Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Closed Thread
 
Thread Tools Display Modes
  #151  
Old 11-09-2011, 02:12 PM
Shadow1006's Avatar
Shadow1006 Shadow1006 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2007
Location: Southeast, LoUiSiAna
Posts: 686
Likes: 171
Liked 207 Times in 100 Posts
Default

I would worry that the repeated firing would hammer the barrel and damage the rifling or throat of the parent 10mm barrel. Then due to the very thin structure of the sleeve barrel it may become warped or distorted. Pressures of 10mm @ 37,500 psi and 357Sig @ 40,000psi and even the 9x25Dillon which doen't have a SAAMI rating maybe hitting the 42,000 to 44,000 psi levels...

I think I will just stay with the full barrel specific for the cartridge to work with, insuring full ballistic performance! I work at the upper limits of performance with the 10mm, 40S&W, 357Sig and 9x25Dillon, so the pressures and velocities would be my concerns usin a sleeve type unit... Remeber shotguns are lower pressure and smooth bore as compared to the percision rifled barrels.

BM1, has his hands full with the current orders and getting time on the CNC machines has possed challenges...
  #152  
Old 11-09-2011, 02:18 PM
Reloader Fred Reloader Fred is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Posts: 128
Likes: 0
Liked 21 Times in 9 Posts
Default

The difference, as I see it, is you're comparing a low pressure round (shotgun) to a high pressure round (357 Sig), but using the same basic concept for both.

The fit of the barrel liner would have to be so tight as to make it hard to install and remove. The difference between a .400" diameter bore and a .356" diameter bore is only .044", which means the maximum the barrel liner walls could be is .022", which doesn't leave any room for clearance between the inside diameter of the 10mm barrel and the outside diameter of the 357 Sig barrel.

The other problem is the shoulder of the case. Despite what you read about the 357 Sig round headspacing on the case mouth, there is the second datum point on the shoulder to consider. If the shoulder of the case contacts the shoulder of the chamber insert too soon, the slide will be held out of battery. At the opposite end, if the shoulder of the chamber is too far forward, the case shoulder will blow out to match the chamber. This probably wouldn't result in a case rupture, but brass fired in that chamber would be excessively worked and would fail prematurely, in my opinion.

The idea is novel, but I just think it's not applicable in this case.

Hope this helps.

Fred
  #153  
Old 11-09-2011, 04:18 PM
John3200 John3200 is offline
Member
 
Join Date: Oct 2005
Posts: 139
Likes: 2
Liked 15 Times in 11 Posts
Default

Yeah, I started to think the differences in bore diam. were way to thin after I wrote it. I think it would work if the bore size difference was greater. I don't have any idea how much different they would need to be.

Oh well, that's what I get for typing on my smart phone while eating my lunch. Too many ideas and not enough thought. Hehe.
  #154  
Old 12-26-2011, 07:11 PM
Shadow1006's Avatar
Shadow1006 Shadow1006 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2007
Location: Southeast, LoUiSiAna
Posts: 686
Likes: 171
Liked 207 Times in 100 Posts
Default

Bumped...Hope 2012 will provide BM1 time to move ahead with this project!
  #155  
Old 12-27-2011, 02:56 PM
cmr0323's Avatar
cmr0323 cmr0323 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2011
Location: Alabama
Posts: 118
Likes: 0
Liked 8 Times in 8 Posts
Default

Quote:
Originally Posted by Shadow1006 View Post
Bumped...Hope 2012 will provide BM1 time to move ahead with this project!
I'll second that!
  #156  
Old 12-29-2011, 03:36 PM
cmr0323's Avatar
cmr0323 cmr0323 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2011
Location: Alabama
Posts: 118
Likes: 0
Liked 8 Times in 8 Posts
Default Off Topic.

While we're waiting for production to start on the .40S&W/10mm conversion barrels, why not begin planning a .22TCM conversion for our 5906's, etc.

Happy holidays!

cmr
  #157  
Old 12-30-2011, 07:48 PM
bad_man_ one's Avatar
bad_man_ one bad_man_ one is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Feb 2006
Location: S&W is 45 minutes away
Posts: 652
Likes: 1
Liked 144 Times in 88 Posts
Default

Hey All,
I've been out of touch (State) for a while now.
Will "Git-er-Done" in 2012.

