Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Closed Thread
 
Thread Tools Display Modes
  #1  
Old 05-13-2017, 01:00 AM
SHAMUSPI's Avatar
SHAMUSPI SHAMUSPI is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2010
Location: Puget Sound, WA
Posts: 54
Likes: 0
Liked 6 Times in 2 Posts
Default MIM Parts

Hi folks,

RE: My PC 1911sc & E Series 1911sc and government. Would any of you good people know what parts in my S&W 1911's are made of MIM I am looking to replace them with machined steel.

Much thanks.
__________________
Evil, Wicked, Mean & Nasty!
The Following User Likes This Post:
  #2  
Old 05-13-2017, 05:27 PM
BruceM's Avatar
BruceM BruceM is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Oct 2003
Location: Southeast Wisconsin
Posts: 1,750
Likes: 7
Liked 657 Times in 369 Posts
Default

Maybe a Smith 1911 isn't for you if you want to start rebuilding the gun immediately due to the use of inferior components.

Bruce
The Following User Likes This Post:
  #3  
Old 05-13-2017, 05:53 PM
armorer951's Avatar
armorer951 armorer951 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,205
Likes: 481
Liked 11,335 Times in 3,505 Posts
Default

According to reports I've read, only the thumb safety, grip safety, and the magazine release are MIM.
__________________
Ret. LE, FA Instr, S&W Armorer
  #4  
Old 05-13-2017, 05:57 PM
TAROMAN's Avatar
TAROMAN TAROMAN is offline
US Veteran
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,290
Likes: 8,789
Liked 7,778 Times in 2,375 Posts
Default

Why replace parts that aren't broken?
__________________
-jwk-
US Army '72-'95
The Following 4 Users Like Post:
  #5  
Old 05-13-2017, 06:12 PM
gman51 gman51 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Feb 2012
Location: Just West of Houston
Posts: 3,468
Likes: 787
Liked 4,674 Times in 2,062 Posts
Default

The big MIM scare is hardly worth it. MIM parts have been used in guns for many years but yet the guns aren't failing like would be expected by the MIM scare.
For instance timing gears on automotive engines have been made of plastic for many years also but they aren't cratering like one might think versus using steel gears.
I would say now just about any quality made gun even with MIM parts will outlast the owner. Why aren't the gun forums swamped with reports of MIM failures? Probably because it isn't happening.
The Following 4 Users Like Post:
  #6  
Old 05-13-2017, 06:46 PM
regalsc regalsc is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2014
Posts: 971
Likes: 169
Liked 563 Times in 334 Posts
Default

Gun manufacturers like Springfield & Smith&Wesson are pretty stupid to provide lifetime warrantys on guns with parts that will fail or do they know they won't fail like some think they will.
The Following 2 Users Like Post:
  #7  
Old 05-13-2017, 06:47 PM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,476
Likes: 8,386
Liked 17,059 Times in 5,594 Posts
Default

Can anyone even refer a post where a MIM part on a 1911 failed?
__________________
So many S&W's, so few funds!!
The Following User Likes This Post:
  #8  
Old 05-13-2017, 06:49 PM
ken158 ken158 is offline
Member
MIM Parts MIM Parts  
Join Date: Nov 2005
Location: VA
Posts: 4,667
Likes: 1,437
Liked 4,488 Times in 1,927 Posts
Default

Quote:
Originally Posted by SHAMUSPI View Post
Hi folks,

RE: My PC 1911sc & E Series 1911sc and government. Would any of you good people know what parts in my S&W 1911's are made of MIM I am looking to replace them with machined steel.

Much thanks.
What would be the reason you want to replace MIM parts in your 1911? I have had forged parts break nun never MIM parts break...

Last edited by ken158; 05-14-2017 at 01:46 PM.
The Following User Likes This Post:
  #9  
Old 05-13-2017, 07:50 PM
Arik Arik is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

Quote:
Originally Posted by TAROMAN View Post
Why replace parts that aren't broken?
Because MIM is very much like dries brittle plastic. One or two shots and the whole thing crumbles.

