|
 |
|

01-27-2010, 11:40 PM
|
 |
Member
|
|
|
Join Date: Aug 2009
Posts: 75
Likes: 0
Liked 4 Times in 3 Posts
|
|
Sigma FAQ
Ok, ladies and gentlemen, this is an attempt to answer and inform everyone of the different questions being asked about the S&W Sigma. I will try to give as much info as possible and cover as much ground as I can.
First off, a little bit of background info.
The Sigma series pistols were created in 1994 and are S&W's successful attempt at producing polymer framed pistols. These pistols are DAO and only available as such. They came chambered in 40S&W, 9MM, and a sub-compact .380 version. There also was a limited number produced that were chambered in .357 SIG. The Sigma series pistols were so similar to the Glock pistols that Glock sued S&W for patent infringement. The case was settled out of court in 1997 with S&W agreeing to make alterations to the Sigma design and pay an undisclosed amount to Glock. In 1999 S&W improved the Sigma by shortening the barrel and slide by .5 inches, made the grip more comfortable and ergonomic, slightly enlarged the ejection port, and added an accessory rail which requires an adapter to mount anything.
Ok on to some questions I have been seeing asked a lot.
#1 Trigger job - This is extremely easy to do, All it requires is a few tools (Hole punch, paper clip) and can be done in a
matter of minutes unless you want to polish the internals. I'd recommend polishing if you have a gritty trigger. Here is a
video that covers the whole process. Link. The video was made by a fellow member here so if he chimes in be sure to thank him for a well explained and informed trigger job.
#2 +P+ ammo - There are mixed reviews on weather or not this "Hot" ammo should be used. I believe it is stated in the owners manual that firing this type of ammo will cause excessive wear and is not recommended by S&W.
#3 Dry firing - Feel Free to dry fire the heck out of it. Obviously if it "Requires" you to dry fire it to field strip it then its not going to hurt anything. I don't recommend this for any other gun though, and if you're really worried about dry firing the sigma then just buy some snap caps. I also hear that dry firing can possibly smooth out the trigger, but i'll let you be the judge of that.
#3 Accessories - There is lots of stuff you can buy for this gun, just look around. Google, Amazon, eBay, etc. If you're
looking for a well made laser then I recommend "The Machinists Crib" on eBay.
#4 Purchase advice - Q: Should I buy a sigma? A: YES!!! If you can handle a D/A trigger (which can be smoothed out and lightened) then this, in my opinion, is one of the best handguns you can buy for the money.
#5 The Plastic piece in the handle - This is actually a secret button that, when pressed, turns your gun into a bullet proof
sports car armed with machine gun turrets.....Just kidding, Its actually just a "space taker upper" so your mag fits in the
handle snugly.
#6 What's the difference in the Allied Forces version? - The slide is black. That's it. Oh, and the price tag. Here is a Link to a video of someone duracoating their non-AF version. Seems like it would work well enough.
#7 What does VE stand for? Someone correct me if im wrong on this but I think it stands for Value Enhanced. Also the F model was the first gen and had the slightly longer barrel and slide.
#8 Are there different sights? Yes, MMC and PTnight sights have some for the sigma. Just do a search on google and something should come up. UPDATE: I was just sent this link from a fellow forum member on here and will leave it up to you to make your own decision on weather or not you still want to do business with them. I won't be.
If there are any other questions please feel free to ask, and if there is anything I missed let me know and I will add it in.
__________________
665: Neighbor of the Beast
Last edited by Joker84; 02-27-2010 at 11:29 PM.
|
The Following User Likes This Post:
|
|

01-28-2010, 12:19 AM
|
 |
US Veteran
|
|
|
Join Date: Jun 2008
Location: NJ
Posts: 1,210
Likes: 314
Liked 75 Times in 33 Posts
|
|
Seems like you hit the high notes.
I think you only missed - what holster fits, (take your choice paddle, IWB, etc).
And what after market sights are avialable, (non laser).
For myself, I liked the TDR911 laser better than the one you mentioned, but that's one of those pay your money take your choice kind of things.
__________________
Pete.
|