Best wishes for the New Year,
BM1
The Following User Likes This Post:
  #158  
Old 12-30-2011, 08:08 PM
Reloader Fred Reloader Fred is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Posts: 128
Likes: 0
Liked 21 Times in 9 Posts
Default

Sounds good.

Happy New Year,

Fred
  #159  
Old 01-04-2012, 08:10 PM
Screwball Screwball is online now
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

It's 2012... just playing.

Can't wait for the conversions. I just bought a 5-inch M&P40 Pro and a M&P40 Compact (first dedicated .40 pistols I've owned), but going to hold off on .357 SIG barrels until I get that for the 1006. Figured I'd try it out on one gun, and if I like the round, I'll pick up the M&P barrels afterwards.
  #160  
Old 05-07-2012, 05:38 PM
Screwball Screwball is online now
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

Any updates?
  #161  
Old 07-04-2012, 09:08 PM
slanto3000 slanto3000 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jan 2010
Location: Great White North
Posts: 13
Likes: 0
Liked 1 Time in 1 Post
Default

If you could ship these to Canada you could sell quite a few.
  #162  
Old 07-05-2012, 09:38 PM
bad_man_ one's Avatar
bad_man_ one bad_man_ one is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Feb 2006
Location: S&W is 45 minutes away
Posts: 652
Likes: 1
Liked 144 Times in 88 Posts
Default

Quote:
Originally Posted by Screwball View Post
Any updates?
It's still a work in progress, they are just sitting there waiting for some open machine time and me.
BUT,
It is all on hold for now, there are some different priorities in my life right now.
Keep the faith, they will get completed.
I have allot invested in this.
Regards,
BM1
  #163  
Old 07-06-2012, 12:19 AM
Mike-4's Avatar
Mike-4 Mike-4 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Aug 2006
Posts: 398
Likes: 1,210
Liked 145 Times in 73 Posts
Default

Thx BM1 for the update. We're waiting patiently.
  #164  
Old 07-07-2012, 09:44 AM
Screwball Screwball is online now
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Location: ME
Posts: 381
Likes: 62
Liked 445 Times in 167 Posts
Default

Quote:
Originally Posted by bad_man_ one View Post
It is all on hold for now, there are some different priorities in my life right now.
No problem.

I went through my emails just before that post, and saw the one I sent, so figured I'd bump up the thread. Hope everything is well.
  #165  
Old 07-10-2012, 02:43 AM
remat457 remat457 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2005
Location: Seattle, WA
Posts: 645
Likes: 7
Liked 52 Times in 39 Posts
Default

Quote:
Originally Posted by bad_man_ one View Post
It's still a work in progress, they are just sitting there waiting for some open machine time and me.
BUT,
It is all on hold for now, there are some different priorities in my life right now.
Keep the faith, they will get completed.
I have allot invested in this.
Regards,
BM1
Thanks for the update! No rush for me, the only bad thing is if my 10xx family grows Hope things are going well for you.
__________________
NRA Certified Instructor
  #166  
Old 07-10-2012, 08:45 PM
Shadow1006's Avatar
Shadow1006 Shadow1006 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2007
Location: Southeast, LoUiSiAna
Posts: 686
Likes: 171
Liked 207 Times in 100 Posts
Default



Holding on too!
  #167  
Old 07-10-2012, 11:30 PM
Fliplip Fliplip is offline
US Veteran
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Apr 2012
Location: Prince William Sound
Posts: 28
Likes: 1
Liked 4 Times in 3 Posts
Default Sounds Great

I need .40 and .357 Sig barrels for 1076 and 1006. Make them about $150 each and match quality and you'll sell a ton.
  #168  
Old 07-19-2012, 03:05 PM
haris1's Avatar
haris1 haris1 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Location: Ozark Mountains
Posts: 1,523
Likes: 358
Liked 1,050 Times in 283 Posts
Default 40 and 357 barrels

I would like 40 and 357 barrels to fit the 1006 and the 1066.Thats 4 barrels total
I would like option#2 and I will do final fitting . If they are 225 each, thats ok with me
please give me instructions on what info you neeed from me
or a link to your web site
Thanks
Haris
__________________
Gun Control= Using Both Hands
  #169  
Old 07-20-2012, 06:16 AM
bad_man_ one's Avatar
bad_man_ one bad_man_ one is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Feb 2006
Location: S&W is 45 minutes away
Posts: 652
Likes: 1
Liked 144 Times in 88 Posts
Default

Hello Harris1, et all,
All the barrels that are in process were all spoken for at the time.
Things have come to a halt due to personal issues.
115 barrels are in process and partially completed.
When I get back to working on them,
I will contact those folks that are on my list and see who are still interested in them
and your position on the waiting list will move up accordingly.
Sorry for the delay.

