bolt, small parts, maybe even a stripped 1911 frame...

I also have a different problem. I don't reload, yet I pick up my brass at the range and whatever abandoned brass strays into my immediate area. I've got some brass that needs cleaning.

Hopefully it will fit into my motto, "Work smarter, not harder."
__________________
-John
Reply With Quote
  #24  
Old 05-13-2012, 01:32 AM
Gatorade's Avatar
Gatorade Gatorade is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Apr 2012
Location: Texas
Posts: 56
Likes: 15
Liked 33 Times in 18 Posts
Default

Very good thread! I've got the full Otis kit with all the scrapers and brushes and whatnot, but that BCG tool looks mighty useful - I'll have to pick one up

Last edited by Gatorade; 05-13-2012 at 01:37 AM.
Reply With Quote
  #25  
Old 05-13-2012, 06:31 AM
ocinsomniac's Avatar
ocinsomniac ocinsomniac is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: N Georgia
Posts: 184
Likes: 89
Liked 72 Times in 55 Posts
Default

Just got my Talon Field Cleaning kit yesterday - my BCG and lug recess have not been as clean since my rifle was brand new.
Expensive but well worth it in the long run.
Reply With Quote
  #26  
Old 05-13-2012, 09:04 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

I discovered yesterday.****nning the Mobil 1 I didnt have near the carbon build up that I expected to find during an extensive disassemble and what was there cleaned right up pretty effortlessly.
__________________
Grover Oathkeeper
Reply With Quote
  #27  
Old 06-19-2012, 09:51 PM
stavman11's Avatar
stavman11 stavman11 is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2012
Location: The DESERT of Arizona
Posts: 983
Likes: 408
Liked 445 Times in 297 Posts
Default

WOW impressive



Thanks for the Linky Linky

MORE Toys i need ta BUY

__________________
--Stav--
Reply With Quote
  #28  
Old 07-07-2012, 10:38 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

I finally got around to acquiring a Chicago Electric Ultrasonic Cleaner. I purchased it at Harbor Freight Tools. It was on sale, and I stacked a 20% off coupon.

I didn't do any shooting today, so I didn't use it to clean any firearms parts. I did experiment with once fired brass. The brass definitely comes out better than it went in. The brass comes out clean, but not 100% shiny & polished.

At this point, I think it might be good to start to reload but I'm not 100% certain. I'm not a reloader. To get it nice and polished, I'd need to acquire a media tumbler.

I think the ultrasonic cleaner will make quick work of cleaning & degreasing any metal part I put in there. Until I ascertain the differences in cleaning solutions, no aluminum parts go in the cleaner.
__________________
-John
Reply With Quote
The Following User Likes This Post:
  #29  
Old 07-08-2012, 02:18 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Please keep us informed on how well it works!
__________________
Grover Oathkeeper
Reply With Quote
  #30  
Old 07-08-2012, 02:43 AM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

I just ordered the talon cleaning kit. It includes the Talon Scraper and the C.A.T. M4 in a little pouch and saves a little money....Finally found them, now I am responsible for the maintenance of 2 it will save me time. Thanks for the reference.
__________________
Grover Oathkeeper
Reply With Quote
  #31  
Old 07-08-2012, 06:38 AM
DustyJacket's Avatar
DustyJacket DustyJacket is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2009
Location: Missouri
Posts: 327
Likes: 4
Liked 83 Times in 51 Posts
Default

Pipe cleaners - gas tube and BCG key
q-tips - trigger group

And lately I've discovered compressed air to blow **** out of the trigger mechanism.
Reply With Quote
  #32  
Old 10-06-2012, 04:46 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

It's been a while. I forgot about this thread, then it pooped up as a "notable thread" and got referenced in a few others.

The Chicago Electric ultra sonic cleaner makes quick work of degreasing & cleaning the entire BCG. I strip & clean the BCG with my tools. I then put the parts into the Ultrasonic.

Wow. Grease & oil immediately dissolve off the part into the cleaning solution. The ultrasonic also gets into little areas my tools can't reach.

It works so well that I'm using the ultrasonic for deep cleaning disassembled firearms.
__________________
-John
Reply With Quote
The Following User Likes This Post:
  #33  
Old 10-06-2012, 05:43 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

yep it "pooped" up...LMAO...it is a great thread!!!
__________________
Grover Oathkeeper
Reply With Quote
The Following User Likes This Post:
  #34  
Old 10-06-2012, 06:01 PM
Foxtrot Foxtrot is offline
Banned
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Jan 2011
Posts: 438
Likes: 1
Liked 155 Times in 79 Posts
Default

JaPes,

You put together a nice list of cleaning tools, should help lots of people.