01-28-2010, 01:14 AM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 53
Likes: 0
Liked 2 Times in 2 Posts
|
|
Nice work.
Maybe add an explanation of the code. You know. What does SW9VE stand for? And cover all the variables.
Thanks!
|

01-28-2010, 01:21 AM
|
 |
Member
|
|
|
Join Date: Oct 2009
Location: Vermont
Posts: 237
Likes: 0
Liked 11 Times in 5 Posts
|
|
And not everything needs an adapter to fit the rail. The insight M4 fits natively.
|

01-28-2010, 09:26 AM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
|
i was looking atthis gun pretty seriously but the local shop near me kept pushing me towards a Detriot issued Glock 22 or an M&P. Obviously a big price difference. The Sigma feels much betetr in the hand that's for sure. Any thoughts?
|

01-28-2010, 09:35 AM
|
 |
Member
|
|
|
Join Date: Jan 2010
Location: Killeen Tx
Posts: 23
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by N901
i was looking atthis gun pretty seriously but the local shop near me kept pushing me towards a Detriot issued Glock 22 or an M&P. Obviously a big price difference. The Sigma feels much betetr in the hand that's for sure. Any thoughts?
|
If you want a pistol that goes bang everytime you pull the trigger and puts a hole in whatever you are aiming at then by all means purchase a sigma. Anyone of the faults that the glock guys go on and on about can be corrected quickly while still keeping the warranty intact.
|

01-28-2010, 09:53 AM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
|
Thanks for the input!! Living in MA I probably shouldnt mess with the trigger to much I would think. Crazy laws up here. This is great though, and appreciated. The Sigma just feels better in my hand than the others.
|

01-28-2010, 12:16 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Wisconsin
Posts: 715
Likes: 1,140
Liked 765 Times in 270 Posts
|
|
Joker84....Great job...thanks for taking the time to put together this informative thread. I agree that it's a great buy. I'm really happy with my SW40VE.
spricks
|

01-28-2010, 03:45 PM
|
Member
|
|
|
Join Date: Dec 2009
Location: Los Angeles
Posts: 57
Likes: 0
Liked 0 Times in 0 Posts
|
|
This is a good idea, Joker. You might want to include a section on the Glock lawsuit as well. And as suggested by another poster in another thread, what is the "Stigma with the Sigma" (internet hearsay, etc)?
|

01-28-2010, 10:46 PM
|
 |
US Veteran
|
|
|
Join Date: Jun 2008
Location: NJ
Posts: 1,210
Likes: 314
Liked 75 Times in 33 Posts
|
|
Quote:
Originally Posted by N901
Thanks for the input!! Living in MA I probably shouldnt mess with the trigger to much I would think. Crazy laws up here. This is great though, and appreciated. The Sigma just feels better in my hand than the others.
|
Welcome to the forum. I was shopping for something else when I picked up my .40VE. The thing just felt right in my hand. Needless to say, it went home with me.
Will it be my last gun - no, was it my first gun - no. But it's a whole lot of fun and a good gun.
I got mine with a $50 and 2 mag rebate. Hard to beat for sure.
The older ones had problems apparantly, but I've got nothing bad to say about mine. Sure it's a lot longer, harder trigger pull than my 1911's etc, but so what. It does what it's supposed to.
__________________
Pete.
Last edited by PDL; 01-28-2010 at 10:47 PM.
Reason: still can't spell
|

01-29-2010, 09:05 AM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
|
Thanks! Im going to call the S&W corporate store today and see how much they are selling them for there. If cheaper than my local store I'll take the short ride. Thanks for the input.
|

