Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson SD & Sigma Pistols
o

Notices

Smith & Wesson SD & Sigma Pistols SD & Sigma Pistols in All Generations


Reply
 
Thread Tools Display Modes
  #1  
Old 06-18-2012, 09:59 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default SD9 compared to SD9VE

Just got home with my SD9VE. I thought I would do some initial comparisons with my SD9.

The SD9 came in a plastic clamshell box with 2 magazines. The SD9VE also came with 2 magazines but was shipped in a blue S&W cardboard box.

Here are a few comparison pics.

SD9 (black slide) above the SD9VE (silver slide)



The slide is melonited on the original SD9 and left bright stainless on the SD9VE. This is really the only noticeable difference until you look close.

The SD9 has been my CCW gun for a while now, the finish is holding up extremely well.
I saw a post that indicated that the loaded chamber indicator might be different, but it is not, not on mine anyway.


You can see that the sights are different. The SD9 rear sight has a set screw that the SD9VE sight does not.


The front sights are similar, but the SD9 has a front night sight, versus just a white dot on the SD9VE.


The SD9VE also has a different, and slightly better, trigger than the SD9. The weight is about the same but the length of pull on the VE is shorter and slightly smoother. I expect it to get even smoother when it's had a bunch of rounds through it. The triggers aren't very different, and I probably wouldn't notice if I didn't have them right here to compare back to back.
Reply With Quote
  #2  
Old 06-18-2012, 10:31 PM
Fat B Fat B is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Dec 2011
Location: Wisconsin
Posts: 377
Likes: 83
Liked 101 Times in 65 Posts
Default

Nice comparision! Thumbs up on the pics and showing us what they are like side by side, much better than just hearing about it.

Trigger is a shorter pull? That's interesting to hear.
Reply With Quote
  #3  
Old 06-19-2012, 11:10 AM
Scrat's Avatar
Scrat Scrat is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Feb 2011
Location: Cedar Rapids,IA
Posts: 188
Likes: 20
Liked 8 Times in 7 Posts
Default

Very nice comp!! after seeing this probably just stick with my sd and leave the ve
Reply With Quote
  #4  
Old 06-19-2012, 12:17 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

I paid $327 plus $10 transfer for this SD9VE. For the money you can't even come close. If S&W can shake the Sigma's reputation (warranted or not) they will have a winner.
Reply With Quote
The Following 3 Users Like Post:
  #5  
Old 06-19-2012, 09:50 PM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

I just got home with a new SD9VE, and I hadn't even noticed that it didn't have the front night sight like the SD9 has. I bought a SD9 when they first came out, and ended up trading it shortly after I bought it...no problems with it, I just found something I wanted more, and needed to use it to help pay for the other gun. I've been wanting to get another one, to carry in my car, and when the SD9VE was announced I thought I would wait and get the new one. I stopped in at my LGS this afternoon to browze, and they had one, and a 40 as well.

When I bought my SD9 it was $399, and the SD9VE that I bought today was $339. It's a good thing when gun prices come down!
Reply With Quote
  #6  
Old 06-19-2012, 10:32 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by GKC View Post
I just got home with a new SD9VE, and I hadn't even noticed that it didn't have the front night sight like the SD9 has. I bought a SD9 when they first came out, and ended up trading it shortly after I bought it...no problems with it, I just found something I wanted more, and needed to use it to help pay for the other gun. I've been wanting to get another one, to carry in my car, and when the SD9VE was announced I thought I would wait and get the new one. I stopped in at my LGS this afternoon to browze, and they had one, and a 40 as well.

