Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Reply
 
Thread Tools Display Modes
  #1  
Old 05-25-2010, 05:46 PM
preventec47 preventec47 is offline
Member
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 67
Likes: 0
Liked 7 Times in 5 Posts
Default Holster Trick for 4506 and 1006 owners

This weekend I took my 4506-1 to gunshow to find a holster
and a distributor for HUME holsters had a very small variety.
Just for kicks I shoved my gun into a holster that was supposedly
made for a SIG 220 or 226 and it fit perfectly. I then searched
out the only two other style holsters he had for the Sig 220 and
Sig 226 and they fit perfectly also.

Specifically I own the 4506-1 and a 1006 which both have a rounded
off trigger guard and the Sig pistols have squared off trigger guards
but the trigger guards of my SW seemed to perfectly fit the
trigger guard indentions in the Hume holsters. Well anyway
they were not the type holsters I needed but we all need to
create our own "or equal" model number list for our older
discontinued guns.
Reply With Quote
The Following 3 Users Like Post:
  #2  
Old 05-25-2010, 11:04 PM
Mike-4's Avatar
Mike-4 Mike-4 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Aug 2006
Posts: 398
Likes: 1,210
Liked 145 Times in 73 Posts
Default

Great tip. It's been frustrating finding a quality holster for my 1006. Thanks for the info.
Reply With Quote
  #3  
Old 05-26-2010, 09:23 AM
RobG5589's Avatar
RobG5589 RobG5589 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Apr 2010
Location: N. Commiefornia
Posts: 189
Likes: 3
Liked 34 Times in 20 Posts
Default

I used my Galco thumb snap made for my 220 for my 4506-1. While it fits well the thumbsnap does not connect. The barrel also sticks out of the end about an inch.

ETA: I have this one on the way for my 4506. Will report on it when it gets here.
http://www.officerstore.com/store/pr...ck_right_hand/

Last edited by RobG5589; 05-26-2010 at 12:48 PM.
Reply With Quote
  #4  
Old 05-26-2010, 12:35 PM
novalty's Avatar
novalty novalty is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: May 2009
Location: Southern Maine
Posts: 13,611
Likes: 491
Liked 1,883 Times in 987 Posts
Default

I am guessing that probably the "Commander" sized S&W 45's and 10mm's would also fit the same holsters.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 05-26-2010, 03:24 PM
preventec47 preventec47 is offline
Member
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 67
Likes: 0
Liked 7 Times in 5 Posts
Default

Quote:
Originally Posted by RobG5589 View Post
ETA: I have this one on the way for my 4506. Will report on it when it gets here.
OfficerStore.com: Safariland: Model 518 Paddle Holster for Pistols, Plain Black, Right Hand
=========
What size did you order and why did you pick that size ?

I think we have two considerations with holster fitment...
Stiffness rigidity and shape, and overall size.

I have some soft leather holsters that really serve more as
a pouch than a specifically boned and formed holster. These
holsters basically fit all my medium and full sized guns. It
is just that some of the guns fit deeper into them.

As regards highly formed leather and plastic or kydex holsters
for instance, shape very much matters.

I have a precision molded plastic holster for
1911 Govt models that when I try to slide my 4506 into,
only the barrel will insert. The trigger guard on 4506 and
1006 pistols are much wider than 1911 Govt models and
the trigger guards will prevent any further insertion.
Reply With Quote
  #6  
Old 05-26-2010, 05:46 PM
oldRoger oldRoger is offline
US Veteran
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Nov 2007
Location: Citrus County, Florida
Posts: 2,073
Likes: 21
Liked 218 Times in 110 Posts
Default

P220 holster and 4506/1006, The S&W is a bit thinner, but it is longer. So dependent upon the holster a 1006 will not fit in a holster made for a 220.
P220 holster and 1076/4566, these fit quite well.
I have a Milt Sparks for the 220, my 1006 will not fit into it well enough to use, it sticks out. Either my 1076 or 4566 fit OK just a mite loose.

Fit the other way is a no go the SIG will not fit into holsters made for the S&W that I have.

The dimensions of the 1911 are not enough similarto either the SIG or S&W for a fit with any of the above, unless you have a very sloppy holster.