01-30-2010, 03:03 PM
|
 |
Member
|
|
|
Join Date: Feb 2008
Location: PA
Posts: 332
Likes: 13
Liked 9 Times in 7 Posts
|
|
Quote:
Originally Posted by Joker84
Ok, ladies and gentlemen, this is an attempt to answer and inform everyone of the different questions being asked about the S&W Sigma. I will try to give as much info as possible and cover as much ground as I can.
First off, a little bit of background info.
The Sigma series pistols were created in 1994 and are S&W's successful attempt at producing polymer framed pistols. These pistols are DAO and only available as such. They came chambered in 40S&W, 9MM, and a sub-compact .380 version. There also was a limited number produced that were chambered in .357 SIG. The Sigma series pistols were so similar to the Glock pistols that Glock sued S&W for patent infringement. The case was settled out of court in 1997 with S&W agreeing to make alterations to the Sigma design and pay an undisclosed amount to Glock. In 1999 S&W improved the Sigma by shortening the barrel and slide by .5 inches, made the grip more comfortable and ergonomic, slightly enlarged the ejection port, and added an accessory rail which requires an adapter to mount anything.
Ok on to some questions I have been seeing asked a lot.
#1 Trigger job - This is extremely easy to do, All it requires is a few tools (Hole punch, paper clip) and can be done in a
matter of minutes unless you want to polish the internals. I'd recommend polishing if you have a gritty trigger. Here is a
video that covers the whole process. Link. The video was made by a fellow member here so if he chimes in be sure to thank him for a well explained and informed trigger job.
#2 +P+ ammo - There are mixed reviews on weather or not this "Hot" ammo should be used. I believe it is stated in the owners manual that firing this type of ammo will cause excessive wear and is not recommended by S&W.
#3 Dry firing - Feel Free to dry fire the heck out of it. Obviously if it "Requires" you to dry fire it to field strip it then its not going to hurt anything. I don't recommend this for any other gun though, and if you're really worried about dry firing the sigma then just buy some snap caps. I also hear that dry firing can possibly smooth out the trigger, but i'll let you be the judge of that.
#3 Accessories - There is lots of stuff you can buy for this gun, just look around. Google, Amazon, eBay, etc. If you're
looking for a well made laser then I recommend "The Machinists Crib" on eBay.
#4 Purchase advice - Q: Should I buy a sigma? A: YES!!! If you can handle a D/A trigger (which can be smoothed out and lightened) then this, in my opinion, is one of the best handguns you can buy for the money.
#5 The Plastic piece in the handle - This is actually a secret button that, when pressed, turns your gun into a bullet proof
sports car armed with machine gun turrets.....Just kidding, Its actually just a "space taker upper" so your mag fits in the
handle snugly.
#6 What's the difference in the Allied Forces version? - The slide is black. That's it. Oh, and the price tag. Here is a Link to a video of someone duracoating their non-AF version. Seems like it would work well enough.
#7 What does VE stand for? Someone correct me if im wrong on this but I think it stands for Value Enhanced. Also the F model was the first gen and had the slightly longer barrel and slide.
#8 Are there different sights? Yes, MMC and PTnight sights have some for the sigma. Just do a search on google and something should come up.
If there are any other questions please feel free to ask, and if there is anything I missed let me know and I will add it in.
|
Lifetime warranty new or used.
|
The Following User Likes This Post:
|
|

01-30-2010, 11:34 PM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 230
Likes: 99
Liked 25 Times in 18 Posts
|
|
I liked it the minute i saw it and felt the grip.I have no complaints with mine.Thanks for the information.
|

01-31-2010, 01:16 AM
|
Banned
|
|
|
Join Date: Oct 2009
Location: Oklahoma
Posts: 482
Likes: 0
Liked 51 Times in 8 Posts
|
|
Good work done here.
As for my trigger work. Please take it for what it is. Hobbyist work and input! And yes it still fires great!!!!!!
|

02-01-2010, 08:24 AM
|
Member
|
|
|
Join Date: May 2006
Location: Punta Gorda Florida
Posts: 195
Likes: 0
Liked 6 Times in 6 Posts
|
|
Good post. This should be a great help for new Sigma owners.
__________________
TDR911 Sigma Laser Systems
|