When I bought my SD9 it was $399, and the SD9VE that I bought today was $339. It's a good thing when gun prices come down!
Where did you find it? I've had a few folks (DFW area) ask where they could get one.
Reply With Quote
  #7  
Old 06-20-2012, 12:46 AM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

Quote:
Originally Posted by WPWarhawk View Post
Where did you find it? I've had a few folks (DFW area) ask where they could get one.
I bought this one at B&S Guns in Garland. I know they had a SD40VE in the case as well, but I don't know if they had any more SD9VEs, other than the one I bought.
Reply With Quote
  #8  
Old 06-20-2012, 06:46 AM
TangoFoxtrot's Avatar
TangoFoxtrot TangoFoxtrot is offline
US Veteran
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Sep 2011
Location: Nowhereville, USA
Posts: 767
Likes: 139
Liked 315 Times in 191 Posts
Default

Good camparison!
Reply With Quote
The Following User Likes This Post:
  #9  
Old 06-20-2012, 09:18 AM
marlin.357 marlin.357 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Dec 2003
Location: Southern Maryland
Posts: 302
Likes: 6
Liked 22 Times in 19 Posts
Default

How is the slide to frame fit on the SD9VE as compaired to the SD9?
Reply With Quote
  #10  
Old 06-20-2012, 09:58 AM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by marlin.357 View Post
How is the slide to frame fit on the SD9VE as compaired to the SD9?
The SD9 and SDVE are the exact same gun (minus the finish and sights) and both have a good degree of play in frame to slide fit when compared to the Sigma. As I mentioned in other posts I believe its due to the rear rails not being attached to the frame. Not sure what the OP means by stating the SDVE trigger is better than the SD they are exactly the same trigger and sear.

Here are some pics of my Sigma and SD to show how the rear rails are not attached to the frame



Reply With Quote
  #11  
Old 06-20-2012, 10:05 AM
tomaximus's Avatar
tomaximus tomaximus is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jan 2004
Location: Chester County, PA US
Posts: 25
Likes: 7
Liked 0 Times in 0 Posts
Default

Didn't know they came out like that.
__________________
HERE TODAY GONE TOMORROW.
Reply With Quote
  #12  
Old 06-20-2012, 11:01 AM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by tomaximus View Post
Didn't know they came out like that.
Either did I until I bought mine, that is the biggest design flaw with the SD and SDVE the rails should be attached to the frame. I have no idea why S&W did this as far as I know they are the only ones who have done this. It is a very weak design.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 06-20-2012, 11:16 AM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
Not sure what the OP means by stating the SDVE trigger is better than the SD they are exactly the same trigger and sear.
Must just be the difference in two individual guns. The trigger on my VE is definitely smoother than the SD9. Maybe that makes it feel like a shorter pull, but it definitely feels that way to me and 2 others who have looked at it.
Reply With Quote
  #14  
Old 06-20-2012, 11:25 AM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by WPWarhawk View Post
Must just be the difference in two individual guns. The trigger on my VE is definitely smoother than the SD9. Maybe that makes it feel like a shorter pull, but it definitely feels that way to me and 2 others who have looked at it.
Im sure it feels different to you as there will be a slight difference between spring rate and final machining of the sear assembly from gun to gun but they are the exact same assembly.

nice write up though are the sights plastic on the SDVE?
Reply With Quote
The Following User Likes This Post:
  #15  
Old 06-20-2012, 12:11 PM
mlk18's Avatar
mlk18 mlk18 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2005
Location: U.S.A.
Posts: 2,426
Likes: 296
Liked 785 Times in 356 Posts
Default

Quote:
Either did I until I bought mine, that is the biggest design flaw with the SD and SDVE the rails should be attached to the frame. I have no idea why S&W did this as far as I know they are the only ones who have done this. It is a very weak design.
Design flaw and weak design were the same words described when polymer frames came out. Of course time proved those naysayers wrong. We'll see if the SD9 series rail design does the same. My SD9 has surpassed the 2,500 round mark with no issues or wear whatsoever. The internals look like new.
Reply With Quote
The Following 3 Users Like Post:
  #16  
Old 06-20-2012, 01:38 PM
tomaximus's Avatar
tomaximus tomaximus is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jan 2004
Location: Chester County, PA US
Posts: 25
Likes: 7
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
.

