Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Reply
 
Thread Tools Display Modes
  #1  
Old 12-01-2011, 02:11 PM
bushface bushface is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Mar 2010
Location: Western North Carolina
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default accuracy of my 4516-1

I bought a S&W 4516-1. Went to a gun range and shot 21 rounds at 15 yards. Worked perfectly except at 15 yards, it was hitting about 2 to 1/2 feet (yes feet) down. I know that I am not a great shot but I am a lot better than that. The gun does not appear to have been shot much and no appearant damage. Showed it to a friend of mine that know guns much better that me. He said that the gun has not been fired much because know wear points showed no wear.

It has fixed sights.

What would you do?
Reply With Quote
  #2  
Old 12-01-2011, 02:22 PM
Fastbolt's Avatar
Fastbolt Fastbolt is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Jul 2002
Location: CA Central Coast
Posts: 4,638
Likes: 914
Liked 6,591 Times in 2,191 Posts
Default

The significant amount of times that one of our folks has brought a pistol to me, claiming it was consistently shooting low, I've tried the gun and found it's shooting fine with regard to POA/POI.

What I've found is the shooter was experiencing anticipatory flinch and depressing the muzzle, causing the hits to cluster lower than he/she thought they were aiming. (At the moment of anticipating the recoil they lost focus on their sights, and couldn't see they were actually shooting low.)

A session with some dummy rounds randomly loaded into their magazine (so they didn't know when they would be chambered) allowed them to see for themselves how they were pushing the muzzle down just at the moment they expected the gun to fire & recoil in their hand, which they didn't notice when they were shooting live rounds.

The first thing you might do is find an experienced shooter to try your 4516-1. Or, you might find an experienced instructor to try the gun, and then spend some time working with you to identify and correct any issues you may be experiencing when it comes to your technique.

If it turns out that the gun is really shooting that low at that distance, then the front sight might require replacement ... but first the shooter influence probably ought to be eliminated (as it's not an uncommon issue to encounter).

Just my thoughts.
__________________
Ret LE Firearms inst & armorer

Last edited by Fastbolt; 12-01-2011 at 02:29 PM.
Reply With Quote
  #3  
Old 12-01-2011, 02:23 PM
novalty's Avatar
novalty novalty is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: May 2009
Location: Southern Maine
Posts: 13,611
Likes: 491
Liked 1,883 Times in 987 Posts
Default

I had a 4566TSW, shot low for me, and 2 other people who tried it--one being an experienced shooter. I contacted S&W and they sent pre-paid label and replaced the front sight with a shorter one. It was better then I got it back, but I still had accuracy issues with the gun. Either the grip angle, gun itself, or me--but it wasn't the gun for me, as I couldn't get better than buckshot accuracy out of it.

You might try adding a set of Hogue grips to fit your hand better.

Last edited by novalty; 12-01-2011 at 03:16 PM.
Reply With Quote
  #4  
Old 12-01-2011, 03:08 PM
bushface bushface is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Mar 2010
Location: Western North Carolina
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default

To Fastbolt

I am a experience shooter with revolers, I have S&W 686 (357 mag) with 4" and 7" barrels. 617 (22LR) with 8 3/8" barrel and a 640 (SW640 shooting 230 grain and upto a 345 grain) with a 8 3/8" barrel. With my 686 4" barrel I have no problem at 25 yards and being max of 4" from the center of target and better with my longer barrels. I understand what and why you said what you wrote. What else would you suggest?
Reply With Quote
  #5  
Old 12-01-2011, 03:18 PM
Fastbolt's Avatar
Fastbolt Fastbolt is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Jul 2002
Location: CA Central Coast
Posts: 4,638
Likes: 914
Liked 6,591 Times in 2,191 Posts
Default

