|
|
01-20-2022, 12:07 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Pike County PA
Posts: 1,046
Likes: 1,759
Liked 2,027 Times in 645 Posts
|
|
Spare part kit suggestions
I’m researching the parts that would compromise a realistic spare part kit for an AR-15. So many small parts, easily lost and a few will break. I don’t want to depend on items being available in the future to keep my rifle working.
Give me a description of your kits and suggest available ready made parts kits from vendors. Thanks in advance!
|
01-21-2022, 10:17 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
I would check with Brownells, Midway USA, and Sportsman's Guide. I know the last two sell them for sure. I can't see why Brownell's wouldn't have them as well.
|
The Following User Likes This Post:
|
|
01-21-2022, 10:45 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,640
Likes: 338
Liked 3,290 Times in 1,361 Posts
|
|
I have never had a part fail.
But it would be a good Idea to have a couple of extra extractor springs in case you disassemble the bolt farther than you should for cleaning and lose the spring.
|
The Following User Likes This Post:
|
|
01-21-2022, 11:17 PM
|
Member
|
|
|
Join Date: Oct 2020
Location: Tennessee
Posts: 130
Likes: 182
Liked 209 Times in 52 Posts
|
|
A parts kit for the bolt would be a good bet. Or just a spare bolt. I had trouble with the cotter pin that retains the firing pin being very hard to get in. I tried persuading it with a very small brass ended jewelers mallet and it broke. Just so happened to make it to the gun show were I bought some parts and the guy gave me one free of charge.
|
The Following User Likes This Post:
|
|
01-21-2022, 11:28 PM
|
|
Member
|
|
|
Join Date: Jun 2017
Location: OH
Posts: 2,114
Likes: 6,234
Liked 6,340 Times in 1,647 Posts
|
|
The most common parts I have seen fail or just plain wear out are the bolt parts. You can put your own spare parts together or companies like Rock River Arms have bolt rebuild kits already assembled.
Upper Receiver Parts (Part#AR3258)
In addition as Model 5 already mentioned, keep several of the firing pin retaining pins, they are easily lost during cleaning and once the legs start to spread apart they become difficult to reinsert. They are cheap.
Depending on the trigger that your rifle has, you may want to have spare, hammer, trigger and disconnector springs. There is not much else that you need. Most everything else would involve a major failure. I am working on putting together an entire complete bolt & bolt carrier for each of my AR's (13) that include several different calibers.
Last edited by mckenney99; 01-21-2022 at 11:33 PM.
|
The Following User Likes This Post:
|
|
01-26-2022, 10:35 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Pike County PA
Posts: 1,046
Likes: 1,759
Liked 2,027 Times in 645 Posts
|
|
Thanks all. Found everything at Brownells. Think I’ll go for a bolt carrier group and a set of springs to start.
|
The Following User Likes This Post:
|
|
01-27-2022, 01:10 PM
|
|
US Veteran
|
|
|
Join Date: Apr 2001
Location: Bartlett, Tennessee
Posts: 7,619
Likes: 2,935
Liked 18,701 Times in 4,789 Posts
|
|
What is it about the AR-15 that owners suddenly feel they need to keep spare parts? Do you keep spare parts for your other rifles and handguns?
|
01-27-2022, 08:27 PM
|
US Veteran
|
|
|
Join Date: Jan 2016
Location: Tennessee
Posts: 641
Likes: 1,987
Liked 1,218 Times in 390 Posts
|
|
Quote:
Originally Posted by Grayfox
What is it about the AR-15 that owners suddenly feel they need to keep spare parts? Do you keep spare parts for your other rifles and handguns?
|
Springs and retainers have a habit of disappearing when cleaning& lubricating my AR's or flying off to hidden places.
I am waiting right now for 3 different sets I ordered 3 days ago from Midway
I have learned to back ups for my back ups. I also have all my original triggers from my other rifles in case the upgraded one craps out.
I learned from running a sport fishing boat from Fla. to Ny. that
there is no service station 30 miles off the east coast & it takes along time for the Coast Guard show up.
|
The Following User Likes This Post:
|
|
01-27-2022, 08:29 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2014
Location: Aliquippa, PA
Posts: 1,400
Likes: 351
Liked 714 Times in 476 Posts
|
|
Quote:
Originally Posted by Grayfox
What is it about the AR-15 that owners suddenly feel they need to keep spare parts? Do you keep spare parts for your other rifles and handguns?
|
Because they can be had easily and cheaply, are easy to change out without tools, are known wear and tear parts, and they don't take that much room or weight that much.