nice write up though are the sights plastic on the SDVE?
My rear sight is plastic, but the front is metal.
__________________
HERE TODAY GONE TOMORROW.
Reply With Quote
  #17  
Old 06-20-2012, 01:58 PM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by mlk18 View Post
Design flaw and weak design were the same words described when polymer frames came out. Of course time proved those naysayers wrong. We'll see if the SD9 series rail design does the same. My SD9 has surpassed the 2,500 round mark with no issues or wear whatsoever. The internals look like new.
The rails are not attached to the frame its not a theory its basic physics.
Reply With Quote
  #18  
Old 06-20-2012, 02:09 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
Im sure it feels different to you as there will be a slight difference between spring rate and final machining of the sear assembly from gun to gun but they are the exact same assembly.

nice write up though are the sights plastic on the SDVE?
S&W's sale literature mentions a "Self Defense Trigger", so I thought maybe there was a difference.

I hadn't thought to check ... the front sight is steel, the rear is plastic.
Reply With Quote
  #19  
Old 06-20-2012, 02:14 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by GKC View Post
I bought this one at B&S Guns in Garland. I know they had a SD40VE in the case as well, but I don't know if they had any more SD9VEs, other than the one I bought.
Thanks Ken, I went into B&S Guns ONCE and decided they should rename the place BS Guns. They must have cut their prices since I was there last year.
Reply With Quote
  #20  
Old 06-20-2012, 02:19 PM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by WPWarhawk View Post
S&W's sale literature mentions a "Self Defense Trigger", so I thought maybe there was a difference.
Thats what they put in the original SD as well which is what I showed a pic of in my SD40. The sear acts like a lever instead of the funky design of the Sigma sear. I really think it had to do with the lawsuit, why wait this long to fix the one thing everyone disliked about the Sigam
Reply With Quote
  #21  
Old 06-20-2012, 09:43 PM
GKC's Avatar
GKC GKC is offline
US Veteran
Absent Comrade
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Feb 2010
Location: Texas
Posts: 5,143
Likes: 3,701
Liked 5,261 Times in 1,885 Posts
Default

Quote:
Originally Posted by WPWarhawk View Post
Thanks Ken, I went into B&S Guns ONCE and decided they should rename the place BS Guns. They must have cut their prices since I was there last year.
It's a funny thing, but I mainly go to three gun shops in my local area...and the prices are never the same for any one gun in all three shops...not even close. One particular gun will be higher in one shop, lower in the other, and about in the middle in the third. For a different gun, the shop that was high is now lower than the other two, and so on. I have learned to be a comparison shopper, and check prices in all three before I buy in one. (I also check online, as well as this and other forums for pricing information.)

The guys at B&S Guns have been good to me, and I've done a lot of business there. I know that there are negative comments about them, but I've always felt good about my experiences there. Of course, I am a really wonderful guy...

One thing I was say that is a negative is that they are VERY high on their ammo prices. I usually buy my ammo at Academy Sports, or one of the other two local shops.
Reply With Quote
  #22  
Old 06-21-2012, 09:15 AM
marlin.357 marlin.357 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Dec 2003
Location: Southern Maryland
Posts: 302
Likes: 6
Liked 22 Times in 19 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
The SD9 and SDVE are the exact same gun (minus the finish and sights) and both have a good degree of play in frame to slide fit when compared to the Sigma. As I mentioned in other posts I believe its due to the rear rails not being attached to the frame.
On my SD the play is the same at the front and rear about .015", but surprisingly doesn't seem to affect accuracy--at least in my hands
Reply With Quote
The Following User Likes This Post:
  #23  
Old 06-21-2012, 11:05 AM
mlk18's Avatar
mlk18 mlk18 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2005
Location: U.S.A.
Posts: 2,426
Likes: 296
Liked 785 Times in 356 Posts
Default

Quote:
The rails are not attached to the frame its not a theory its basic physics.
I am not a Physicist or a professional firearm designer, but something tells me Smith & Wesson has at least one of them on staff. I am also betting that when they designed the SD9 they did so with intention of it working and being at least minimally durable. I will further bet that they tested the design and were pleased with it. And gosh golly they were successful because my SD9's are accurate, reliable and so far very durable. So my score card reads: Reality 1 - Physics 0.
Reply With Quote
The Following 4 Users Like Post:
  #24  
Old 06-21-2012, 11:35 AM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by mlk18 View Post
I am not a Physicist or a professional firearm designer, but something tells me Smith & Wesson has at least one of them on staff. I am also betting that when they designed the SD9 they did so with intention of it working and being at least minimally durable. I will further bet that they tested the design and were pleased with it. And gosh golly they were successful because my SD9's are accurate, reliable and so far very durable. So my score card reads: Reality 1 - Physics 0.