The carrier scraper tool end of the CAT 4 though, they stole my idea

I've been using my own "carrier scraper" tool for about 25 years, looks a lot like the carrier scraper tool end of the CAT 4. Machined it from a piece of steel myself many years ago. On the opposite end of my own DIY tool is a curved corner that fits the curve in the bolt that performs the same function as the bolt scraper tool end of the CAT 4. Guess i'll drill a hole in mine now for the firing pin

Last edited by Foxtrot; 10-06-2012 at 06:06 PM.
Reply With Quote
  #35  
Old 10-12-2012, 01:40 AM
N7BLW N7BLW is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: May 2003
Location: Granite Falls, WA
Posts: 78
Likes: 12
Liked 52 Times in 30 Posts
Default

Quote:
Originally Posted by JaPes View Post
It's been a while. I forgot about this thread, then it pooped up as a "notable thread" and got referenced in a few others.

The Chicago Electric ultra sonic cleaner makes quick work of degreasing & cleaning the entire BCG. I strip & clean the BCG with my tools. I then put the parts into the Ultrasonic.

Wow. Grease & oil immediately dissolve off the part into the cleaning solution. The ultrasonic also gets into little areas my tools can't reach.

It works so well that I'm using the ultrasonic for deep cleaning disassembled firearms.
What cleaning agent are you using in the ultrasonic tank?
__________________
Jim Sebring
Reply With Quote
  #36  
Old 10-12-2012, 12:20 PM
panhandle_gunslinger's Avatar
panhandle_gunslinger panhandle_gunslinger is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Oct 2011
Location: The Wild Texas Panhandle
Posts: 37
Likes: 9
Liked 3 Times in 3 Posts
Default

Hello and thanks for the valuable information. You listed tools that I didn't know existed. Like the question from Jim Sebring above me, I'd also like to know what solvent you are using in the ultrasonic tank. Also, how much lube do you use on the BCG? Does it need to be really lubed up or just a little? What about gun grease instead of oil? Thanks again...
__________________
Put Some "BANG" On It...
Reply With Quote
The Following User Likes This Post:
  #37  
Old 10-12-2012, 03:41 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Quote:
Originally Posted by N7BLW View Post
What cleaning agent are you using in the ultrasonic tank?
Quote:
Originally Posted by panhandle_gunslinger View Post
Hello and thanks for the valuable information. You listed tools that I didn't know existed. Like the question from Jim Sebring above me, I'd also like to know what solvent you are using in the ultrasonic tank. Also, how much lube do you use on the BCG? Does it need to be really lubed up or just a little? What about gun grease instead of oil? Thanks again...
I've been experimenting with combinations of home made ultrasonic brews.
  • Hot water + simple green + dish washing soap.
  • Hot water + simple green + vinegar.
  • Hot water + vinegar + lemon juice.

If I'm using an acidic solution, I neutralize with a dunk in water/baking soda solution. So far, I like the first combo. Works on gun parts & spent cases.

As for lube, I've tried a bunch of different products. I've used light oils, heavier oil, synthetic motor oil, hi-temp bearing grease, copper/graphite grease.

IMO, use whatever lube you want. Just make sure that you lube the BCG real well. Also, pay attention to any witness marks on the charging handle & upper receiver. Lube where you see witness marks.

If I'm storing the rifle, I'll lightly coat the BCG, chamber, & bore with lube for protection. When I'm going to go to the range, I'll spritz the BCG with lube. I'll also swab out the chamber & pull a patch through the bore to remove any excess oil.

NOW FOR PURE OPINION.

There are three lubes that I think do the job.
  • Breakfree CLP
  • Ballistol
  • Mobil 1 Synthetic Motor Oil

Breakfree CLP & Ballistol are available in aerosol cans. If your AR starts running dry at the range, pull the BCG, squirt it down, reinstall. Good to go. I've used both. I've switched to Ballistol. I use it to clean & lube. It saves time. The more I use Ballistol in a bore, the easier it becomes to clean the bore.