My advice; try before you buy.
__________________
Ipsis Rebus Dictantitbus
Reply With Quote
The Following User Likes This Post:
  #7  
Old 05-27-2010, 12:31 PM
RobG5589's Avatar
RobG5589 RobG5589 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Apr 2010
Location: N. Commiefornia
Posts: 189
Likes: 3
Liked 34 Times in 20 Posts
Default

Quote:
Originally Posted by preventec47 View Post
=========
What size did you order and why did you pick that size ?
Size 25 as recommended for the 645/4506.
Reply With Quote
  #8  
Old 05-27-2010, 03:34 PM
preventec47 preventec47 is offline
Member
 
Join Date: Oct 2008
Location: Atlanta, GA
Posts: 67
Likes: 0
Liked 7 Times in 5 Posts
Default

I should have clarified that the three Hume holsters for the
Sig P220 and 226 were open bottomed holsters and while
the body of the SW Pistol seemed to fit snug, the barrel of
the 4506-1 did stick out the bottom an inch or so longer
than the SIG guns.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 05-31-2010, 06:54 PM
tinfinger tinfinger is offline
Member
 
Join Date: Jul 2005
Posts: 66
Likes: 0
Liked 3 Times in 2 Posts
Default

Thanks for the info. A RSR paddle holster (with the finger release lock) for a Sig 220 would not accept a 4566. However, a 511 kydex holster for the 220 does hold the 4566 tolerably well. Good enough for an IDPA match, I think.
Reply With Quote
  #10  
Old 12-11-2010, 12:24 AM
Green '01 Green '01 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Dec 2010
Location: Moncks Corner, SC
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

Found this made by Tagua at local gun shop. It's for an HK .45 Auto but fits the square trigger guard of the S&W 4506 like it was made for it and barrel protrudes only an inch or less. Only $34.00 at the gun shop.
Open Top Leather Belt Holster - Tagua Gun Leather | Gun Holsters, Leather Holsters, Pistol Holsters, Western Holsters, Shoulder Holsters, Glock Holsters.
Attached Images
File Type: jpg Tagua.jpg (4.3 KB, 180 views)
Reply With Quote
  #11  
Old 03-10-2011, 09:47 AM
cycotcskir cycotcskir is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2011
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default Holster that fits

I tried out the Sig 220/226 and it didn't fit my 4506-1 in the Blackhawk Serpa model.

The Sig 2022 concealment Serpa fit very well. It rocks forward and aft about 5 degrees, but locks in great.
Reply With Quote
  #12  
Old 03-10-2011, 10:14 AM
blueknight7 blueknight7 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Jun 2009
Location: Kansas
Posts: 127
Likes: 0
Liked 27 Times in 20 Posts
Default

The old trick is alot of holsters for the Beretta 92/96 fits 4506/1006reasonably well. Barrel and slide lenght and size is about right, trigger guard shape and size is close.

The biggest problem if you don't have the proper holster for the Gen. 3 large frame autos is, alot of their weight is north of the slide stop. This weapons system takes an 1 3/4" double layer, stiff, leather belt. The holster, unless a drop type, needs a tight fitting belt loop. Or, the gun seems to flop a bit, while is on your belt.

Try running when that event is going on. Man, it is distracting. When I was running with that beast, I wasn't doing it for exercise, either.
I have enough holsters to fit my 1026, so I don't have a problem. But, I was collecting holsters for it, 20+ years ago, too.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 03-10-2011, 11:11 AM
sniper47's Avatar
sniper47 sniper47 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Sep 2009
Location: Tucson
Posts: 983
Likes: 189
Liked 78 Times in 56 Posts
Default My holsters.

Belt slide holster-Galco Combat Master #292. Lists for an H&K USP, among others, but fits all 3rd gen autoloaders, both trigger guards. Safariland IWB #3s, w/thumbreak, lists for a Beretta 92/96. Fits perfectly and the thumbreak works too. I have always wanted a sticky thread listing cross-referenced holsters for our 3rd gens. Maybe some day.
Reply With Quote
  #14  
Old 03-10-2011, 03:49 PM
Broker50 Broker50 is offline
Member
 
Join Date: Jan 2008
Location: East Kentucky
Posts: 808
Likes: 247
Liked 189 Times in 102 Posts
Default

Bianchi used to list Beretta 92 holsters as the fit for the 5" S&W autos. I have a square triggerguard 4506, & a 1006 with the round trigger guard. Some Beretta 92 holsters need to be stretched a bit for the thumb snap to fit on the square trigger guard 4506. Open top holsters should be no problem.
Reply With Quote
  #15  
Old 03-10-2011, 07:16 PM
Gunhacker's Avatar
Gunhacker Gunhacker is offline
SWCA Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Oct 2002
Location: SF East Bay - "the delta"
Posts: 3,508
Likes: 1,585
Liked 4,495 Times in 1,516 Posts
Default

If the idea of an open top holster without the thumb safety strap doesn't bother you, this is the Safariland 568 "custom fit".

Retention tension is adjustable, it's semi-formed and works well with either my 4506-1 or 945PC gun.