Ok we get you like the fact that the rear rails are not attached to the frame what is your point? Have you ever even taken a look at the sear block in the SD? There is almost no plastic actually holding the rear rails in place.

The problem with the internet is there are just too many kids online with zero knowledge. Having the rear rails attached to the frame is by far stronger and provides less movement than having them directly mounted to the frame.

Who knows why S&W put the rear rails in the sear block, the only thing I can come up with is reduced production cost as well as repair cost. There is a reason no one else is doing this.
Reply With Quote
The Following User Likes This Post:
  #25  
Old 06-21-2012, 12:17 PM
AmbroseLee's Avatar
AmbroseLee AmbroseLee is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2012
Location: PA
Posts: 2
Likes: 1
Liked 0 Times in 0 Posts
Default

WPWarhawk, it looks like the rear sight on the SD9VE says "M&P" on it. Is that the sight that came on the gun? Is Smith & Wesson using extra M&P sights for the SD9VE? Interesting.
__________________
regards,
Dave
Reply With Quote
  #26  
Old 06-21-2012, 02:21 PM
Horace & Daniel's Avatar
Horace & Daniel Horace & Daniel is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Aug 2011
Location: Oklahoma
Posts: 372
Likes: 52
Liked 201 Times in 64 Posts
Default

All I want to know is what the hell does "VE" strand for?
Reply With Quote
  #27  
Old 06-21-2012, 02:26 PM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by Horace & Daniel View Post
All I want to know is what the hell does "VE" strand for?
"value enhanced" or just a product code
Reply With Quote
  #28  
Old 06-21-2012, 02:35 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by AmbroseLee View Post
WPWarhawk, it looks like the rear sight on the SD9VE says "M&P" on it. Is that the sight that came on the gun? Is Smith & Wesson using extra M&P sights for the SD9VE? Interesting.
You've got it backwards, the M&P rear sight is what came on the older SD9, the one with the blackened slide.
Reply With Quote
  #29  
Old 06-21-2012, 03:39 PM
mlk18's Avatar
mlk18 mlk18 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2005
Location: U.S.A.
Posts: 2,426
Likes: 296
Liked 785 Times in 356 Posts
Default

Quote:
Ok we get you like the fact that the rear rails are not attached to the frame what is your point?
My point is that no one is having any problems with the design and it is likely no one ever will. We all get that you don't like it and feel that it is some kind of violation of how guns are supposed to be made. It seem that S&W disagrees. And if for some reason the design does become an issue, we all have lifetime warranties to cover us. Who knows, maybe we will all get brand new SD9 Gen3's out of the deal.
Reply With Quote
The Following User Likes This Post:
  #30  
Old 06-21-2012, 04:54 PM
cocojo cocojo is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Mar 2005
Location: Hooksett , NH
Posts: 116
Likes: 1
Liked 32 Times in 20 Posts
Default

I have no problem with the back rails being a module. If there is ever a problem Smith will fix it. My new shield is the same way and that's an M&P. When Glock e series had rear rails break they had to replace the whole frame and a lot of them. I like the SD because it's plain and simple the way i like a working gun. Good looking too.
Reply With Quote
The Following User Likes This Post:
  #31  
Old 06-21-2012, 07:43 PM
Out West's Avatar
Out West Out West is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2002
Location: Fort Worth, Texas
Posts: 1,412
Likes: 255
Liked 307 Times in 140 Posts
Default

Maybe it is what the advertising calls the "steel subframe". Touted as an advantage.