Quote:
Originally Posted by bushface View Post
To Fastbolt

I am a experience shooter with revolers, I have S&W 686 (357 mag) with 4" and 7" barrels. 617 (22LR) with 8 3/8" barrel and a 640 (SW640 shooting 230 grain and upto a 345 grain) with a 8 3/8" barrel. With my 686 4" barrel I have no problem at 25 yards and being max of 4" from the center of target and better with my longer barrels. I understand what and why you said what you wrote. What else would you suggest?
If you're an experienced shooter, including with with pistols (since the cycling slide gives a different "feel" than when shooting a revolver), then I'd consider calling S&W to ask about having a shorter front sight post installed to raise the POI (as novalty related). They make a number of different height front posts for the 3rd gen .45's.
__________________
Ret LE Firearms inst & armorer
Reply With Quote
  #6  
Old 12-01-2011, 03:21 PM
Fastbolt's Avatar
Fastbolt Fastbolt is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Jul 2002
Location: CA Central Coast
Posts: 4,638
Likes: 914
Liked 6,591 Times in 2,191 Posts
Default

Of course, you also need to realize you're not going to get the same crisp 3-3 1/2 lb trigger pull with the 4516-1 in SA mode as you're probably getting with your 686 in SA mode, and that may have some influence, as well.
__________________
Ret LE Firearms inst & armorer
Reply With Quote
  #7  
Old 12-01-2011, 04:36 PM
zorro49's Avatar
zorro49 zorro49 is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Apr 2008
Location: Lexington, SC
Posts: 137
Likes: 1
Liked 2 Times in 2 Posts
Cool

What Fastbolt has stated certainly makes sense, but what I would do is shoot from a rest at same distance(15yds) and see if that makes any difference. Also, I find that most indoor ranges are not set up to hang the target for folks over 6'2" to shoot on a level plain of aim to target. What I am saying is that you may have to actually point the pistol down slightly to hit center of target if shooting at silhouette target. Also try shooting at top of target(head if silhouette target) and see if that improves. Sounds fishy I know but if you are using isoceles stance then your point of aim is lowered and it is not a perfect straight line to target, so your are shooting down which can play on your eyesight point of aim. I don't have scientific proof of this theory so this is my own perception of what happens to me when shooting at indoor range I shoot at...zorro49
Reply With Quote
  #8  
Old 12-01-2011, 04:56 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

I'm a revolver guy too. When I first shot my 4516 I didn't think it was that accurate a handgun.

Then I put a set of Hogue grips on it and stopped using WWB in it. That, and a bunch of practice, made a vast difference.

It is a little tack driver, especially with Winchester Ranger 230 grain. I just need to shoot it regularly to take advantage of it. Good luck! Regards 18DAI
Reply With Quote
The Following User Likes This Post:
  #9  
Old 12-01-2011, 07:09 PM
Denver Dick's Avatar
Denver Dick Denver Dick is offline
US Veteran
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Jan 2007
Location: Ventura County, CA
Posts: 1,264
Likes: 197
Liked 797 Times in 282 Posts
Default

S&W 3rd generation pistols take some getting use to. I now have 19 of them (including a 4516-1 and -2). I also have 8 or 9 S&W revolvers (.38, .357 mag and .44 mag). Because of the triggers and grips, 3rd gens are very different, especially 3rd gen compact models. No one is doubting your experience with revolvers . . . or even with other autos. But, like I said, 3rd gens are different. FWIW

Good luck.
__________________
1st Signal Brigade, RVN '70
Reply With Quote
  #10  
Old 12-01-2011, 07:38 PM
Silversmok3's Avatar
Silversmok3 Silversmok3 is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: May 2011
Location: Western South Dakota
Posts: 560
Likes: 9
Liked 385 Times in 139 Posts
Default

In my hands, the 4506 I had was extremely intolerant of grip error.IF I took my time with my shots, like 30 seconds a shot, I could put the round where I wanted. Any attempt at speed drawing merely established my target as the safest place to bet I wouldn't hit.