__________________
Conrad
SWCA #1830 SWHF #222
Reply With Quote
The Following 4 Users Like Post:
  #16  
Old 06-13-2014, 01:48 PM
Warrior39 Warrior39 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2013
Location: Texas
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default Custom fitting the 4506

I used a Bianchi #5 (0613) for my square guard 45-06. I custom fit the 4506 by soaking the holster in a 50-50 solution of alcohol (rubbing!) and water until the leather was saturated. Crammed the gun (wrapped in kitchen plastic wrap) into the softened holster, working the leather around the various curves and trigger guard. Attached the strap and left overnight until dry. Finished up with a good coating of leather conditioner.
Reply With Quote
  #17  
Old 06-13-2014, 02:01 PM
loeman's Avatar
loeman loeman is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Apr 2013
Location: New Mexico
Posts: 2,637
Likes: 2,354
Liked 3,823 Times in 1,348 Posts
Default

Thanks for the original tip and all the ones that followed. I was having trouble finding a holster for my 4506 no dash with square trigger guard. I found a fantastic NOS Don Hume holster on the 'Bay. However it was built for and marked S&W Md 645. The leather is very stiff and nicely finished. The fit is tight but not too tight. It is a "pancake" style and is perfect for my needs.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 06-13-2014, 07:19 PM
JEG247 JEG247 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Nov 2012
Posts: 17
Likes: 1
Liked 3 Times in 3 Posts
Default

Fobus 220 holsters work great for the rounded 4506-1 trigger gaud models.
Reply With Quote
  #19  
Old 06-14-2014, 01:19 PM
1775usmarine 1775usmarine is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Nov 2013
Posts: 630
Likes: 292
Liked 573 Times in 249 Posts
Default

I have a blackhawk serpa holster i believe for the sig 226 and had to make a notch for the slide release for it to lock in place. It works great for my 4506-1 , 3913, and a 5906 I use to have.
Reply With Quote
  #20  
Old 07-02-2014, 08:30 PM
Mithrandir Mithrandir is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Jul 2014
Posts: 27
Likes: 16
Liked 38 Times in 16 Posts
Default

I bought a turkish made Shoulder rig intended for a B92.... actually fits very nicely!!

_4506_shoulder_rig.jpg
Reply With Quote
  #21  
Old 07-02-2014, 10:28 PM
Big Shrek's Avatar
Big Shrek Big Shrek is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2014
Location: NW Florida
Posts: 649
Likes: 4,977
Liked 710 Times in 362 Posts
Default

Quote:
Originally Posted by Gunhacker View Post
If the idea of an open top holster without the thumb safety strap doesn't bother you, this is the Safariland 568 "custom fit".

Retention tension is adjustable, it's semi-formed and works well with either my 4506-1 or 945PC gun.

Everytime I see one of those holsters without a strap or lock,
I think of that vid of the 4yr old kid shooting his dad in the chest at a wedding.
I gotta have a strap, or a SERPA retention...something...
__________________
Marlin & Calico Specialist
Reply With Quote
The Following 2 Users Like Post:
  #22  
Old 07-03-2014, 01:15 AM
Ascension Ascension is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2013
Location: Birmingham Alabama
Posts: 394
Likes: 290
Liked 361 Times in 163 Posts
Default

Quote:
Originally Posted by loeman View Post
Thanks for the original tip and all the ones that followed. I was having trouble finding a holster for my 4506 no dash with square trigger guard. I found a fantastic NOS Don Hume holster on the 'Bay. However it was built for and marked S&W Md 645. The leather is very stiff and nicely finished. The fit is tight but not too tight. It is a "pancake" style and is perfect for my needs.
From Hard to Find Holsters I take it? I own 2 both Humes from them and love um! One tan leather multi tilt for the 1066 and one H -726 that i carry the 910 and 4043 in.
All 3 of my Smiths are close enough in size that they will fit pretty well in both holsters.
hardtofindholsters on eBay
Reply With Quote
The Following User Likes This Post:
  #23  
Old 07-03-2014, 06:44 AM
loeman's Avatar
loeman loeman is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Apr 2013
Location: New Mexico
Posts: 2,637
Likes: 2,354
Liked 3,823 Times in 1,348 Posts
Default

Quote:
Originally Posted by Ascension View Post
From Hard to Find Holsters I take it? I own 2 both Humes from them and love um! One tan leather multi tilt for the 1066 and one H -726 that i carry the 910 and 4043 in.
All 3 of my Smiths are close enough in size that they will fit pretty well in both holsters.
hardtofindholsters on eBay
Yep, that's the guy (hardtofindholsters). I think I'll look to see if he has something for my 4516. I'm thinking that a holster for a 5906 will fit just fine.
Reply With Quote
  #24  
Old 07-03-2014, 03:18 PM
Ascension Ascension is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2013
Location: Birmingham Alabama
Posts: 394
Likes: 290
Liked 361 Times in 163 Posts
Default

Quote:
Originally Posted by loeman View Post
Yep, that's the guy (hardtofindholsters). I think I'll look to see if he has something for my 4516. I'm thinking that a holster for a 5906 will fit just fine.
If you need a level 3 duty style I have a really sharp brand new G and G Galaxy in gloss black for the 4566 and 1066. Wore it out only once .
Reply With Quote
The Following User Likes This Post:
  #25  
Old 07-03-2014, 03:44 PM
Arik Arik is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

Quote:
Originally Posted by Big Shrek View Post
Everytime I see one of those holsters without a strap or lock,
I think of that vid of the 4yr old kid shooting his dad in the chest at a wedding.
I gotta have a strap, or a SERPA retention...something...
Are you planning on having your kid grab at your stuff? Do you carry Mexican style?