There's a guy on another forum who competes with a Springfield TRP, which does have some MIM parts. So far nothing MIM has broken at a documented 120k rounds. A M A Z I N G

Sent from my XT1650 using Tapatalk
The Following User Likes This Post:
  #10  
Old 05-13-2017, 08:06 PM
epj's Avatar
epj epj is offline
US Veteran
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Dec 2005
Location: Birmingham, Alabama
Posts: 4,481
Likes: 227
Liked 2,397 Times in 1,081 Posts
Default

I have heard a few anecdotal reports of slide stops breaking on some MIM equipped 1911's. Not necessarily S&W's. That's out of 10's of thousands of guns equipped with MIM parts. If the MIM parts don't break almost immediately, they probably aren't going to.
The Following 2 Users Like Post:
  #11  
Old 05-13-2017, 08:08 PM
WisconsinKen WisconsinKen is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Mar 2012
Location: Central Wisconsin
Posts: 494
Likes: 107
Liked 279 Times in 146 Posts
Default

In defense of the OP, if you are planning on "blinging" out your 1911 and you feel there is even a slight risk with MIM parts, why not find out what they are and swap those out first?
  #12  
Old 05-13-2017, 09:43 PM
HCH HCH is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2012
Location: Hancock County Ohio
Posts: 710
Likes: 2,507
Liked 525 Times in 235 Posts
Default

Search our forum for BG380 MIM barrels
  #13  
Old 05-13-2017, 10:33 PM
Arik Arik is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

I wouldn't compare a BG380 to the S&W 1911

Sent from my XT1650 using Tapatalk
  #14  
Old 05-13-2017, 11:40 PM
SHAMUSPI's Avatar
SHAMUSPI SHAMUSPI is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2010
Location: Puget Sound, WA
Posts: 54
Likes: 0
Liked 6 Times in 2 Posts
Default

Many of you have asked "why?". Fair question. I bought S&W because of their quality and reputation, despite there being many 1911's out there at much cheaper prices. My retort is, if there are far stronger parts available, why even consider having something break in a life and death situation? So, again, other than Armorer951, does anyone else know which parts are MIM?
__________________
Evil, Wicked, Mean & Nasty!
  #15  
Old 05-13-2017, 11:43 PM
BruceM's Avatar
BruceM BruceM is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Oct 2003
Location: Southeast Wisconsin
Posts: 1,750
Likes: 7
Liked 657 Times in 369 Posts
Default

Quote:
In defense of the OP, if you are planning on "blinging" out your 1911 and you feel there is even a slight risk with MIM parts, why not find out what they are and swap those out first?
His post does NOT lead me to believe that he is "blinging out" the gun but rather is in the process of running scared due to an internet enhanced MIM parts panic attack. Like I said, if he feels so strongly that MIM parts are inferior, possibly a Dan Wesson, Ed Brown, Wilson Combat or Les Baer is in order.

Then again, I could be wrong. Have been before-will be again.

Quote:
does anyone else know which parts are MIM
Easy, the broken ones. By the way, have you ever seen forged parts broken? I have and more often than you think.

Quote:
My retort is, if there are far stronger parts available, why even consider having something break in a life and death situation?
If the Russians have enough nuclear weapons to blow up the world 8 times and the USA enough to do it 12 times, which is the more powerful military?

Anyway...............

Bruce

Last edited by BruceM; 05-13-2017 at 11:53 PM.
The Following User Likes This Post:
  #16  
Old 05-13-2017, 11:45 PM
HCH HCH is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2012
Location: Hancock County Ohio
Posts: 710
Likes: 2,507
Liked 525 Times in 235 Posts
Default

Quote:
Originally Posted by Arik View Post
I wouldn't compare a BG380 to the S&W 1911

Sent from my XT1650 using Tapatalk
I should have explained better. The point was if a MIM barrel is OK, so are less critical and less stressed MIM parts.
The Following User Likes This Post:
  #17  
Old 05-14-2017, 06:27 AM
ko41's Avatar
ko41 ko41 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2006
Location: MN
Posts: 984
Likes: 41
Liked 2,192 Times in 415 Posts
Default

Hammer, sear, disconnector, thumb safety, slide stop and magazine release.