I traded it when it dawned on me that the grip was too wide and the ammo to expensive for me to shoot well enough to get past the training curve with it. My 5906 by contrast is a blast to shoot. Pun intended. I could hit the target blind with that thing...go figure.
Reply With Quote
  #11  
Old 12-01-2011, 09:18 PM
heekma heekma is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Nov 2011
Location: Hawkeye turned Longhorn
Posts: 152
Likes: 1
Liked 22 Times in 13 Posts
Default

I'm inclined to agree with fastbolt as well.

Another thing to bear in mind-shorter barreled guns with abbreviated grips are just plain difficult to shoot well-unless you're a fairly experienced shooter. Due to the shorter barrel and grip, every single bad habit is magnified as are even very small inconsistencies with regard to grip, sight alignment, trigger control and trigger reset.

Try it at 15 yards shooting on a bench with bags before assuming the gun is the issue-no offense intended by any means. I'm a pretty fair shot with full-sized pistols, but the shorter and smaller the pistol gets, the more my meager skills are put on display.

Best,

Heekma
Reply With Quote
  #12  
Old 12-02-2011, 08:46 AM
novalty's Avatar
novalty novalty is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: May 2009
Location: Southern Maine
Posts: 13,611
Likes: 491
Liked 1,883 Times in 987 Posts
Default

Quote:
Originally Posted by Silversmok3 View Post
In my hands, the 4506 I had was extremely intolerant of grip error.IF I took my time with my shots, like 30 seconds a shot, I could put the round where I wanted. Any attempt at speed drawing merely established my target as the safest place to bet I wouldn't hit.

I traded it when it dawned on me that the grip was too wide and the ammo to expensive for me to shoot well enough to get past the training curve with it. My 5906 by contrast is a blast to shoot. Pun intended. I could hit the target blind with that thing...go figure.
Looks like we have the exact same shooting experience, just had mine with a 4566TSW instead of a 4506. I sold off my S&W 3rd Gen 45 to fund a S&W 1911. Right out of the box I was shooting as well as my 5906, the 1911 has restored my confidence level in shooting .45's enough so that I could hit 6" steel plates at 30 yards--and I'm not that experienced a shooter or typically very accurate. Just wish the 1911 field-stripped as easily as the 3rd Gen Smiths. Looking back I don't regret selling off the 4566TSW, but I still love the looks of the 3rd Gen S&W .45's just wish the ergonomics worked out better for me.

Last edited by novalty; 12-02-2011 at 08:49 AM.
Reply With Quote
  #13  
Old 12-02-2011, 10:35 AM
XPman XPman is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Feb 2008
Location: Southern Tenn.
Posts: 89
Likes: 1
Liked 6 Times in 3 Posts
Default

Which sight picture does S&W use with their semi-autos..???



I know some use the bottom dead on hold or cover up hold, which I don't like... I like the top center mass hold... That could explain a low shooting problem... I think H&K may use the bottom cover up hold...
Have a good one...XPman...
Reply With Quote
  #14  
Old 12-02-2011, 12:26 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

I use the top one, "center mass hold". Works well with all my S&W 45's using Winchester Ranger 230 grain. Regards 18DAI
Reply With Quote
  #15  
Old 12-02-2011, 01:24 PM
XPman XPman is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Feb 2008
Location: Southern Tenn.
Posts: 89
Likes: 1
Liked 6 Times in 3 Posts
Default

/\ ok, so the Smiths are set up for center mass right...??? That's also what I like, just didn't know which the S&W auto loaders were set up for...
Thanks and have a good one...XPman...
Reply With Quote
  #16  
Old 12-02-2011, 03:34 PM
John3200 John3200 is offline
Member
 
Join Date: Oct 2005
Posts: 139
Likes: 2
Liked 15 Times in 11 Posts
Default

Quote:
Originally Posted by XPman View Post
Which sight picture does S&W use with their semi-autos..???