02-03-2010, 06:15 PM
|
 |
US Veteran
|
|
|
Join Date: Jun 2009
Location: Central Fl.
Posts: 372
Likes: 3
Liked 12 Times in 8 Posts
|
|
I'm glad to see this was made a "sticky". S&W has sold a tremendous quantity of Sigma's. Enough that Crimson Trace is taking a chance and making a Sigma specific laser for them. Imagine a company willing to bet $300. gun owners will part with $200. for a laser. I have two 9VE's and would buy a 45VE in a New York second if they made one.
__________________
US Army 1965-1971
|

02-09-2010, 02:00 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: New Jersey
Posts: 12
Likes: 0
Liked 0 Times in 0 Posts
|
|
I am new to the forum and was just about to post a new thread when i saw this one so it was good timing. i own a few S&W revolvers and was looking to purchase my first 9mm semi-auto. I've looked at a lot and found that i like the feel of the sigma sm9ve and the glock 19. I tried the M&P but it just didn't seem to fit my hand well.....just felt to wide.
Sigma reviews are all the map (good vs. bad) and the fact that they are lower cost causes folks to think that maybe the quality is not comparable.
I wouldn't mind adding another S&W to my collection but can someone speak to the lower cost.....the 19 and sigma seem comparable but am i missing something on features, reliability, quality of parts used to manufacture the product, etc.
Any feedback is appreciated.
thanks
Dennis
|

02-09-2010, 08:43 PM
|
 |
US Veteran
|
|
|
Join Date: Feb 2010
Location: Michigan
Posts: 552
Likes: 1
Liked 6 Times in 6 Posts
|
|
Good Topic!
Thanks for the info. It covered a lot!
|

02-09-2010, 09:32 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Grosse Pointe, MI
Posts: 9
Likes: 0
Liked 1 Time in 1 Post
|
|
SW40VE
Quote:
Originally Posted by dennisp
I am new to the forum and was just about to post a new thread when i saw this one so it was good timing. i own a few S&W revolvers and was looking to purchase my first 9mm semi-auto. I've looked at a lot and found that i like the feel of the sigma sm9ve and the glock 19. I tried the M&P but it just didn't seem to fit my hand well.....just felt to wide.
Sigma reviews are all the map (good vs. bad) and the fact that they are lower cost causes folks to think that maybe the quality is not comparable.
I wouldn't mind adding another S&W to my collection but can someone speak to the lower cost.....the 19 and sigma seem comparable but am i missing something on features, reliability, quality of parts used to manufacture the product, etc.
Any feedback is appreciated.
thanks
Dennis
|
I just bought the SW40VE last week and I'm extremely pleased. I opted for the .40 over the 9mm for a little more stopping power. The Sigma feels like it was made for my hand, has a lifetime warranty and most importantly goes "bang" every time I pull the trigger. The trigger feel is very subjective of course. Mine is very smooth, but a little on the heavy side. I don't find this to be an issue.
|

02-11-2010, 10:19 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Minnesota
Posts: 844
Likes: 153
Liked 159 Times in 57 Posts
|
|
I was at my local dealer's again today and he had SW9VEs for $303 with (2) mags. He allowed $260 on my used LCP so it would have been about $46 after taxes plus I'd get the rebate or the (2) extra magazines (at least he still had the coupons out). I chose something else but man I was really kicking that one around.
Is that a fairly good price on these?
|

02-12-2010, 09:07 AM
|
Member
|
|
|
Join Date: Nov 2008
Location: Louisville, KY
Posts: 183
Likes: 0
Liked 1 Time in 1 Post
|
|
Yes, $303 is a good price! Currently, about $299 is the lowest price I have seen anywhere.
|

02-13-2010, 10:02 PM
|
Member
|
|
|
Join Date: Oct 2009
Posts: 5
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by dennisp
Sigma reviews are all the map (good vs. bad) and the fact that they are lower cost causes folks to think that maybe the quality is not comparable.
|
The bad reviews I've read seemed to be mostly for early models.
|

02-14-2010, 07:22 PM
|
 |
Member
|
|
|
Join Date: Dec 2009
Location: lake worth florida
Posts: 84
Likes: 0
Liked 14 Times in 3 Posts
|
|
I just traded my nib taurus pt111 mil pro 9mm for a SW9VE
today at our fla. gun show.Awesome transaction! Can't wait to
shoot my nib smith,grip feels great and fits nicely in my Don Hume 715 holster.Money saved on leather
|

