|
|
03-12-2010, 05:43 PM
|
SWCA Member Absent Comrade
|
|
|
Join Date: May 2008
Location: Fairport, New York
Posts: 1,155
Likes: 154
Liked 3,461 Times in 489 Posts
|
|
Model 59 7.65 (30 Luger) Caliber..... Please comment
Here is the newly acquired Model 59, I finally was able to get yesterday. The gun is an early model in the A17XXXX range. The gun has the relief cuts on the frame for the manual safety, the longer magazine release button, longer slide stop/takedown pin, and the hole in the hammer. The gun also has five very unique features. (1)The gun is Saudia Arabian marked,(2) it has curved/arched backstrap with no lanyard loop, and (3)the gun is wearing factory thin, full checkered, non medallion Rosewood grips. (4) The fourth feature is that the gun has a grooved trigger. **Interesting note** The spring issue of the 2006 S&WCA journal on page 69, section 5.13 has a paragraph and picture of a grooved trigger on a steel frame Model 39, saying that this is the only one (grooved trigger) known to exist, but since Model 39 and Model 59 triggers are the same, we now know there are at least two grooved triggers in existense, since there is one on this Model 59. (5) The fifth and best feature of this gun is that the gun is in 7.65 (30 Luger) caliber. The barrel and magazine floor plates are stamped 7.65 M.M.
There are no proof marks anywhere on the gun or barrel. The barrel is wider at the muzzle to fit/work with the barrel bushing.
I know this Model 59 does not compare to the fabulous revolvers alot of fellow members own and have shared pictures of, but I feel this Model 59 deserves an honorable mention. Please comment.
|
The Following User Likes This Post:
|
|
03-12-2010, 06:36 PM
|
Member
|
|
|
Join Date: Nov 2006
Location: Southeast Texas
Posts: 1,656
Likes: 746
Liked 1,447 Times in 540 Posts
|
|
WHOA!
A Smith 59 in .30 Luger????????
First time I've even heard of one much less seen one.
Is .30 Luger even MADE anymore?
__________________
The Last Standing Knight
|
The Following User Likes This Post:
|
|
03-12-2010, 06:50 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,782
Likes: 2,486
Liked 8,318 Times in 2,919 Posts
|
|
Awesome!...Simply AWESOME!
I will have to open the book now and do some research.
Your backstrap looks like a Model 39-2, Is your gun a 14 shot double stack?
The "hole" hammer is from the original Model 39
Is your frame steel or aluminum and is it groove or check cut at the front & back or smooth?
Always wondered why S&W didnt offer wood grips for the 59 series or a barrel chambered for 30 Mauser.
Congrats on a rare and unusual find...Can you post more pics?
If you dont mind me asking...Where did you find it...?
NOT:..Just checked the SCSW 3rd edition, page 223 says "Unconfirmed report of at least one model 39 or 39-2 chambered for the .30 Luger cartridge...Nothing found about a 59 in 30 Luger.
You DEFINATELY should get it lettered!
NEED more Pics!
Last edited by Engine49guy; 03-12-2010 at 07:14 PM.
|
The Following User Likes This Post:
|
|
03-12-2010, 07:10 PM
|
US Veteran
|
|
|
Join Date: Aug 2005
Location: Albuquerque
Posts: 151
Likes: 0
Liked 2 Times in 2 Posts
|
|
Great gun! You should think about a factory letter on this one.
I think the the 30 Luger is not uncommon in export guns. Browning made some Hi-powers in that caliber also.
I will tell you I hate to load the 30 Luger - between the bottleneck case and the small bullet I've never found them easy to reload.
By the way, don't use the 7.62 Tokarev ammo in you gun. The 7.62 runs at higher pressures even though the case size and bullet are simlar.
|
The Following User Likes This Post:
|
|
03-12-2010, 07:49 PM
|
|
Administrator
|
|
|
Join Date: Nov 2003
Location: Columbus, Ohio
Posts: 2,348
Likes: 3,509
Liked 3,973 Times in 600 Posts
|
|
Way cool. Thanks for sharing. Congratulations on finding a "one of a kind". That is always a prize.