KO
The Following 3 Users Like Post:
  #18  
Old 05-14-2017, 07:41 AM
fordson's Avatar
fordson fordson is offline
US Veteran
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jun 2015
Location: NE FL
Posts: 1,884
Likes: 1,396
Liked 3,993 Times in 1,250 Posts
Default

Quote:
Originally Posted by ko41 View Post
Hammer, sear, disconnector, thumb safety, slide stop and magazine release.

KO
Bravo .... a simple answer to a simple question, no lecture.
__________________
"Your other right........."
The Following 5 Users Like Post:
  #19  
Old 05-14-2017, 10:40 AM
WisconsinKen WisconsinKen is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Mar 2012
Location: Central Wisconsin
Posts: 494
Likes: 107
Liked 279 Times in 146 Posts
Default

Quote:
Originally Posted by ko41 View Post
Hammer, sear, disconnector, thumb safety, slide stop and magazine release.

KO
Said in my best imitation of "Gone in 60 Seconds".....That's a big list.....

Thanks for the list KO.
The Following User Likes This Post:
  #20  
Old 05-14-2017, 10:47 AM
regalsc regalsc is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2014
Posts: 971
Likes: 169
Liked 563 Times in 334 Posts
Default

I need to be fair to the OP. I'm in my 60's so all the guns for a lot of my life have been tool steel parts so I was apprehensive about mim also until I started reading about how it's been developed & it's other applications. If I had grown up with mim I probably would never have given it a second thought.
The Following 2 Users Like Post:
  #21  
Old 05-14-2017, 12:29 PM
shocker's Avatar
shocker shocker is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Dec 2012
Location: Michigan
Posts: 1,482
Likes: 550
Liked 1,427 Times in 666 Posts
Default

If you drive or fly you are staking your life on MIM parts. MIM parts in a gun don't concern me at all.
The Following 2 Users Like Post:
  #22  
Old 05-14-2017, 12:36 PM
SOTVEN SOTVEN is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2017
Posts: 330
Likes: 2,132
Liked 349 Times in 161 Posts
Default

PERSONALLY, I THINK THAT MIM PARTS, ESPECIALLY FROM S&W, HAVE PROVEN THAT THEY ARE TROUBLE FREE. TO ME HOWEVER, IT IS THE COSMETICS. IN A BLUE, PARKERIZED, OR TWO TONE GUN, I WOULD NOT MIND THEM. BUT BLACK MIM OVER STAINLESS.... YUUUUUK! JUST MY OPINION THOUGH
  #23  
Old 05-14-2017, 01:13 PM
Fastbolt's Avatar
Fastbolt Fastbolt is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jul 2002
Location: CA Central Coast
Posts: 4,638
Likes: 915
Liked 6,591 Times in 2,191 Posts
Default

Quote:
Originally Posted by epj View Post
I have heard a few anecdotal reports of slide stops breaking on some MIM equipped 1911's. Not necessarily S&W's. That's out of 10's of thousands of guns equipped with MIM parts. If the MIM parts don't break almost immediately, they probably aren't going to.
I can think of a few Colt 1911's that suffered broken slide stop levers, but it also turned out the guns were being run hard, using a lot of +P ammunition, without recoil springs being replaced very often.
__________________
Ret LE Firearms inst & armorer
The Following User Likes This Post:
  #24  
Old 05-14-2017, 01:31 PM
S&W Rover's Avatar
S&W Rover S&W Rover is offline
Member
MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2007
Location: USA
Posts: 1,342
Likes: 1,255
Liked 1,134 Times in 521 Posts
Default

Here is an interesting item on MIM parts from a S&W manager, which I copied from this forum some time ago (it is at least eight years old, maybe older, but still pertains):

FAQ's: FAQ's for the 'original' letter.