Mobil 1 is always good because you can buy a quart for less than the price of a few ounces firearms branded oil.
__________________
-John

Last edited by JaPes; 10-12-2012 at 03:49 PM.
Reply With Quote
The Following 3 Users Like Post:
  #38  
Old 10-13-2012, 12:51 AM
tinkerunique tinkerunique is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Apr 2012
Location: Kingsport, TN
Posts: 38
Likes: 79
Liked 4 Times in 3 Posts
Default

JaPes - PRIME THREAD !! Just made a couple additions to MY shopping list. Don't have a 'black rifle', yet. Reloading is the cheapest way to shoot-a-lot. I've been reloading for an old Hand Ejector for years and have found a couple "pet loads". Load #1 is for target shooting, load #2 is for hunting and 'home defense'. "Back-up" comes in size 9.
Reply With Quote
  #39  
Old 10-13-2012, 03:50 PM
beocon beocon is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Oct 2011
Posts: 8
Likes: 4
Liked 10 Times in 5 Posts
Default

Excellent thread. I saw a couple things to add to the cleaning kit, too. Something that I have found useful for detail cleaning in general is wooden chop sticks and BBQ skewers, whittled to different point shapes for cleaning different areas, with or without cloth patches. Cheap, disposable and don't scratch anything.
Reply With Quote
The Following User Likes This Post:
  #40  
Old 02-24-2013, 10:50 AM
spclayne spclayne is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Feb 2013
Location: Enterprise AL
Posts: 90
Likes: 29
Liked 41 Times in 21 Posts
Default

So, anyone have any recommendations for the bore snake and how to clean it? Ive had mine for a couple years? Dishwasher, laundry, by hand??
Reply With Quote
  #41  
Old 02-24-2013, 11:38 AM
eschoendorff eschoendorff is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Jan 2013
Posts: 100
Likes: 25
Liked 48 Times in 23 Posts
Default

Thanks John... some very good stuff in this thread.
Reply With Quote
  #42  
Old 02-24-2013, 03:52 PM
eschoendorff eschoendorff is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Jan 2013
Posts: 100
Likes: 25
Liked 48 Times in 23 Posts
Default

Quote:
Originally Posted by JaPes View Post



I used to change hand guards by compressing the delta ring by hand. Changing hand guards by hand, by myself, was time consuming, frustrating, and frustrating. I broke down and bought a $10 hand guard tool.

I shot a video:

AR Delta Ring Compression Tool - YouTube
Okay John, this video was great - but it is also the reason I need a new keyboard. I absolutely lost it when you flipped the handguard off. Chicken soup everywhere man!
Reply With Quote
  #43  
Old 02-24-2013, 06:40 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default New to AR's? Here are some tools I use to clean.

Quote:
Originally Posted by spclayne View Post
So, anyone have any recommendations for the bore snake and how to clean it? Ive had mine for a couple years? Dishwasher, laundry, by hand??
Because the Boresnake is most likely contaminated by lead and other contaminants I don't want to spread around, I hand wash it. I wash it in a cheap bucket & in a utility sink.
__________________
-John
Reply With Quote
The Following User Likes This Post:
  #44  
Old 02-24-2013, 07:29 PM
rjbFL rjbFL is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Jan 2002
Location: FL, USA
Posts: 87
Likes: 3
Liked 10 Times in 10 Posts
Default

John and All

Thanks for the Great thread!!

Much good information!!
__________________
NRA
Reply With Quote
  #45  
Old 05-30-2013, 11:59 PM
thndrchiken's Avatar
thndrchiken thndrchiken is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Apr 2011
Location: People's Republic of NJ
Posts: 856
Likes: 8
Liked 88 Times in 66 Posts
Default

I've been using Frog Lube and cleaning the bcg is simply a matter of wiping it off after heating it up with the blow dryer or heat gun. Carbon just melts off.
Reply With Quote
  #46  
Old 09-29-2014, 09:37 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

Just a little update. I've been shooting rifles every weekend for the past couple months. Because the rifles are being shot more often, I'm not obsessing about thorough cleanings for longer term storage. I purchased a new Viper Boresnake that has longer brush surface.

So far wet the portion before the bristles with CLP & pull through three times...
  • M&P 15 Melonite Treated Barrel = Gets most of the fouling out. Good enough for weekly trips to the range.
  • CMV non-lined barrel = Gets most of the fouling out. Good enough for weekly trips to the range.
  • IWI Tavor Chrome Lined = Gets the bulk of the fouling out.

This is just me shining a light down the bore and doing a very subjective visual evaluation. The Boresnake doesn't remove all the fouling as the traditional four step cleaning:

1. Push dry patch down bore to dislodge loose fouling.
2. Push solvent wetted patch down bore, let solvent dwell.
3. Push solvent wetted brush down bore from breech to muzzle three times.
4. Push jag and patch down bore until patches come out clean.

The advantage to the Boresnake is that I don't have to take as many fouling shots for poa/poi to stabalize.

As far as the rest:

The chamber gets quickly brushed with a chamber brush.
The upper/lower or single unit receiver gets wiped out
The bolt or gas piston gets wetted down with Hoppes, leave it to dwell, then wiped off.