I know some use the bottom dead on hold or cover up hold, which I don't like... I like the top center mass hold... That could explain a low shooting problem... I think H&K may use the bottom cover up hold...
Have a good one...XPman...
Other than your example of center mass, I don't see how your example is applicable to sight setup because those other sighting options are so target size and distance dependent. For instance, how do you use a 6oclock hold on a deer? I think your example is what happens when some takes a class and is shown a technique for a specific situation an misinterpret it to be a general technique. Bullseye target competitors may use a 6ocklock hold but their sights are adjustable and set for a specific target size at a specific range. Not a technique to use for any other situation.
Reply With Quote
  #17  
Old 12-02-2011, 10:08 PM
BruceB's Avatar
BruceB BruceB is offline
US Veteran
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Sep 2009
Location: Des Moines WA
Posts: 909
Likes: 357
Liked 592 Times in 286 Posts
Default

Quote:
Originally Posted by John3200 View Post
Other than your example of center mass, I don't see how your example is applicable to sight setup because those other sighting options are so target size and distance dependent. For instance, how do you use a 6oclock hold on a deer? I think your example is what happens when some takes a class and is shown a technique for a specific situation an misinterpret it to be a general technique. Bullseye target competitors may use a 6ocklock hold but their sights are adjustable and set for a specific target size at a specific range. Not a technique to use for any other situation.
I completely agree with this, it's very target size and distance dependent.

However, I spent years punching paper with rifles and pistols with adjustable sights, and it's very difficult for me to train my reactions and muscle memory to do something else. I have learned that all the 3rd gens with fixed sights will shoot low with any kind of six o'clock hold, so I have to modify my sight picture.

The real problem I have with any slow-ish aimed firing at bigger targets like silhouettes, is that the aiming point is so danged large, it easy to make groups that look like the pistol is inaccurate. Trying to figure out where in that big target area to cover with the front dot is difficult if you have to think about it, there is no solid reference point.

But, if I stick a 1" flourescent dot in the middle of the center mass portion of the target, my groups magically shrink to very acceptable accuracy levels. It's the old adage about "aim small, hit small".

When doing tactical drills with fast shooting, I have no problem sticking that front sight on the proper place to get top scoring hits. We're not looking for 1" groups.
Reply With Quote
  #18  
Old 12-02-2011, 10:52 PM
XPman XPman is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Feb 2008
Location: Southern Tenn.
Posts: 89
Likes: 1
Liked 6 Times in 3 Posts
Default

Quote:
Originally Posted by John3200 View Post
Other than your example of center mass, I don't see how your example is applicable to sight setup because those other sighting options are so target size and distance dependent. For instance, how do you use a 6oclock hold on a deer? I think your example is what happens when some takes a class and is shown a technique for a specific situation an misinterpret it to be a general technique. Bullseye target competitors may use a 6ocklock hold but their sights are adjustable and set for a specific target size at a specific range. Not a technique to use for any other situation.
Oh, I agree 100%, I was just askin how S&W semi-auto sights (fixed) were set up from the factory, as I understand H&K's fixed are like the bottom one, cover up hold, and I don't like that either for the same reasons you state...
I have 3 S&W revolvers and only 1, my Mod. 29 Silhouette .44M has adj. sights... I have been shootin mostly my single shot custom XP-100s with 24x scopes...
I just want to try a different game and shoot some semi-auto for fun...
Have a good one...XPman...