02-16-2010, 05:58 PM
|
 |
Member
|
|
|
Join Date: Aug 2009
Location: Michigan
Posts: 13
Likes: 2
Liked 3 Times in 3 Posts
|
|
Great Gun.
I've had my 40VE for 6 years and have put over 2000 rounds through it with not one failure to fire. It points dead-on and the trigger will smooth out in time without monkeying with the springs. I have nothing but good things to say about this gun. It is the unsung hero, the black sheep, the red-headed step-child of the S&W line, but it does it's job and it does it very well.
|

02-17-2010, 01:44 AM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 103
Likes: 2
Liked 7 Times in 6 Posts
|
|
My son in law got a 40VE I tried but they were out said they would have more the next week. Well they did but, all they got in was the 9VE'S but, I'm like my grand kids and couldn't wait any longer.  But I'm happy with the 9mm.
|

02-17-2010, 03:44 AM
|
 |
Member
|
|
|
Join Date: Dec 2008
Location: Michigan
Posts: 1,119
Likes: 18
Liked 131 Times in 70 Posts
|
|
Quote:
Originally Posted by Brickster6
I've had my 40VE for 6 years and have put over 2000 rounds through it with not one failure to fire. It points dead-on and the trigger will smooth out in time without monkeying with the springs. I have nothing but good things to say about this gun. It is the unsung hero, the black sheep, the red-headed step-child of the S&W line, but it does it's job and it does it very well.
|
What holster do you use with your Sigma and your light?
__________________
Don't look, reload and shoot!
|

02-17-2010, 04:24 PM
|
 |
Member
|
|
|
Join Date: Aug 2009
Location: Michigan
Posts: 13
Likes: 2
Liked 3 Times in 3 Posts
|
|
Sigma Holsters
Quote:
Originally Posted by Marcus88
What holster do you use with your Sigma and your light?
|
I've never been able to find a holster for my Sigma and the Streamlight M4 Tactical Illuminator  It's snapped on when it's in my nightstand. Fumbling around for my pistol and my Maglight is asking too much of me at 4 a.m.
In the winter with an overcoat I use a Blackhawk Serpa CQC paddle and when wearing anything lighter a Don Hume IWB Model H715.
You might be able to get away with a very large generic nylon holster, but I'd imagine it would be too large for concealed carry.
|

02-18-2010, 06:04 AM
|
 |
Member
|
|
|
Join Date: Dec 2008
Location: Michigan
Posts: 1,119
Likes: 18
Liked 131 Times in 70 Posts
|
|
I tried a generic nylon holster and didn't care for it too much. I guess I will never get to carry a light on my gun :sigh:
__________________
Don't look, reload and shoot!
|

02-18-2010, 09:17 AM
|
 |
US Veteran
|
|
|
Join Date: Jun 2009
Location: Central Fl.
Posts: 372
Likes: 3
Liked 12 Times in 8 Posts
|
|
Quote:
Originally Posted by Marcus88
I tried a generic nylon holster and didn't care for it too much. I guess I will never get to carry a light on my gun :sigh:
|
Marcus, why don't you try your hand at making a kydex holster? It ain't rocket science. Kydex on e bay, about $5. A rivet, chicago screw or a simple nut and bolt and your in business. Kydex is very easy to work with. Toaster oven about 300 or even a hair dryer will do it. Just heat and mold it to fit. It's very forgiving. I use .80 for 1 piece holsters and it's heavy enough for a strong clip. Lots of stuff on YouTube or forums like this.
__________________
US Army 1965-1971
|