I have read with much interest the many comments in this [Smith and Wesson] forum pertaining to MIM, MIM Parts and the use of same in a S&W product. So far I have come away with several impressions and they are, "people in general don't like/trust MIM parts", and, "no one has said why." I will take a stab at this issue and see where it goes.

As background to our decision to use MIM in some areas of our Mfg Process we took a long hard look at our "Life Time Service Policy". It was clear to us that any change in any of our products such as the use of MIM components had to show equivalent or better performance and durability to those components that were being replaced or the "Lifetime Service" would haunt us forever. The second consideration was to determine if the change was too radical a departure from S&W mainstream design.

For the performance and durability issues we decided that if MIM could be used for the fabrication of revolver hammers and triggers successfully this would truly be an "Acid Test". There is nothing more important to a revolver's feel than the all-important Single Action that is established between the hammer and the trigger. Mechanically few places in a revolver work harder than at the point where the hammer and trigger bear against each other. If these surfaces wear or lose their edge the "feel" is lost. Initial testing was on these two critical parts.

Over time we arrived at a point where our best shooters could not tell the difference between a revolver with the old-style hammer and trigger and the new MIM components. Special attention was given to their endurance when used in our very light magnum J-frames such as the early prototype 340 & 360 Sc's. None of our revolvers work their components harder than these small magnum revolvers. Throughout this testing MIM held strong and finally we determined that this change judged on the basis of durability and feel was a good one.

The second area of concern to S&W was our customer’s reaction to this departure from the traditional. Many heated, intense discussions resulted but in the end the decision was made to move ahead with MIM. The issue of cost was only one of the considerations in making this decision. Equally as important was the issue of part-to-part uniformity and the result of this of course is revolver-to-revolver consistency. We found that revolvers that used MIM hammers and triggers required almost no fitter intervention in those areas during final assembly and final inspection and trigger-pull monitor rejection rates dropped markedly on finished guns. From an internal process point of view it appeared a "Winner".

Let's shift gears for a moment and talk about the MIM process. It is unclear to me as to the reason for many of the negative feelings on the forum concerning MIM. Typically when people complain and aren't specific in the reason why, the problem is often created by a departure from the "Traditional". Perhaps that is indeed what is bothering some people when they view MIM.

The term MIM stands for Metal Injection Molding. It holds some similarities to Plastic Injection Molding and many differences as well. To start we would take a finally divided metal powder. This could be stainless or carbon steel. Today even titanium is being used in some MIM fabrications. We would mix the metal powder and a thermoplastic binder (generally a wax) forming slurry of sorts when heated and inject this mix into a precision mold and finally form what is known as a “green part". This part is roughly 30% larger than the finished part it will become at the end of the process. Interestingly enough the green part at this stage can be snapped in two with simple finger pressure. The green parts are then placed in a sintering furnace filled with dry hydrogen gas and the temperature is brought almost to the melting point of the metal being used. Over time the wax in the green part is evaporated, the metal fuses and the part shrinks 30% to it's final correct dimensions. At this stage of the process the MIM part has developed 98 to 99%of the density of the older wrought materials and a metallurgy that is almost identical. Dimensionally it is finished and no machining is required. However the job is not yet done and the MIM parts are brought to our heat treat facility for hardening and in the case of hammers and triggers, case hardening. Depending on the particular metal alloy that was used at the start of the process we apply a heat treat process that is the same as would be used if the material were the older wrought style. Final hardness, case thickness and core hardness are for the most part identical to parts manufactured the older way.

Lets look for a moment at how we achieve dimensional precision when comparing these 2 processes. The old parts were each machined from either bar stock or a forging. Each cut and every resulting dimension was subject to machine variations, cutter wear, operator variations etc. If every operation was done exactly right each and every time and the cutter didn't let you down you would have produced a good part but sometimes this didn’t happen, resulting in a rejected gun and rework or in the worst case an unhappy customer. With MIM parts you must still machine to very high tolerances and your cutters have to be perfect and your machinist has to be highly qualified but all of this only has to come together one time. That time is when the injection mold is made. Typically a mold for this process costs S&W between $30,000.00 and $50,000.00; once it is perfect every part it makes mirrors this perfection and you have, in my view, a wonderful manufacturing process.