__________________
Dave
|
The Following User Likes This Post:
|
|
03-12-2010, 07:51 PM
|
|
Administrator
|
|
|
Join Date: Mar 2005
Posts: 27,012
Likes: 8,991
Liked 48,761 Times in 9,259 Posts
|
|
That's very neat.
I had heard of them, but never seen one.
__________________
Regards,
Lee Jarrett
|
The Following User Likes This Post:
|
|
03-12-2010, 07:54 PM
|
Member
|
|
|
Join Date: May 2009
Location: Western North Carolina
Posts: 434
Likes: 480
Liked 27 Times in 23 Posts
|
|
definitely worth the 'honorable mention' a rare bird indeed.
|
The Following User Likes This Post:
|
|
03-12-2010, 08:00 PM
|
|
Moderator
|
|
|
Join Date: May 2006
Location: N.AZ
Posts: 3,873
Likes: 614
Liked 2,399 Times in 595 Posts
|
|
That's one heck of a find!!! Congratulations!
I can't wait to hear more about it!
Being a 59 fan, that's beats any revolver I have, no matter how shiny!
|
The Following User Likes This Post:
|
|
03-12-2010, 10:20 PM
|
|
Member
|
|
|
Join Date: May 2005
Location: U.S.A.
Posts: 2,426
Likes: 296
Liked 785 Times in 356 Posts
|
|
I wonder if it was part of a special order as it does not seem to be a cataloged item. Either way it has to be VERY rare. I too would get a letter from S&W asap. More photos please!
|
03-13-2010, 12:32 AM
|
SWCA Member Absent Comrade
|
|
|
Join Date: May 2008
Location: Fairport, New York
Posts: 1,155
Likes: 154
Liked 3,461 Times in 489 Posts
|
|
Quote:
Originally Posted by Engine49guy
Awesome!...Simply AWESOME!
I will have to open the book now and do some research.
Your backstrap looks like a Model 39-2, Is your gun a 14 shot double stack?
The "hole" hammer is from the original Model 39
Is your frame steel or aluminum and is it groove or check cut at the front & back or smooth?
Always wondered why S&W didnt offer wood grips for the 59 series or a barrel chambered for 30 Mauser.
Congrats on a rare and unusual find...Can you post more pics?
If you dont mind me asking...Where did you find it...?
NOT:..Just checked the SCSW 3rd edition, page 223 says "Unconfirmed report of at least one model 39 or 39-2 chambered for the .30 Luger cartridge...Nothing found about a 59 in 30 Luger.
You DEFINATELY should get it lettered!
NEED more Pics!
|
To answer your questions. I got this from a serious collector who has a knack for finding great guns. I knew of this gun for a while and was lucky to buy it, as the original potential first buyer's deal fell through. Yes this is a 14 shot double stack gun. The front strap is serrated, and it has a half smooth, half checkered special Model 59 backstrap, as the grip frame is wider than a Model 39. The guns frame is alloy. Early Model 59's also had holes in the hammers up until about serial number A180000, when the practice was stopped. I was also able to confirm that the S&W factory did indeed make wood grips on a special order basis for Model 59's, not a regular offered item. Having just got this, I have alot of research to do. Thank you for you comments, and interest.
|
The Following User Likes This Post:
|
|
03-13-2010, 01:10 AM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Jun 2009
Location: Texas
Posts: 7,580
Likes: 13,500
Liked 6,743 Times in 2,526 Posts
|
|
I haven't had much trouble loading the 7.65mm Luger round. I fire it in a 1906 American Eagle luger. I use mostly cast bullets, and there isn't much loading data around on it.
Dont worry about a 7.62 Tokarev round finding it's way into your 7.65mm Luger chamber, the Tokarev round is about 1/8 inch longer than the 7.65 Luger.
|
The Following User Likes This Post:
|
|
03-13-2010, 01:12 AM
|
Member
|
|
|
Join Date: Nov 2007
Location: west coast
Posts: 1,486
Likes: 0
Liked 55 Times in 34 Posts
|
|
I strongly suspect that your custom M59 came out of Italy. The reason I believe that is civilian ownership of military caliber pistols are restricted, and the 7.62 Parabellum is a popular alternative to 9x19. You will also find Browning HP and various Beretta, Czech, and German pistols in that caliber.