02-21-2010, 10:04 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: AZ, Paradise valley
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
I just bought a sigma sw9f from my dad which he had bought and put in a box since the 90's, so it is brand new . i was wondering if anyone has any of these firearms and if they are the same as the new sw9ve, or is there any glitches because they were the first generation of polymer pistols made by S&W. Usually first generations of anything has glitches or problems. Took it to the range a couple days ago and i feed 150 rounds of ball ammo with one failure to eject( maybe it was the one box of PMC ammo that the range sold me, cause it shot Remington and Magtech just fine). Also, does anyone know if i can find a 17 round magazine anywhere. i can only find 16 round ones for the sw9ve, and even then they are kind of pricey $45.00. Well, hope to get some replies. THX
|

02-23-2010, 09:05 PM
|
Member
|
|
|
Join Date: Apr 2007
Location: Raleigh, N. Carolina USA
Posts: 90
Likes: 0
Liked 2 Times in 2 Posts
|
|
Holster
I bought a Hume JIT Slide for a G19 to fit my SW40VE. I had to stretch it a little. It fits now just a little too snug which assures it won't just fall out.
This is a very compact holster. It holds the gun very closely to your body.
All the Best,
D. White
|

02-23-2010, 09:26 PM
|
 |
US Veteran
|
|
|
Join Date: Sep 2009
Location: Massachusetts
Posts: 821
Likes: 5
Liked 338 Times in 114 Posts
|
|
I bought a SW9VE locally, I was looking for a 9mm and the price was right, it seemed cheap, with the slide release being cheaper than the 1911 slide release (not fair to compare) and it had the $50 rebate, which I haven't gotten yet.
Yes the trigger is harder then my 1971 M-18, in fact after putting 50 rounds through the 9 the other day at the range when I picked up the M18 it felt like a hair trigger.
But since using the SW9VE I have fallen in love with it!
I was breaking clay pigeons I put on the range backstop 50 YARDS away, although for the life of me I couldn't hit a baseball I also put at 50 yards, but that is not bad for a short barreled 9mm!
I was thinking of a M&P 9mm but now wonder if another 9VE would be just as good?
Thoughts
|

02-26-2010, 03:15 AM
|
 |
Member
|
|
|
Join Date: May 2006
Location: U.P. Mi
Posts: 2,056
Likes: 8,925
Liked 1,265 Times in 691 Posts
|
|
poch Gun broker # 158786216 2 NIB SS 17 rd for 68$ also CDNN 16 rd new SS 28.18$ 800-588-9500 As for the guns themselves I have 40F's and 40C's with night sights the early ones. I have"heard" about problems but the 2 F's and 2 C's have more than 5K through each- I had to replace a striker spring on the one F- 2.50$ and 15 min. I shoot them better than glocks, sights are still bright, and they are more accurate than they have any right to be. I have sold many and have many personal ones. I even had Blackhills leather make a dual gun shoulder holster, and attached DBL mag pouch- Excellent. Enjoy!!!!
__________________
I BACK OUR BLUE
|

02-27-2010, 11:31 PM
|
 |
Member
|
|
|
Join Date: Aug 2009
Posts: 75
Likes: 0
Liked 4 Times in 3 Posts
|
|
Ladies and Gents I added an update to the night sights part of the faqs. Please take a look and give us your views on the company. I cannot speak for them as I have never done business with them.
__________________
665: Neighbor of the Beast
|

02-28-2010, 01:53 AM
|
 |
Member
|
|
|
Join Date: Oct 2009
Location: Vermont
Posts: 237
Likes: 0
Liked 11 Times in 5 Posts
|
|
Quote:
Originally Posted by Joker84
Ladies and Gents I added an update to the night sights part of the faqs. Please take a look and give us your views on the company. I cannot speak for them as I have never done business with them.
|
MMC used to be a great company with great sights but they seem to have gone out of business in the last six months or so which seems to be why people are reporting bad customer service...
|

02-28-2010, 03:13 PM
|
Member
|
|
|
Join Date: Oct 2008
Posts: 106
Likes: 0
Liked 7 Times in 3 Posts
|
|
Quote:
Originally Posted by Walthernut
Lifetime warranty new or used.
|
lifetime warranty? from page 27 of the manual that came with my Sigma ....
Limited Warranty
"Smith & Wessons firearms are warranted to be free from defects in material and workmanship. Any such defects of which Smith & Wesson receives written notice within one year from the date of purchase by the original owner , will be remedied by Smith & Wesson without charge within a reasonable time after such notification and delivery of the firearm is provided below." (Delivery instructions are listed after this paragraph)
|