Out
West
Reply With Quote
  #32  
Old 06-21-2012, 07:46 PM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

It appears to be a cost cutting method to me, when i fire my SD you can see the entire back of the slide move from the tension right before the trigger breaks
Reply With Quote
  #33  
Old 06-22-2012, 10:18 AM
patbelly patbelly is offline
US Veteran
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2011
Posts: 239
Likes: 45
Liked 34 Times in 21 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
It appears to be a cost cutting method to me, when i fire my SD you can see the entire back of the slide move from the tension right before the trigger breaks
My Kahr CW9 does that and I can guarantee it is not from the rails moving.
Reply With Quote
The Following 2 Users Like Post:
  #34  
Old 06-22-2012, 04:10 PM
scandmx5's Avatar
scandmx5 scandmx5 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Newnan, GA
Posts: 101
Likes: 2
Liked 4 Times in 4 Posts
Default

Does it rattle as bad as the first gens?
Reply With Quote
  #35  
Old 06-22-2012, 07:07 PM
mlk18's Avatar
mlk18 mlk18 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2005
Location: U.S.A.
Posts: 2,426
Likes: 296
Liked 785 Times in 356 Posts
Default

Neither my SD9 or my SD9 VE rattles any more than my Glocks or M&P's, so I am not sure what you mean.
Reply With Quote
  #36  
Old 06-22-2012, 09:32 PM
scandmx5's Avatar
scandmx5 scandmx5 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Newnan, GA
Posts: 101
Likes: 2
Liked 4 Times in 4 Posts
Default

Quote:
Originally Posted by mlk18 View Post
Neither my SD9 or my SD9 VE rattles any more than my Glocks or M&P's, so I am not sure what you mean.
I never owned any in 9. I had 2 SD40's and that was the most rattly gun I've ever heard. The mags sounded like a ball-bearing in a coke can. I never heard any of the 9mm guys have that issue, just other .40 owners. The G19 I owned was silent compared to the SD lol. Either way, I love S&W's and the SD/SDVE's look so much better than Glocks. I loved the melonite and the new duotone models equally.
Reply With Quote
The Following User Likes This Post:
  #37  
Old 07-04-2012, 01:40 PM
1wwall 1wwall is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2012
Location: Memphis, TN
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
Default

I dont know about you guys, but our instructor always told us "never carry a semi-auto for duty or combat that doesn't rattle, if it doesn't rattle it'll likely jam on you". I have carried several S&W semis as well as glocks over the years and they have all rattled. Even the Sig 229 I carried was a rattler. One thing I've noticed on the .40 mags rattling, I've observed that they are also marked .357 sig. Maybe this has something to do with it? The ones for my M&P (that absolutely loves me and the feeling is mutual) sounds like it is coming apart, none of my older models did (4006, 4056, 411).
__________________
Warren
Reply With Quote
  #38  
Old 07-09-2012, 12:16 AM
vipermd's Avatar
vipermd vipermd is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2006
Location: U.P. Mi
Posts: 2,060
Likes: 8,959
Liked 1,270 Times in 693 Posts
Default

40 sw and 357 sig use the same mag
__________________
I BACK OUR BLUE
Reply With Quote
  #39  
Old 07-10-2012, 06:36 PM
Fat B Fat B is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Dec 2011
Location: Wisconsin
Posts: 377
Likes: 83
Liked 101 Times in 65 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
Not sure what the OP means by stating the SDVE trigger is better than the SD they are exactly the same trigger and sear.
I don't know. I handled a SDVE the other day and the trigger felt like a different design. Seemed shorter, had a more audible snap and concrete feel to the firing pin being released. I'd bet my money that something was tweeked. More than just the machining variations. Or it could be that my SD is just worn and the feel of a new one seems strange but I don't think so.
Reply With Quote
  #40  
Old 08-27-2012, 05:27 AM
dondavis3's Avatar
dondavis3 dondavis3 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2009
Location: Dallas / Forth Worth Area
Posts: 387
Likes: 3
Liked 50 Times in 28 Posts
Default

@ original OP

Thanks for the write-up and pictures.