Last edited by XPman; 12-03-2011 at 09:11 PM.
Reply With Quote
  #19  
Old 03-03-2012, 10:55 PM
1911heaven's Avatar
1911heaven 1911heaven is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: Feb 2011
Location: Loganville,Georgia
Posts: 103
Likes: 5
Liked 17 Times in 6 Posts
Default

Accuracy from a 3-3/4" barrel .45 at 15yds. is a challenge in itself.If you add the slightest flinching or what not it's going to be way off.There are some that can be a crackshot with this gun but I'm still practicing with my 4516-1 and it can get quite frustrating.You have to remember that the .45 round was designed from a 5" barrel.When you shorten a .45 barrel to that extent you lose muzzle velocity ultimately allowing the bullet to drop sooner.Keep practicing,and practicing some more.Longer distances just can't be immediately expected from a close quarters combat weapon.The 4516 is a blast to shoot.Such a short barrel but recoil is laughable because of it's weight and that's a good advantage to have from that barrel length because in time you will be able to follow up shots faster.I have been given a wealth of great knowledge on this forum there are kind souls on here always willing to help anyone out...I love this bar
Reply With Quote
  #20  
Old 05-08-2019, 03:07 PM
ny6u ny6u is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: May 2019
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Fastbolt View Post
The significant amount of times that one of our folks has brought a pistol to me, claiming it was consistently shooting low, I've tried the gun and found it's shooting fine with regard to POA/POI.

What I've found is the shooter was experiencing anticipatory flinch and depressing the muzzle, causing the hits to cluster lower than he/she thought they were aiming. (At the moment of anticipating the recoil they lost focus on their sights, and couldn't see they were actually shooting low.)

A session with some dummy rounds randomly loaded into their magazine (so they didn't know when they would be chambered) allowed them to see for themselves how they were pushing the muzzle down just at the moment they expected the gun to fire & recoil in their hand, which they didn't notice when they were shooting live rounds.

The first thing you might do is find an experienced shooter to try your 4516-1. Or, you might find an experienced instructor to try the gun, and then spend some time working with you to identify and correct any issues you may be experiencing when it comes to your technique.

If it turns out that the gun is really shooting that low at that distance, then the front sight might require replacement ... but first the shooter influence probably ought to be eliminated (as it's not an uncommon issue to encounter).

Just my thoughts.

I absolutely agree with this assessment. I have owned this firearm for
the last 20 years and the short 3.75" barrel requires absolutely still
trigger-pulling technique with 230 grain ammo. your grip is also
crucial as the gun must be held much more firmly.


This is even more difficult in Double action. Therefore this is a
firearm for relatively close range. Achieving good marksmanship
even out to 25yd is a big challenge. Reaching decent competency
with this firearm requires a lot of practice and tons of rounds through it.
But if you can master shooting this gun, you can pretty much shoot
anything IMHO.

Last edited by ny6u; 05-08-2019 at 03:11 PM.
Reply With Quote
  #21  
Old 05-08-2019, 03:12 PM
ny6u ny6u is offline
Member
accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1 accuracy of my 4516-1  
Join Date: May 2019
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default

I absolutely agree with this assessment. I have owned this firearm for the last 20 years and the short 3.75" barrel requires absolutely still trigger-pulling technique with 230 grain ammo. your grip is also crucial as the gun must be held much more firmly.


This is even more difficult in Double action. Therefore this is a
firearm for relatively close range. Achieving good marksmanship
even out to 25yd is a big challenge. Reaching decent competency with this firearm requires a lot of practice and tons of rounds through it.
But if you can master shooting this gun, you can pretty much shoot anything IMHO.
Reply With Quote
Reply

Tags
1911, 22lr, 4506, 4516, 4566, 5906, 617, 640, 686, bullseye, hogue, sig arms, silhouette, tactical, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
4516 mag 4516-1 mag what's the diff Kid Shileen Smith & Wesson Semi-Auto Pistols 28 11-14-2016 09:19 PM
FOUND ONE WANT TO BUY 4516-1 or 4516-2 MR835 WANTED to Buy 0 09-13-2012 04:02 PM
FS in AZ Only: Excellent ++++ S&W 4516-2, 4516-1 & 1066 Leiden GUNS - For Sale or Trade 0 07-17-2011 06:08 PM
4516-1 take 4516-2 dual recoil springs? Leiden Smith & Wesson Semi-Auto Pistols 9 09-03-2010 04:16 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:56 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)