02-28-2010, 07:16 PM
|
 |
US Veteran
|
|
|
Join Date: Sep 2009
Location: Massachusetts
Posts: 821
Likes: 5
Liked 338 Times in 114 Posts
|
|
Just got back from the range with my new Sigma and new M&P9C
The 9c has a light trigger but it was scattering shots, the felt recoil was about the same.
I am not a great shot but I have fun.
The top target is the Sigma the bottom the M&P9c
|

02-28-2010, 07:26 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Wisconsin
Posts: 715
Likes: 1,140
Liked 765 Times in 270 Posts
|
|
Quote:
Originally Posted by Prime Winner
lifetime warranty? from page 27 of the manual that came with my Sigma ....
Limited Warranty
"Smith & Wessons firearms are warranted to be free from defects in material and workmanship. Any such defects of which Smith & Wesson receives written notice within one year from the date of purchase by the original owner , will be remedied by Smith & Wesson without charge within a reasonable time after such notification and delivery of the firearm is provided below." (Delivery instructions are listed after this paragraph)
|
Prime Winner...this point might be worth a new thread? I was told by Gander Mt when I purchased my Sigma that it has a S&W lifetime warranty as well as a one year warranty and a free cleaning by Gander MT.
I thought you were wrong....page 27 is page 27, eh!
Was suprised you were right.
spricks
|

02-28-2010, 07:40 PM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 103
Likes: 2
Liked 7 Times in 6 Posts
|
|
So then the lifetime warranty only, applies to the original purchaser when new?  if so, I hope I can find a new striker if mine ever breaks. From what I saw for parts list order, the striker assemblies have to be installed by smith & Wesson.
Last edited by p5200; 02-28-2010 at 07:44 PM.
|

02-28-2010, 09:53 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Wisconsin
Posts: 715
Likes: 1,140
Liked 765 Times in 270 Posts
|
|
Nope....there is no lifetime warranty....not even for the original owner.
That was my point!
spricks
|

02-28-2010, 10:00 PM
|
Member
|
|
|
Join Date: Oct 2008
Posts: 106
Likes: 0
Liked 7 Times in 3 Posts
|
|
just my luck, I bought a Sigma yesterday largely due to what I thought was a lifetime warranty.
EDIT: Im really confused now. I found this on the S&W site ......
Warranty Information
The Smith & Wesson Advantage™
In addition to providing some of the highest quality products available today, Smith & Wesson is committed to providing our customers with support and services second to none. When you purchase a Smith & Wesson handgun, you receive the Smith & Wesson Advantage™, comprised of four service features:
1. Lifetime Service Policy
We will repair any defect in material or workmanship without charge to the original purchaser for as long as you own the handgun.
Last edited by Prime Winner; 02-28-2010 at 10:08 PM.
|

02-28-2010, 11:14 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: Donut Center, Colorado
Posts: 14
Likes: 0
Liked 1 Time in 1 Post
|
|
Straight from SW website:
Warranty Information - Smith & Wesson
I don't know exactly what this means; if you shoot it a lot, and things wear out, is this a defect in materials or workmanship? I guess it depends on whether you or SW is the one to define the term.
The book I got with my SW40VE last week also says 1 year.
|

03-03-2010, 07:40 AM
|
 |
Member
|
|
|
Join Date: Nov 2007
Location: The Alamo!
Posts: 1,172
Likes: 578
Liked 378 Times in 174 Posts
|
|
What do you use to clean the polymer?
Anybody use something to shine it up on the outside? grip, frame trigger guard, etc...?
Lee
|

03-03-2010, 10:47 PM
|
Member
|
|
|
Join Date: Mar 2010
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
Sigma 9
I like the feel of this pistol -
100 rounds to break in had 1 jam per 30 -
Standard range ammo -
|