Unless you start talking about carrying an entire BCG with you of course.
|
The Following User Likes This Post:
|
|
01-27-2022, 08:50 PM
|
Member
|
|
|
Join Date: Feb 2016
Location: Huntsville AL
Posts: 2,125
Likes: 1,179
Liked 2,671 Times in 833 Posts
|
|
I have a oops kit with extra O rings ,springs and pins for my AR . Wolff spring kit for my 5906 so far all had to replace was mag release spring and extra RSA for my M&P pistol
|
01-27-2022, 08:56 PM
|
|
Member
|
|
|
Join Date: Oct 2014
Location: Central VA
Posts: 2,535
Likes: 3,774
Liked 4,332 Times in 1,548 Posts
|
|
Buy a second AR. If (big IF) something breaks you'll still be in business and you will then know what to buy. My version of a New York reload.
__________________
Foster Positivity.
|
The Following User Likes This Post:
|
|
01-27-2022, 08:59 PM
|
Member
|
|
|
Join Date: Dec 2009
Posts: 1,056
Likes: 2,760
Liked 1,377 Times in 576 Posts
|
|
Quote:
Originally Posted by Grayfox
What is it about the AR-15 that owners suddenly feel they need to keep spare parts? Do you keep spare parts for your other rifles and handguns?
|
I do keep spare parts kits for the guns I shoot a lot. Remember that access to a gunsmith in the future is not guaranteed.
|
The Following User Likes This Post:
|
|
01-27-2022, 10:16 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Pike County PA
Posts: 1,046
Likes: 1,759
Liked 2,027 Times in 645 Posts
|
|
Quote:
Originally Posted by Grayfox
What is it about the AR-15 that owners suddenly feel they need to keep spare parts? Do you keep spare parts for your other rifles and handguns?
|
Actually I do have spares for my other military type rifles and spare springs for all my handguns. A couple of Wolfe spring kits covers all my Smiths. Not to mention magazines. As I posted, I don’t want to take the chance that these parts and magazines will always be easily available.
|
The Following User Likes This Post:
|
|
01-27-2022, 10:47 PM
|
|
US Veteran
|
|
|
Join Date: Jun 2013
Location: Georgetown, Tx
Posts: 2,350
Likes: 2,564
Liked 2,881 Times in 1,189 Posts
|
|
Spare bolt, mag release, bolt release, charging handle. Selector switch detent and spring. Bolt cam pin, Spare trigger and hammer springs. Buffer tube springs. Heck just about everything except the upper and lower receivers, lol.
Last edited by Bozz10mm; 01-30-2022 at 09:57 AM.
|
The Following 2 Users Like Post:
|
|
01-30-2022, 02:46 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Pike County PA
Posts: 1,046
Likes: 1,759
Liked 2,027 Times in 645 Posts
|
|
I just found an excellent video on Brownells website on the subject. Well worth a watch.
|
02-05-2022, 12:23 AM
|
|
Member
|
|
|
Join Date: Jan 2021
Posts: 243
Likes: 364
Liked 152 Times in 95 Posts
|
|
Quote:
Originally Posted by Model5
A parts kit for the bolt would be a good bet. Or just a spare bolt. I had trouble with the cotter pin that retains the firing pin being very hard to get in. I tried persuading it with a very small brass ended jewelers mallet and it broke. Just so happened to make it to the gun show were I bought some parts and the guy gave me one free of charge.
|
That had to be an Aero BCG
I had the same trouble with the firing pin retention pin and I saw some other guys who did too. I got another one for I think 50 cents and it's fine.
|
02-05-2022, 11:54 AM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 6,658
Likes: 1,825
Liked 5,415 Times in 2,732 Posts
|
|
Quote:
Originally Posted by K Frame Keith
Thanks all. Found everything at Brownells. Think I’ll go for a bolt carrier group and a set of springs to start.
|
I always find it touching-and troubling-that so many people think the bolt and/or BCG is plug and play. While the replacement probably will pass a FIELD gauge (point at which the rifle is no longer safe to operate), it's unknown if your new parts would pass either the GO or NO-GO gauge. The second gauge tells you that even after the bolt wears in that headspace will remain acceptable. FWIW, the bolt carrier is pretty much a life of the rifle part.
Moving on, I'd suggest at least one set of spare gas rings, instead of the firing pin retaining cotter pin, the solid retaining pin of the original design is available. I'd also suggest that one of the little fixtures that allows you to capture the ejector while taking the bolt apart is money well spent. A spare cam pin isn't a bad idea either. Don't forget the little black plug that goes in the extractor spring. BTW, if you have a choice, the M4 extractor spring is heavier-although by now it may have completely replaced the rifle spring.
Last edited by WR Moore; 02-05-2022 at 11:58 AM.
|
02-05-2022, 12:49 PM
|
|
Member
|
|
|
Join Date: Feb 2010
Location: Pike County PA
Posts: 1,046
Likes: 1,759
Liked 2,027 Times in 645 Posts
|
|
Funny, I always find it touching and troubling when some rando decides to be condescending in my general direction. I was a Police armorer for 25 years. When I use a part, it will fit.
|
|
Posting Rules
|
|
|
|
|