Regards,
BM1
  #170  
Old 09-27-2012, 10:55 AM
lamina1982 lamina1982 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: May 2010
Location: West Falls, NY
Posts: 9
Likes: 0
Liked 0 Times in 0 Posts
Default

Any chance any of these conversion barrels available or anymore being made?
  #171  
Old 09-27-2012, 12:59 PM
03Fatboy's Avatar
03Fatboy 03Fatboy is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Oct 2009
Location: Long Beach, CA
Posts: 1,386
Likes: 874
Liked 994 Times in 442 Posts
Default Put me on waiting list

A week or so ago, I sent an email and PM to be put on the waiting list for a 40 barrel for my 1006 should someone fall off the distribution list. I haven't heard a reply, but assume you got them. Thanks
  #172  
Old 11-14-2012, 10:49 PM
snowman.45 snowman.45 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: May 2004
Location: Buckeye, AZ, USA
Posts: 1,084
Likes: 10,329
Liked 1,324 Times in 487 Posts
Default

BM1: Just checking to see if I'm still on your list? I haven't heard anything for a very long time. Thanks.
__________________
Dave Frost
  #173  
Old 11-14-2012, 11:24 PM
mbliss57's Avatar
mbliss57 mbliss57 is offline
US Veteran
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jan 2012
Location: Desert South West
Posts: 5,540
Likes: 7,356
Liked 8,688 Times in 2,312 Posts
Default

I will pay $225 for a drop in .40 cal 5" barrel for a 1006 for a 4.25" for a 1076. I would also purchase a 4066 of I could drop in a 357Sig barrel.
__________________
John 1:17
NRA Life Benefactor
The Following User Likes This Post:
  #174  
Old 11-15-2012, 05:51 AM
broberts001's Avatar
broberts001 broberts001 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Dec 2006
Location: Houston Area
Posts: 319
Likes: 6
Liked 17 Times in 11 Posts
Default

BM1 is out of town at the moment, as of early Nov. He did not have an expected date of return.

-Bryan
  #175  
Old 02-12-2013, 06:59 PM
Elkins45 Elkins45 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Dec 2011
Location: Northern KY
Posts: 272
Likes: 75
Liked 314 Times in 97 Posts
Default

I just stumbled across this thread through a Google search. I would like a 40 barrel for my 1006 should production ever resume.
__________________
NRA Endowment Member
  #176  
Old 02-13-2013, 12:32 AM
bgrone bgrone is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Dec 2012
Location: Iowa, West Central
Posts: 971
Likes: 4,086
Liked 1,050 Times in 441 Posts
Default barrel conversions

Just stumbled on this too, I would be interested in a 9x25 dillon conversion for my 4006TSW of my 1006
  #177  
Old 07-08-2014, 12:08 AM
Karatedog Karatedog is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jul 2014
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default 40 S&W barrel for S&W 1006

I know this is an old thread but does anyone know where I might find a 40 S&W barrel for my newly acquired S&W 1006. I just recently learned about the S&W Gen III's and I think they are the cat's meow!
  #178  
Old 07-08-2014, 03:26 PM
HCH HCH is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jan 2012
Location: Hancock County Ohio
Posts: 710
Likes: 2,507
Liked 525 Times in 235 Posts
Default

Whenever this thread gets a bump, I get interested in a .357 Sig 4006 barrel. So what's up? Are they available yet?
The Following User Likes This Post:
  #179  
Old 07-08-2014, 03:53 PM
cpeblue cpeblue is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: May 2011
Location: to close to Chicago
Posts: 676
Likes: 622
Liked 402 Times in 218 Posts
Default

Quote:
Originally Posted by HCH View Post
Whenever this thread gets a bump, I get interested in a .357 Sig 4006 barrel. So what's up? Are they available yet?
If it ever happens let me know. I do think this is just a pink Unicorn . That is one nice caliber that I would jump on for my 4006tsw but I'll just have to be content with the P229.
  #180  
Old 07-23-2014, 08:25 PM
Poohgyrr's Avatar
Poohgyrr Poohgyrr is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Feb 2003
Location: Retired to South Carolina
Posts: 868
Likes: 2,548
Liked 231 Times in 119 Posts
Default