If I find a video of a kid doing the same with a holster w/strap what would you buy then?
Reply With Quote
  #26  
Old 07-04-2014, 05:38 PM
Big Shrek's Avatar
Big Shrek Big Shrek is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Mar 2014
Location: NW Florida
Posts: 649
Likes: 4,977
Liked 710 Times in 362 Posts
Default

Quote:
Originally Posted by Arik View Post
Are you planning on having your kid grab at your stuff? Do you carry Mexican style?

If I find a video of a kid doing the same with a holster w/strap what would you buy then?
I've got 3-yr old twins, they grab EVERYTHING they can get their hands on...
however, daddy enters the home thru the mudroom, de-rucks & de-gears,
puts the bang bangs & pokey objects in the safe, then comes out to play

Current holster is this dang thang...definitely retains...



Kids are kids, even knowing Daddy would go Sgt. Turbo Ballistic if they touched his guns,
they're three...logic is NOT the largest factor in their operating system at this time...
so, you have to Overprotect 'em so they can survive long enough to receive/retain training
and learn the benefits of logical thinking.

And yeah, they've already been shown how to remove the mag from a Luger...
how to place the safety ON, and a few other things...but still...they're 3...
you can't trust 'em any father than you can throw an Abrams Tank.
__________________
Marlin & Calico Specialist

Last edited by Big Shrek; 07-04-2014 at 05:45 PM.
Reply With Quote
  #27  
Old 07-04-2014, 08:19 PM
Ross3914 Ross3914 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Aug 2012
Location: Virginia Beach, VA
Posts: 291
Likes: 54
Liked 294 Times in 142 Posts
Default

Many Sig P229 holsters will fit the S&W 457 .45 auto.
Reply With Quote
  #28  
Old 07-08-2014, 08:53 AM
prrii prrii is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Jul 2014
Posts: 1
Likes: 0
Liked 1 Time in 1 Post
Default

Figured I'd share. Just picked up a 4516-1, circa 1990 and popped it into a Galco Matrix for a Ruger P90. It's not a perfect fit and I don't know that I would use it for carrying out and about, but, it's a nice snug fit.

Fit well enough that the 20 year sales rep behind the counter was impressed and suprised.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 06-08-2015, 06:32 PM
tachi62 tachi62 is offline
Member
Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners Holster Trick for 4506 and 1006 owners  
Join Date: Sep 2010
Location: Florida
Posts: 14
Likes: 11
Liked 1 Time in 1 Post
Default

Gentlemen, I just got a S&W645 circa1987. I am a left handed shooter. I am a Security Officer in Florida, where the law changed adding the 40S&W and 45acp to the guns we can carry on duty. I had trouble with the Glock 21, but tried a friends 645 and loved it . Any ideas on holsters? Also, I have a old holster for smith &Wesson mod 59. I got it for a TZ 75 series 88 with a square trigger guard. I will try that and let you all know if it works. I have two 5906 , and need help finding a metal framed 40S&W. I had a glock 40S&W blow up next to me. Also, the new M&P kicks to hard. I am not sure what three or four digit guns to look for in 40S&W. I also carry a 39113 for CCW. Thank you in advance for any help you can offer.
Reply With Quote
Reply

Tags
1911, 4506, 4566, 645, beretta, bianchi, commander, galco, glock, idpa, kydex, leather, lock, safariland, sig arms

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
*SPF* Bianchi 19L-2 Holster 1006 4506 645 JCR575 Accessories/Misc - For Sale or Trade 3 12-26-2016 10:11 PM
Wanted 4506/1006 holster TZ BIG BOY WANTED to Buy 0 03-19-2016 06:55 PM
WTS: LH Bianchi X16 Agent Holster Only for S&W 4506/1006 $35 Shipped Dump1567 Accessories/Misc - For Sale or Trade 5 08-24-2011 10:28 PM
WTB Nice leather Shoulder holster for S&W 4506/1006 Big_gun WANTED to Buy 0 12-07-2010 12:40 AM
Paddle/Conceal holster for S&W 4506/1006 APG WANTED to Buy 0 10-02-2009 04:22 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:09 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)