03-06-2010, 04:18 PM
|
 |
Member
|
|
|
Join Date: Feb 2010
Posts: 28
Likes: 0
Liked 0 Times in 0 Posts
|
|
Anyone have any idea how many Sigma's in .357 Sig. (Sigsigs?) were manufactured? Thanks in advance.
__________________
NRA Certified Instructor
|

03-06-2010, 05:13 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Wisconsin
Posts: 715
Likes: 1,140
Liked 765 Times in 270 Posts
|
|
I'm in the back of the classroom with My hand raised in excitement! The teacher calls on me.... Ok spricks how many.... none. That's correct you are the best. LOL!
Actually if you did'nt know they only are available in 9mm& 40S&W.
spricks
|

03-06-2010, 07:25 PM
|
 |
Member
|
|
|
Join Date: Dec 2009
Posts: 258
Likes: 0
Liked 7 Times in 5 Posts
|
|
.357sig SIGMA - YES
Quote:
Originally Posted by spricks
Ok spricks how many.... none. That's correct you are the best. LOL!
Actually if you did'nt know they only are available in 9mm& 40S&W.
spricks
|
ACTUALLY.... FYI spricks they did make .357 sigma for about 8 months.
No I dont know how many, but YES there really was a SW357V Sigma! around about 1998-99 IIRC
__________________
2nd Admen.-Right to bear AR 's
Last edited by 40cal; 03-06-2010 at 07:46 PM.
|

03-06-2010, 10:44 PM
|
 |
Member
|
|
|
Join Date: Aug 2009
Posts: 75
Likes: 0
Liked 4 Times in 3 Posts
|
|
40 cal is correct. They only made the .357 sig for one year. They also made a .380 model SW380M. This was all stated at the beginning of this thread.
__________________
665: Neighbor of the Beast
|

03-07-2010, 02:32 AM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 8
Likes: 0
Liked 4 Times in 2 Posts
|
|
When did the lifetime warranty come into being? I bought a used Sigma originally purchased in 1997 and the manual shows it had only a one year warranty. And yes, it's broken. Seems the striker assembly is bad. It will not cock.
|

03-07-2010, 07:03 AM
|
Member
|
|
|
Join Date: Jan 2003
Location: Sammamish, WA
Posts: 41
Likes: 6
Liked 16 Times in 10 Posts
|
|
Here's my experience...
I bought a used 1st generation SW40 for about $200. A couple of months later I had a case head separation on the range. The ejector was blown off, the slide retention lever was sheared in two, the slide was jammed partially open, half of the shell casing was stuck in the chamber, and the mag was blown out onto the ground. Later, I discovered the bullet lodged in the barrel. I contacted S&W about getting it repaired and they sent me a a prepaid shipping label. I sent tham the gun and about 10 days later I got the gun back. It had been repaired and test fired; cost=$00.00. But as I gave the gun a careful inspection, I noticed a crack in the frame that wrapped up around the trigger guard. So I called S&W and told them what I had found. They sent me a new prepaid shipping label and I returned the gun to them. A few days later I got a call from the service department and was told that the gun was not repairable. So, they offered me the choice of a new 2nd generation SW40VE or credit toward another gun. I took the new SW40VE and got to take advantage of a promotion to get a free range bag.
I still have that Sigma. I used it in IDPA competition for a while with good results. The trigger has smoothed out AND I have gotten used to it. Above all, it is reliable. If only it had a standard sized equipment rail!
BTW, Crimson Trace has a new product coming out shortly for the Sigma. It is a really cool looking laser that fits into the shape of the Sigma's frame, just ahead of the trigger guard. And no, it doesn't use the Sigma's rail. Check it out at S&W Sigma Laserguard Coming Soon | Crimson Trace Laser Grips
Dan
__________________
Gun Control: POA=POI
Last edited by dazlin; 03-07-2010 at 07:07 AM.
|
 |
|
Tags
|
1911, 380, cdnn, concealed, crimson, ejector, extractor, glock, idpa, kydex, leather, model 65, polymer, sd9, sig arms, sigma, sw40ve, sw9ve, tactical, taurus, transition, walther  |
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|