|
|
12-20-2011, 04:22 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Hamilton, NJ
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
|
Model 52 barrel
New to the forum, my first post. Does anyone know if a barrel from a model 52 will fit a model 52-2? I have a 52-2 that needs a new barrel and found someone that is selling one for a 52 part #6207.
Thanks!
|
12-20-2011, 11:51 PM
|
|
Member
|
|
|
Join Date: Nov 2008
Posts: 1,307
Likes: 23
Liked 613 Times in 244 Posts
|
|
Welcome. The 52 barrel should work in the 52-2 but it may need some fitting by a qualified gun smith. The barrel needs to fit the bushing correctly and lock-up tight with the slide for good accuracy.
Why does your 52-2 need a new barrel?
|
12-21-2011, 12:58 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 999 Times in 536 Posts
|
|
Probably 'cause it's bulged . Load a HBWC too hot blow the skirt off & then shoot another round . Bulge one every time . Saw a guy blow the extractor out of a pristine 52-2 shooting Berry's plated HBWC's loaded with 3.5gr Bullseye . 2.7 to 3.0 max with a lead HBWC . Some folks forget they're a target pistol & try and hot rod 'em .
|
12-21-2011, 01:38 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Hamilton, NJ
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by civil1977
Welcome. The 52 barrel should work in the 52-2 but it may need some fitting by a qualified gun smith. The barrel needs to fit the bushing correctly and lock-up tight with the slide for good accuracy.
Why does your 52-2 need a new barrel?
|
It's bulged!
|
12-21-2011, 10:37 PM
|
|
Member
|
|
|
Join Date: Nov 2008
Posts: 1,307
Likes: 23
Liked 613 Times in 244 Posts
|
|
I was afraid of that.....bummer.
|
12-22-2011, 02:02 AM
|
|
Member
|
|
|
Join Date: Mar 2006
Location: Sainte Genevieve MO
Posts: 1,263
Likes: 991
Liked 565 Times in 234 Posts
|
|
Does it still work
Hi DT,
Is the bulge in a place that allows the gun to operate?
I was around a long slide Clark gun for a while that had a bad bulge. It worked and still shot good. Go Figure?
I'd be sure the bushing is not getting to the bulge, and if not try shooting it.
Good luck
Mike
Last edited by mstuhr; 12-22-2011 at 02:05 AM.
Reason: over sight
|
12-24-2011, 12:57 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Hamilton, NJ
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by mstuhr
Hi DT,
Is the bulge in a place that allows the gun to operate?
I was around a long slide Clark gun for a while that had a bad bulge. It worked and still shot good. Go Figure?
I'd be sure the bushing is not getting to the bulge, and if not try shooting it.
Good luck
Mike
|
Hi Mike,
The bulge is about an inch from the muzzle. It's not real bad, doesn't hit the bushing. I sent the barrel off to Clark Custom yesterday, they're going to try rolling out the bulge. They said it can be done as long as the barrel is not too hard. Have my fingers crossed!
|
|
Posting Rules
|
|
|
|
|
All times are GMT -4. The time now is 11:53 PM.