__________________
5906,M&P5",9c,Shield,9VE, .45c
Reply With Quote
The Following User Likes This Post:
  #41  
Old 09-25-2012, 09:49 AM
Armed Babysitter's Avatar
Armed Babysitter Armed Babysitter is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2011
Posts: 182
Likes: 21
Liked 31 Times in 23 Posts
Default

WPWarhawk, 3 months later, how's the SD9VE treating you? Has it turned out to be as reliable as the original SD9?
Reply With Quote
  #42  
Old 09-26-2012, 12:56 AM
EBK EBK is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Sep 2012
Posts: 325
Likes: 36
Liked 102 Times in 68 Posts
Default

Quote:
Originally Posted by mlk18 View Post
I am not a Physicist or a professional firearm designer, but something tells me Smith & Wesson has at least one of them on staff. I am also betting that when they designed the SD9 they did so with intention of it working and being at least minimally durable. I will further bet that they tested the design and were pleased with it. And gosh golly they were successful because my SD9's are accurate, reliable and so far very durable. So my score card reads: Reality 1 - Physics 0.
The SIG P250 does this as well the whole chassis lifts out and can be swapped into different size frames.

Not to mention it makes fixing a busted rail that much easier should it ever occur.

Like you said Smith and Wesson had a clue when they did this or they would have stuck with the standard design.
Reply With Quote
The Following User Likes This Post:
  #43  
Old 11-21-2012, 06:29 PM
WPWarhawk's Avatar
WPWarhawk WPWarhawk is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Jun 2004
Location: Hot Springs, Arkansas
Posts: 649
Likes: 293
Liked 570 Times in 198 Posts
Default

Quote:
Originally Posted by Armed Babysitter View Post
WPWarhawk, 3 months later, how's the SD9VE treating you? Has it turned out to be as reliable as the original SD9?
No complaints here, I think the SD9 is the best bargain out there in a 9mm handgun. At least two people who have shot mine bought one just like it.
Reply With Quote
  #44  
Old 11-22-2012, 09:15 PM
Crosbo Crosbo is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Nov 2012
Location: SATX
Posts: 14
Likes: 6
Liked 5 Times in 3 Posts
Default

Just picked up the SD9VE last evening. Looking forward to the first cleaning tomorrow, then the first trip to the range.
Reply With Quote
  #45  
Old 11-30-2012, 10:00 PM
BeNotAfraid's Avatar
BeNotAfraid BeNotAfraid is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Sep 2010
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Great posts, men! I'm basically a S&W wheel-guy, but decided to jump into the pistols and just went out today and bought me three SDVE9s. Got a heck of a deal here in central Ohio at Mike Goschinski's "Fin, Feather & Fur Outfitters" in Ashland, OH. $289 per.

I went with the 9mms, since ammo is plentiful for range work and plinking and with some of the newer self-defense rounds, they will do me aok with 17 rounds in hand. I've been hearing stories about mobs and gangs from guys who have been actually set upon, and I felt my S&W six shooters weren't up to "mob capacity."

Am cleaning them all tonight. I am astounded at the fine fit and finish on the barrel and slide on two of them. One of the three seems to have milling marks on the square sides of the barrel and a substantial burr on the lock-up lug where it was broached, but, hey, what do you want for a production gun at these prices? I'll file off the burr and keep the marks--it adds charachter!

Local stores here in Ohio can't keep the 9mm SDVE in stock, even though the factory is churning out 150+ daily. GO S&W!
Reply With Quote
The Following User Likes This Post:
  #46  
Old 12-01-2012, 11:04 AM
11shooter 11shooter is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2004
Location: Indianapolis, Indiana, US
Posts: 15
Likes: 2
Liked 5 Times in 5 Posts
Default

Thanks for all the great comments and the pictures. I've carried my Sigma 9VE cocked and locked since 2004, when I was robbed and fired upon. During the hearings and the trial I was followed and chased by thugs, and my rear van window was shot out one night. I depend on my gun for my life. I'm glad Smith and Wesson is still working that design and improving on it. If the newer models are anything like my 9-year-old 9VE, they will protect and serve for many years. My hat's off to S&W. If I could afford one more gun, I would go out and get a new SD9VE today.