Hopefully this description will help us all better understand the MIM process. Please forgive the spelling errors and misplaced punctuation. I have no spell checker on this and the phone continues to ring!

Have a Great Weekend,

Herb [Belin, Project Manager, Smith & Wesson]


Additional Point:

Currently S&W is paying about $1.20/Lb for stainless steel bar stock. Raw MIM stainless steel inject able material costs $10.00/Lb.
__________________
S&W Rover

Last edited by S&W Rover; 05-14-2017 at 01:35 PM.
The Following 10 Users Like Post:
  #25  
Old 05-14-2017, 02:30 PM
BruceM's Avatar
BruceM BruceM is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Oct 2003
Location: Southeast Wisconsin
Posts: 1,750
Likes: 7
Liked 657 Times in 369 Posts
Default

Thanks S&W Rover.

Every once in awhile facts need to rule over emotion and hearsay. MIM has come a long, long way since folks like Dornaus & Dixon pioneered it in firearms in the early 1980's and the big "K" raped it's reputation in the early 2000's. The realization that MIM major components are used in applications in the aviation and automotive industries cast a different light on this "life and death" firearms conversation or at least it should.

Anyway, Smith & Wesson uses very high quality MIM components in a few appropriate applications. Applications that MIM is NOT appropriate for are things which flex such as springs and internal 1911 extractors.

Quote:
Currently S&W is paying about $1.20/Lb for stainless steel bar stock. Raw MIM stainless steel inject able material costs $10.00/Lb.
It always makes me chuckle when some "expert" expounds on this and other forums that he doesn't want any of those "cheap pot metal MIM parts" in his self defense guns.

Bruce

Last edited by BruceM; 05-17-2017 at 12:58 AM.
The Following 4 Users Like Post:
  #26  
Old 05-14-2017, 04:13 PM
Practical Practical is offline
Member
MIM Parts  
Join Date: Apr 2003
Posts: 661
Likes: 4
Liked 289 Times in 166 Posts
Default

It sounds like you are replacing the parts for 'mental' reasons.

I don't think machined parts are necessarily better than MIM.

To assure reliability both would need to be made by quality processes and xrayed for defects.

I doubt you will get parts in either category made with such quality control processes to get the reliability you need.

If you want such reliability buy a glock or M&P, the designs are the current state of the art in high reliability police/professional use.

ANY gun made for the commercial market even with bar stock forged parts won't have modern engineering and quality control behind it.

You won't have a engineer designing it with a MTBF or mean time before failure analysis going on.

Bluntly commercial guns have commercial quality and no one is doing engineering analysis on their products other than to ensure any warranty period is satisfied.

Last edited by Practical; 05-14-2017 at 04:16 PM. Reason: Change word gun to engineer
  #27  
Old 05-14-2017, 05:54 PM
SOTVEN SOTVEN is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2017
Posts: 330
Likes: 2,132
Liked 349 Times in 161 Posts
Default

Quote:
Originally Posted by Practical View Post
It sounds like you are replacing the parts for 'mental' reasons.

I don't think machined parts are necessarily better than MIM.

To assure reliability both would need to be made by quality processes and xrayed for defects.

I doubt you will get parts in either category made with such quality control processes to get the reliability you need.

If you want such reliability buy a glock or M&P, the designs are the current state of the art in high reliability police/professional use.

ANY gun made for the commercial market even with bar stock forged parts won't have modern engineering and quality control behind it.

You won't have a engineer designing it with a MTBF or mean time before failure analysis going on.

Bluntly commercial guns have commercial quality and no one is doing engineering analysis on their products other than to ensure any warranty period is satisfied.
TO EACH HIS OWN I GUESS MY FRIEND, BUT PERSONALY I WOULD PICK ANY MIM OVER ANY TUPPERWEAR ANYTIME. AND I AM NO MIM FAN.
  #28  
Old 05-14-2017, 06:17 PM
ladder13 ladder13 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jul 2005
Location: NC
Posts: 30,692
Likes: 57,549
Liked 52,819 Times in 16,468 Posts
Default

Quote:
Originally Posted by BruceM View Post
.........