The standard BCG gets carbon fouling at the usual places. A wipe down doesn't get all the carbon off. What's left doesn't impede operation. Combustion fouling wipes right off the Fail Zero NiBx BCG. I'm running it dry.

I've burned through about 2K rounds over the three rifles. I'll do a complete clean of all three over Thanksgiving.
__________________
-John
Reply With Quote
  #47  
Old 09-29-2014, 09:59 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

On a side note, a buddy of mine finally pulled the gas piston from his 4 year old FN SCAR 16. I'm not sure how many rounds he shot, but imagine all the fouling that occurs in a DI AR-15's BCG and upper concentrated onto a piston.

Filled a small jar with Seafoam, dropped in the piston and let it sit. 1/2 hour, wipe off the loosened carbon. Drop it back in, repeat. Worked like a charm.
__________________
-John
Reply With Quote
  #48  
Old 04-24-2015, 12:49 PM
happy1's Avatar
happy1 happy1 is offline
US Veteran
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Mar 2015
Location: Surprise, AZ
Posts: 73
Likes: 30
Liked 19 Times in 16 Posts
Default

Quote:
Originally Posted by JaPes View Post
I finally got around to acquiring a Chicago Electric Ultrasonic Cleaner. I purchased it at Harbor Freight Tools. It was on sale, and I stacked a 20% off coupon.

I didn't do any shooting today, so I didn't use it to clean any firearms parts. I did experiment with once fired brass. The brass definitely comes out better than it went in. The brass comes out clean, but not 100% shiny & polished.

At this point, I think it might be good to start to reload but I'm not 100% certain. I'm not a reloader. To get it nice and polished, I'd need to acquire a media tumbler.

I think the ultrasonic cleaner will make quick work of cleaning & degreasing any metal part I put in there. Until I ascertain the differences in cleaning solutions, no aluminum parts go in the cleaner.
I just use strait vinegar non diluted in my Ultra Sonic cleaner that I get at Walmart they have a cleaning vinegar thats 6% instead of 5% little stronger same price white or apple same never mind cleans the same, let it run for about 45 minutes and the brass comes out looking like new but you'll need a tumbler too get it nice and shinny.

Paul
PS thanks for all the good advice
__________________
Was born American I'M AMERICAN
Reply With Quote
The Following User Likes This Post:
  #49  
Old 04-24-2015, 03:34 PM
TheMaineEvent TheMaineEvent is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Oct 2012
Location: Maine
Posts: 637
Likes: 497
Liked 439 Times in 233 Posts
Default

Quote:
Originally Posted by spclayne View Post
So, anyone have any recommendations for the bore snake and how to clean it? Ive had mine for a couple years? Dishwasher, laundry, by hand??
I usually either clean my by hand with some Dawn dish soap or I put it in a sock and throw it in the washing machine if I have need to also wash some rags that are dirty, but still have some life left in them.

EDIT: FYI- there are bore guides out there that can be used on multiple rifles that are less money. Might was well buy something that has multiple uses, right?

Last edited by TheMaineEvent; 04-24-2015 at 03:55 PM.
Reply With Quote
The Following User Likes This Post:
  #50  
Old 04-24-2015, 09:01 PM
JaPes's Avatar
JaPes JaPes is offline
Member
New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean. New to AR's?  Here are some tools I use to clean.  
Join Date: Aug 2011
Location: NW Suburbs, Illinois
Posts: 4,013
Likes: 3,272
Liked 3,961 Times in 1,871 Posts
Default

If anyone has new cleaning tools not in this thread, post them up!
__________________
-John
Reply With Quote
Reply

Tags
1911, brownells, ejector, fouling, m16, m41, model 16, model 41, model 42, polymer, ruger, solvent, tactical, top-break

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A warning to those that use "brake-clean" to clean your guns. Hearsedriver S&W-Smithing 53 08-07-2020 12:25 AM
New/used smithing tools - clean? Dave Baird S&W-Smithing 11 01-29-2017 09:05 PM
Closed--GoldBox, tools, interior etc for Pre-27 3 1/2 & 27-2 tools StatesRightist WANTED to Buy 12 08-30-2012 08:12 PM
Gun Cleaning: How Clean is Clean Enough? baxtersmith S&W Revolvers: 1961 to 1980 34 12-24-2010 11:06 PM
Burn Marks on the cylindar face - To clean or not to clean? SIGWolf S&W Revolvers: 1961 to 1980 33 10-22-2008 03:25 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:32 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)