Quote:
Originally Posted by cpeblue View Post
That is one nice caliber that I would jump on for my
357Sig needed for a 4006 here.
__________________
July 4, 1776 not Jan 30, 1909
  #181  
Old 07-23-2014, 08:43 PM
cpeblue cpeblue is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: May 2011
Location: to close to Chicago
Posts: 676
Likes: 622
Liked 402 Times in 218 Posts
Default

Quote:
Originally Posted by Poohgyrr View Post
357Sig needed for a 4006 here.
You got me excited , but I see it's just a false alarm.......
  #182  
Old 07-26-2014, 12:28 PM
Yorkie Man Yorkie Man is offline
Member
 
Join Date: Sep 2008
Posts: 562
Likes: 4
Liked 260 Times in 134 Posts
Default

I would like a 357 Sig barrel for a 4006 if you get around to making them.
  #183  
Old 01-19-2015, 11:00 PM
LT_STREET LT_STREET is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jan 2015
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

Count me in for a drop-in .40 for my 1006.
  #184  
Old 01-19-2015, 11:09 PM
haris1's Avatar
haris1 haris1 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jun 2009
Location: Ozark Mountains
Posts: 1,523
Likes: 358
Liked 1,050 Times in 283 Posts
Default

Quote:
Originally Posted by bad_man_ one View Post
Hello Harris1, et all,
All the barrels that are in process were all spoken for at the time.
Things have come to a halt due to personal issues.
115 barrels are in process and partially completed.
When I get back to working on them,
I will contact those folks that are on my list and see who are still interested in them
and your position on the waiting list will move up accordingly.
Sorry for the delay.

Regards,
BM1
As this was written in July 2012, I dont think BM1 is back into the project. Please dont stir the pot as if and when he is ready he will announce it here on the forum. Lets all hope and pray that his personal issues work out to his satisfaction

Haris1
__________________
Gun Control= Using Both Hands
The Following User Likes This Post:
  #185  
Old 01-20-2015, 12:14 AM
Garintheair Garintheair is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jul 2013
Posts: 141
Likes: 201
Liked 85 Times in 42 Posts
Default

Quote:
Originally Posted by bad_man_ one View Post
Anyone interested ?

Many of you know me through this great forum and that I have been heavily involved with the .356 TSW cartridge.
Posting the many conversions that I have worked with, having great success and enjoying the testing and evaluation of this great round.

6906 in .356 TSW, Marlin Camp-9/.356 TSW, New Project - Ruger PC4/.357 SIG

Making .356 TSW from other cartridges? - PROBLEM SOLVED

356 TSW Reloads

Anyone want to turn a standard 9 m.m. into a .356 TSW ?

.356TSW brass - Group buy?

WTB - S&W 6906 barrel P/N 236940000 - (Found One)

Model 3566 - 356TSW - Hope I did the right thing here?

My retirement from Aerospace Machining with 30+ years experience in many, many types of manufacturing processes has benefited me a great deal in my “odd” endeavors.

I am now contemplating the development and manufacturing of drop-in/semi-drop-in replacement barrels for all of us that have been thinking how nice it would be to have the advantages of shooting the .40 S&W and .357 SIG from out 10XX series handguns.
The first “Test Run” would probably be a lot size of 25-50 of each barrel (depending on the demand?) to accommodate the two different calibers in the two different barrel lengths, 5.00” and 4.25” with retrospect to the 1006, 1026, 1046 and the 1066, 1076 and 1086.

Wolff Gun Springs has a variety of replacement springs to taylor the recoil impulse and brass ejection to your liking.

Wolff lists the stock spring for the 1006, 1026 and 1046 @ 18#’s
They show 14, 15, 16, 17, 18, 20, 22 and 24#’s

Also the stock spring for the 1066, 1076 and 1086 @ 17#’s
They show 14, 16, 17, 18, 19, 20, and 22#’s

I am hoping to start the development after the first of the year.

If this dream works out I would like to expand to the 4013 style and 40XX series with .357 SIG barrels.
But that would be a little ways away at this point.

Any and all feedback would be greatly appreciated.