By the way, my 9VE passed the 5,000 round mark a while back. I don't even keep count now. I've worn out two or three recoil springs. It keeps on ticking. I remember how hard it was to shoot to my 9VE when I first got it. Now it's smoothe as silk. I doesn't rattle unless the slide is locked open.

In case you're wondering -- The robber did 5 years. After that, I watched for him in case he came after me and my family for putting him away. Last September he was shot in the back and the head. I didn't follow the story, but I figure he's dead. I need to get some of that Hornady "Zombie Max" ammo just in case!

Magazines -- Will the new models take the old mags, especially the 17-rounders? I should change my username to "18shooter." For the past 5 or 6 years I have carried two 17-round mags. I keep three 10-round mags in my range case. I have fired several 300-round sessions with slow lead bullets, as well as a couple of even longer sessions with jacketed bullets. My 9VE will shoot anything I load into it, even +P "premium" ammo, which I no longer carry. (I shoot standard pressure ammo better.) The only modification I have made to my 9VE was to polish the feed ramp.

I expect you'll get many years of service from this little gem. Good luck.
__________________
>==|||==={|
Reply With Quote
The Following User Likes This Post:
  #47  
Old 12-01-2012, 11:08 AM
cbr6864 cbr6864 is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Oct 2010
Location: Texas
Posts: 718
Likes: 49
Liked 150 Times in 88 Posts
Default

Quote:
Originally Posted by 11shooter View Post
Thanks for all the great comments and the pictures. I've carried my Sigma 9VE cocked and locked since 2004,
How do you manage that as there is no safety and its a DAO handgun?
Reply With Quote
  #48  
Old 12-01-2012, 02:03 PM
HeavyChevy HeavyChevy is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Dec 2012
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I want to thank you for the post, I am in the process of purchasing my first handgun and liked the SV9...your post made it easier to decide. It'll be home soon....thanks again
Reply With Quote
  #49  
Old 12-02-2012, 11:46 AM
leejack's Avatar
leejack leejack is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: Nov 2007
Location: The Alamo!
Posts: 1,172
Likes: 578
Liked 378 Times in 174 Posts
Smile

To the OP: Good post, thanks for sharing the pictures.

The SD9VE is on my list.

The bottom line for me is based on my experience with the sigma, that is; it just gets better every time you shoot it.
__________________
SD9VE, American perfection!
Reply With Quote
  #50  
Old 12-03-2012, 09:54 AM
11shooter 11shooter is offline
Member
SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE SD9 compared to SD9VE  
Join Date: May 2004
Location: Indianapolis, Indiana, US
Posts: 15
Likes: 2
Liked 5 Times in 5 Posts
Default

Quote:
Originally Posted by cbr6864 View Post
How do you manage that as there is no safety and its a DAO handgun?
Perhaps I don't know what "cocked and locked" means. What I meant to say is that I carry a live round in the chamber as well as 17 rounds in the magazine.
__________________
>==|||==={|
Reply With Quote
The Following User Likes This Post:
Reply

Tags
sd9 sd9ve

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DA/SA on SW 915 compared to M&P9 vboy36 Smith & Wesson M&P Pistols 22 06-06-2016 08:01 AM
Has anyone ever compared ........ whooziss Smith & Wesson Semi-Auto Pistols 2 05-13-2016 02:05 PM
M&P 9c vs FNS 9c - Compared? OldGoat Smith & Wesson M&P Pistols 15 04-03-2016 09:00 AM
You just THINK you had a bad day, compared to this guy! tom turner The Lounge 7 07-30-2014 08:40 PM
M&P 45C compared to G36 ToddS112 Smith & Wesson M&P Pistols 2 02-13-2009 08:19 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 08:11 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)