|
|
09-12-2010, 09:06 AM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 45
Likes: 1
Liked 1 Time in 1 Post
|
|
Shooting .40 in a 1066
I have a 1066 coming in next week. Is it possible to just drop in a .40 barrel into the gun to shoot that caliber? Does the magazine have to be changed? Any help from someone who has tried this is appreciated.
|
09-12-2010, 09:17 AM
|
Member
|
|
|
Join Date: Jan 2005
Location: IL
Posts: 1,205
Likes: 9
Liked 674 Times in 272 Posts
|
|
I HAVE A FRIEND OF MINE WHO DID NOTHING BUT LOAD THE 40 INTO THE MAGS AND FIRE AWAY. HE DOES HAVE AND FAILURE TO FEED EVERY NOW AND THAN FROM THE WAY THE AMMO MOVES FORWARD AND BACKWARDS IN THE MAG. THE GUN RUNS BETTER ON THE HEAVIER 180GR AMMO . JP
|
09-12-2010, 09:33 AM
|
Junior Member
|
|
|
Join Date: Jun 2009
Location: Stinking Ohio for now.
Posts: 140
Likes: 218
Liked 55 Times in 24 Posts
|
|
Most people I know advise not to do this as only the extractor is holding the round when the firing pin hits the primer and it's hard on the extractor. Don't know if anyone has blown their pistols up that I have heard of, but it is hard on the extractor.
|
09-12-2010, 09:35 AM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 45
Likes: 1
Liked 1 Time in 1 Post
|
|
Midway sells factory .40 barrels for the 1066, anyone try just dropping in a different barrel? I can do the same on my Sigs switching between .40 and .357
|
09-12-2010, 11:52 AM
|
Member
|
|
|
Join Date: Dec 2003
Location: SE Iowa on the Mississipp
Posts: 3,137
Likes: 1
Liked 352 Times in 230 Posts
|
|
If Midway has the barrels then that is the way to go. BarSto made a few years ago, but I have not seen any for 3rd gen S&Ws' for a long time. You would probably need a 1# or 2# lighter recoil spring, factory mags will usually work.
|
09-12-2010, 12:15 PM
|
Member
|
|
|
Join Date: May 2004
Location: Buckeye, AZ, USA
Posts: 1,085
Likes: 10,373
Liked 1,324 Times in 487 Posts
|
|
.40 barrel for the 1066
I've been looking for a .40 barrel for my 1066 for some time. Others I have spoken with were not aware that S&W had such a conversion barrel. When I saw this post, I went to the Midway website and found that they do list a common barrel for the 1066 and .40 caliber pistols in .40; guess I'll just get one and see.
__________________
Dave Frost
|
09-12-2010, 07:22 PM
|
|
Member
|
|
|
Join Date: Jan 2009
Location: CT
Posts: 110
Likes: 0
Liked 10 Times in 4 Posts
|
|
I would double check that listing at Midway. They list the barrel under the 1066, which of course is 10mm, and say that it also fits a 4003 and 4004. Dont think I'd like to try that! LOL!
I know for a fact that a barrel from a .40 cal 3rd generation wont fit my 1086. I tried....
I dont think any one currently makes a 40 cal barrel for the 10mms. Barsto used to. I've been trying to locate one for a long time with no luck.......
|
09-12-2010, 07:34 PM
|
Member
|
|
|
Join Date: May 2003
Location: No. Florida
Posts: 198
Likes: 8
Liked 19 Times in 11 Posts
|
|
I don't believe S&W made a conversion barrel for the 10mm 10XX series pistols for the .40; I asked several years ago and was told "no". I think the only afermarket barrel maker that did make a conversion barrel was Barsto, and maybe Jarvis.
Last edited by Big Mike; 09-12-2010 at 07:36 PM.
|
09-12-2010, 07:54 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: S&W is 45 minutes away
Posts: 652
Likes: 1
Liked 144 Times in 88 Posts
|
|
Smith & Wesson .40 will not fit in 1066, 1076, 1086
I just checked a 1066, 1076 and 1086,
The .40 Smith & Wesson barrel has a smaller hood than the 1066, 1076, 1086.