Regards,
BM1
I would be interested in a .40 cal for 1076 also.
  #186  
Old 01-27-2015, 08:09 PM
MikeyII MikeyII is offline
Member
 
Join Date: May 2008
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I would love a 357 barrel for my 4006.
  #187  
Old 01-27-2015, 08:17 PM
Charlie Foxtrott Charlie Foxtrott is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Oct 2009
Posts: 1,199
Likes: 775
Liked 1,961 Times in 690 Posts
Default When I decide that I need to fire a round that performs less well.

Than the one that my 1006s and my1066 were made to fire. I will be sure to get in touch with you.
  #188  
Old 05-19-2016, 10:17 PM
Ronbo03 Ronbo03 is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Apr 2013
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

I would be interested in a barrel for my 1026 in 9mm or .357
  #189  
Old 10-27-2017, 06:48 AM
smith46wesson's Avatar
smith46wesson smith46wesson is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Nov 2015
Location: Hanover, PA
Posts: 131
Likes: 38
Liked 66 Times in 40 Posts
Default

How did this ever work out? I've been reading about the 4013/4053 conversion to 10mm and I am intrigued.
The Following User Likes This Post:
  #190  
Old 10-27-2017, 07:55 AM
epj's Avatar
epj epj is offline
US Veteran
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,481
Likes: 227
Liked 2,397 Times in 1,081 Posts
Default

I don’t think this project ever really got going.
  #191  
Old 03-29-2018, 09:56 PM
Big Shrek's Avatar
Big Shrek Big Shrek is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2014
Location: NW Florida
Posts: 649
Likes: 4,977
Liked 710 Times in 362 Posts
Default

Quote:
Originally Posted by smith46wesson View Post
How did this ever work out? I've been reading about the 4013/4053 conversion to 10mm and I am intrigued.
I was wondering the same thing :O)
__________________
Marlin & Calico Specialist
  #192  
Old 03-29-2018, 10:13 PM
Sevens Sevens is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Mar 2015
Location: Ohio
Posts: 7,822
Likes: 9,389
Liked 14,736 Times in 5,022 Posts
Default

How about we tie a big fat padlock on this dumb thread rather than seeing it reappear every year with not even one molecule of new information?
The Following User Likes This Post:
  #193  
Old 03-29-2018, 10:18 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,906
Likes: 41,494
Liked 29,147 Times in 13,778 Posts
Default Good luck.....

I like anything that keeps third gens shooting.
__________________
"He was kinda funny lookin'"
  #194  
Old 03-30-2018, 01:23 AM
HCH HCH is offline
Member
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Jan 2012
Location: Hancock County Ohio
Posts: 710
Likes: 2,507
Liked 525 Times in 235 Posts
Default

Quote:
Originally Posted by Badkarma 1 View Post
Hey BM1, I would definetly be interested! I have a 4006 and wouldn't mind "spicing it up" so to speak with a .357 SIG barrel!
So when you get this project up and running I'd appreciate a PM.
Happy Holidays, Dale
Dittos on the .357 Sig and 4006
  #195  
Old 03-30-2018, 05:11 AM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels ATTN. 10XX Auto Owners, Production Has Started - .40 S&W & .357 SIG Barrels  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,473
Likes: 8,386
Liked 17,058 Times in 5,593 Posts
Default

Although the OP checks in here occasionally, he has not posted anything since 2015, so consider this idea dead. If something changes, he can contact one of the mods to reopen this thread or start a new one.

Sorry to all those with hopes of seeing this turn into something.
__________________
So many S&W's, so few funds!!
The Following 4 Users Like Post:
Closed Thread

Tags
1911, 223, 22lr, 4013, 4506, 6906, cartridge, engraved, glock, gunsmith, idpa, ipsc, lock, model 625, ruger, russian, s&w, scope, sig arms, sile, silvertips, skeet, smith and wesson, smith-wessonforum.com, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATTN Shockwave owners looking for covert case BloodyThumb Firearms & Knives: Other Brands & General Gun Topics 3 04-20-2017 05:25 PM
ATTN owners of Taurus pistols. amcline82 Firearms & Knives: Other Brands & General Gun Topics 3 03-29-2016 03:07 PM
Attn. Shield owners. The answer to you prayers is here! DeeBee Smith & Wesson M&P Pistols 28 08-12-2013 11:12 PM
"SOLD" ATTN. Model 1917, 25 & 25-2 Revolver Owners. New .45 Remington Auto-Rim Brass Hammerdown Accessories/Misc - For Sale or Trade 3 11-20-2009 10:01 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:54 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)