Also, in my business trips to Saudi Arabia and Kuwait, many of the rarely available (if not most) sporting arms are imported from vendors in Italy. If you think gun ownership is tightly restricted in some parts of Europe and the USA, you should look at what it is like in Saudi Arabia. If you are not authorized military, police, or have "connections", it's very difficult to own a pistol.
|
The Following User Likes This Post:
|
|
03-13-2010, 04:17 PM
|
SWCA Member Absent Comrade
|
|
|
Join Date: May 2008
Location: Fairport, New York
Posts: 1,155
Likes: 154
Liked 3,461 Times in 489 Posts
|
|
Quote:
Originally Posted by The Last Standing Knight
A Smith 59 in .30 Luger????????
First time I've even heard of one much less seen one.
Is .30 Luger even MADE anymore?
|
Fiocchi still makes 7.65 (30 Luger) Ammo. I bought two boxes of ball ammo just to have to go with the gun. It was about $50 shipped.
|
The Following User Likes This Post:
|
|
03-13-2010, 04:36 PM
|
Member
|
|
|
Join Date: Nov 2009
Posts: 46
Likes: 0
Liked 7 Times in 6 Posts
|
|
curious caliber choice
Quote:
Originally Posted by Model39
Here is the newly acquired Model 59, I finally was able to get yesterday. The gun is an early model in the A17XXXX range. The gun has the relief cuts on the frame for the manual safety, the longer magazine release button, longer slide stop/takedown pin, and the hole in the hammer. The gun also has five very unique features. (1)The gun is Saudia Arabian marked,(2) it has curved/arched backstrap with no lanyard loop, and (3)the gun is wearing factory thin, full checkered, non medallion Rosewood grips. (4) The fourth feature is that the gun has a grooved trigger. **Interesting note** The spring issue of the 2006 S&WCA journal on page 69, section 5.13 has a paragraph and picture of a grooved trigger on a steel frame Model 39, saying that this is the only one (grooved trigger) known to exist, but since Model 39 and Model 59 triggers are the same, we now know there are at least two grooved triggers in existense, since there is one on this Model 59. (5) The fifth and best feature of this gun is that the gun is in 7.65 (30 Luger) caliber. The barrel and magazine floor plates are stamped 7.65 M.M.
There are no proof marks anywhere on the gun or barrel. The barrel is wider at the muzzle to fit/work with the barrel bushing.
I know this Model 59 does not compare to the fabulous revolvers alot of fellow members own and have shared pictures of, but I feel this Model 59 deserves an honorable mention. Please comment.
|
Thanks for posting about your unusual Kingdom of Saudi Arabia stamped pistol.
I imagine the only reason why anybody would go the trouble of acquiring a 7.65mm version of a perfectly good 9mm is because the local laws prohibit possession of 9mm. As john traveler mentioned, Italy is one of these countries, but not the only one.
Perhaps a Saudi acquired a 7.65mm while working in one of these countries and brought it back home to be stamped with the Saudi coat of arms and Kingdom of Saudi Arabia.
Please post the contents of your historical letter as an update.
|
The Following User Likes This Post:
|
|
03-14-2010, 04:09 PM
|
SWCA Member Absent Comrade
|
|
|
Join Date: May 2008
Location: Fairport, New York
Posts: 1,155
Likes: 154
Liked 3,461 Times in 489 Posts
|
|
Quote:
Originally Posted by mlk18
I wonder if it was part of a special order as it does not seem to be a cataloged item. Either way it has to be VERY rare. I too would get a letter from S&W asap. More photos please!
|
Here is a photo of the left side of the gun with the slide locked back to show the exposed barrel. I removed the barrel from another 9MM 59 I own to show how the barrel differs between the two. The standard factory 9MM is blued and is straight, while the 7.65 (30 Luger) barrel is not blued and bells out at the end to fit/work with the slide bushing.
You can also see the special curved backstrap the gun has. I am reluctant to post alot of pictures, as the camera I have/use cannot give the clear sharp pictures I know all of you would like me to produce.
|
The Following User Likes This Post:
|
|
03-15-2010, 01:01 AM
|
Member
|
|
|
Join Date: Oct 2007
Location: USA
Posts: 1,158
Likes: 2,291
Liked 394 Times in 221 Posts
|
|
Quote:
Originally Posted by 1066
Great gun! You should think about a factory letter on this one.