Also the .40 barrels are a little shorter.
I did not field strip any of them, but the visual says no.
If there is a way to get a .40 Smith & Wesson barrel to fit, please let me know.
I would love to get a couple/few.
All my numbers say it isn't going to happen.
Regards,
BM1
|
09-12-2010, 08:15 PM
|
Member
|
|
|
Join Date: May 2004
Location: Buckeye, AZ, USA
Posts: 1,085
Likes: 10,373
Liked 1,324 Times in 487 Posts
|
|
Thanks for the information, guys. I was afraid it was too good to be true. I was skeptical before I saw it on the Midway site. I placed an order for a 4003/4006 barrel for my 1066, but just cancelled it a few minutes ago.
__________________
Dave Frost
|
09-13-2010, 07:49 PM
|
|
Member
|
|
|
Join Date: Jan 2009
Location: CT
Posts: 110
Likes: 0
Liked 10 Times in 4 Posts
|
|
ill tell you what i tried awhile back. i made a sleeve, and i forgot the dimensions, to press into my extra 10mm barrel. it was the difference between a 10mm and .40 cartridge. a lite press fit into the chamber and was able to fire .40's outta my 10mm barrel no problem. I'll see if i cant find the link to it.......
Here it is! 1086 barrel
Last edited by 2003flht; 09-13-2010 at 08:02 PM.
|
09-13-2010, 10:00 PM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 45
Likes: 1
Liked 1 Time in 1 Post
|
|
I called S&W today, they had spoken to Midway and confirmed that the barrel on the website should not list the 1066, it was a mistake. Sorry to get everyone excited.
|
09-14-2010, 08:53 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,482
Likes: 228
Liked 2,397 Times in 1,081 Posts
|
|
I simply load 10mm in three power levels, the lowest approximating .40 S&W. It would be nice to be able to use cheap, plentiful .40 brass. I had given some thought to the same proceedure. Maybe someone in the gunsmithing or machine shop business could offer this service or converted barrels. There probably aren't that many service barrels still in existance. Are the 10XX barrels fitted at all. or are they manufactured as "drop in" parts?
|
09-14-2010, 05:43 PM
|
Member
|
|
|
Join Date: Jun 2009
Location: ME
Posts: 382
Likes: 62
Liked 446 Times in 168 Posts
|
|
Does S&W still make 10mm barrels? If something happens to the barrel for my 1006, they should be able to sell a replacement, correct?
I would see if you could buy one that was not reamed yet... and then have someone ream it out for the .40. Pay the same price for the standard barrel, but just have them skip one step.
Or am I grasping at straws?
|
09-14-2010, 07:17 PM
|
|
Member
|
|
|
Join Date: Aug 2005
Posts: 851
Likes: 54
Liked 187 Times in 75 Posts
|
|
I know folks have approached Bar-Sto about re-making the .40 conversion barrel and received "no" for an answer; but, has anyone asked S&W? It seems it would be very easy for them to do it.
__________________
N.R.A. BENEFACTOR Member
|
02-16-2011, 09:18 AM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: S&W is 45 minutes away
Posts: 652
Likes: 1
Liked 144 Times in 88 Posts
|
|
.40 barrels for 10XX's
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
My 1066
|
Ascension |
Smith & Wesson Semi-Auto Pistols |
16 |
03-26-2014 09:31 PM |
1066
|
warhorse302 |
Smith & Wesson Semi-Auto Pistols |
14 |
07-02-2013 12:18 PM |
WTS S&W 1066 FL
|
Big_gun |
GUNS - For Sale or Trade |
3 |
08-20-2012 09:39 PM |
WTT 1066
|
dutch686 |
GUNS - For Sale or Trade |
3 |
10-30-2010 09:48 PM |
1066 shooting low
|
A320graham |
S&W-Smithing |
3 |
09-20-2010 03:01 PM |
|