I think the the 30 Luger is not uncommon in export guns. Browning made some Hi-powers in that caliber also.
I will tell you I hate to load the 30 Luger - between the bottleneck case and the small bullet I've never found them easy to reload.
By the way, don't use the 7.62 Tokarev ammo in you gun. The 7.62 runs at higher pressures even though the case size and bullet are simlar.
|
Tokarv and Mauser C-96 wont chamber in a 30 Luger pistol. While similar looking, the 30 Luger is case 19mm long, and the '30 cal' Tokarev/C96 Mauser ammunition is based on a longer 25mm case.
Sadly, the Tokarev/Mauser ammunition is far more common; there is military surplus on the market, due ti it's extensive use in foremer Soviet Bloc countries, as well as in China, and elsewhere in SE Asia.
|
The Following User Likes This Post:
|
|
03-15-2010, 03:23 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2004
Location: North Carolina
Posts: 587
Likes: 125
Liked 134 Times in 58 Posts
|
|
Very interesting and good find. I remember while in Germany in the late 80s, Frankoniea had Smith 659s for sale that had a three barrel set, 7.65 Luger, 9x19 and 9x21. Germans were buying alot of Smith and Wesson products then with several models not listed in the US.
CD
__________________
De Oppresso Liber
|
The Following User Likes This Post:
|
|
03-22-2010, 08:40 PM
|
Member
|
|
|
Join Date: May 2009
Location: OC
Posts: 504
Likes: 199
Liked 288 Times in 158 Posts
|
|
Quote:
Originally Posted by 1066
Great gun! You should think about a factory letter on this one.
I think the the 30 Luger is not uncommon in export guns. Browning made some Hi-powers in that caliber also.
I will tell you I hate to load the 30 Luger - between the bottleneck case and the small bullet I've never found them easy to reload.
By the way, don't use the 7.62 Tokarev ammo in you gun. The 7.62 runs at higher pressures even though the case size and bullet are simlar.
|
FYI: Tokarev ammo is the lenght of >.30 Mauser not .30 Luger.
|
The Following User Likes This Post:
|
|
03-22-2010, 08:41 PM
|
Member
|
|
|
Join Date: May 2009
Location: OC
Posts: 504
Likes: 199
Liked 288 Times in 158 Posts
|
|
Quote:
Originally Posted by 1066
Great gun! You should think about a factory letter on this one.
I think the the 30 Luger is not uncommon in export guns. Browning made some Hi-powers in that caliber also.
I will tell you I hate to load the 30 Luger - between the bottleneck case and the small bullet I've never found them easy to reload.
By the way, don't use the 7.62 Tokarev ammo in you gun. The 7.62 runs at higher pressures even though the case size and bullet are simlar.
|
FYI: Tokarev ammo is the length of .30 Mauser not .30 Luger.
|
03-22-2010, 11:13 PM
|
Member
|
|
|
Join Date: May 2009
Location: Miami, FL and Italy
Posts: 13
Likes: 1
Liked 1 Time in 1 Post
|
|
I don't think that the pistol comes from an Italian importer. Every single pistol imported in Italy must have the proof marks of the "Banco Nazionale di Prova" of Gardone Val Trompia on barrel, slide and frame ( Banco Nazionale di Prova per le Armi da Fuoco Portatili e per le munizioni commerciali.).
.30 Luger IMHO is a very nice caliber,although less powerfull than 9 Parabellum and actually it was used in Italy and in many countries where 9x19 was not legal as well. At present in Italy they bypass the problem with 9x21. Although reloading .30 luger could be a bit tricky, shooting it is a real pleasure and as a matter of fact, it is amazingly accurate,
|
The Following User Likes This Post:
|
|
03-23-2010, 12:41 AM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: Jun 2009
Location: Texas
Posts: 7,580
Likes: 13,500
Liked 6,743 Times in 2,526 Posts
|
|
I wonder if any 39s had 7.65mm Luger barrels?
|
The Following User Likes This Post:
|
|
|
Tags
|
223, beretta, browning, cartridge, grooved, military, model 39, rosewood, scsw, serrated, smith and wesson, takedown, tokarev |
Posting Rules
|
|
|
|
|