It always makes me chuckle when some "expert" expounds on this and other forums that doesn't want any of those "cheap pot metal MIM parts" in his self defense guns.

Bruce
I have to admit he does make me laugh. 😀
  #29  
Old 05-14-2017, 09:05 PM
67whaler 67whaler is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Sep 2016
Posts: 65
Likes: 11
Liked 61 Times in 37 Posts
Default

I have and enjoy both smith and Wesson and glocks. I even have a billboard stainless 1911 and a model 64with the dreaded mim parts. They all work as advertised and have never given me any problems. I completely understand those who love the traditional steel and wood guns- so do I. I have a couple of m1 garands that are kind of my showpieces. But you know the old saying- your beautiful 1911 is what you show your friends- your glock is what you show your enemies! Haha!
The Following User Likes This Post:
  #30  
Old 05-14-2017, 09:39 PM
SHAMUSPI's Avatar
SHAMUSPI SHAMUSPI is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: May 2010
Location: Puget Sound, WA
Posts: 54
Likes: 0
Liked 6 Times in 2 Posts
Default

WOW! When I posted my question I was hoping for a couple of replies, but not to create a firestorm. I will admit, you guys having me rethinking the idea of replacing parts that may be just as good as their replacements. Being that I am as old as dirt, I probably have been influenced by MIM failures when they first came out. In any case, THANKS TO ALL!
__________________
Evil, Wicked, Mean & Nasty!
The Following 5 Users Like Post:
  #31  
Old 05-14-2017, 09:47 PM
67whaler 67whaler is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Sep 2016
Posts: 65
Likes: 11
Liked 61 Times in 37 Posts
Default

It's ok. Firestorms and healthy debate are fun! I've accidentally started a few myself! How boring would life be if we all liked the same things in exactly the same way???? Yeah I don't want that either.
The Following 2 Users Like Post:
  #32  
Old 05-14-2017, 10:21 PM
WisconsinKen WisconsinKen is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Mar 2012
Location: Central Wisconsin
Posts: 494
Likes: 107
Liked 279 Times in 146 Posts
Default

I would not argue that the after market machined parts are not better than the MIM parts in my 1911SC. Take for instance the ambi safety. Perfectly functional so far in my SC. However, it is not nearly as nice as the Wilson ambi I put on my Billboard. So, it really boils down to personal taste and the acceptable price point.
  #33  
Old 05-14-2017, 10:23 PM
Fastbolt's Avatar
Fastbolt Fastbolt is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jul 2002
Location: CA Central Coast
Posts: 4,638
Likes: 915
Liked 6,591 Times in 2,191 Posts
Default

FWIW ... (what you paid for it ) ... I've been using MIM 3rd gen parts since I was introduced in them toward the end of the 90's, and typically found them to exhibit better, tighter tolerances than the same forged or cast steel parts.

Also, in my '05 vintage SW1911SC 5", the only part that "failed" after several years was a plunger tube (staking let go), which isn't a MIM part.

I'm a long time 1911 owner/shooter (and went through the Colt Model O Pistol armorer class), so I'm somewhat fussy about the quality of the parts that go in my 1911's.

Now, just like when we're talking machined forged & cast parts, where the quality of forged and cast may run the gamut of quality being anywhere from not-so-good to great, the same might be said of MIM. Also, in addition to the quality of the MIM material, there's the quality of the MIM molds to consider.

That's why we were told (in a late 90's armorer class) that S&W wisely decided to select and own the MIM molds used to make their parts, even when they're made by an out-sourced "MIM house" vendor, so they can have control over the quality of the molds, themselves.

I won't name the gun company involved, but some years ago I remember hearing how one gun company once took bids for MIM parts for their branded pistols, and when they got bids for the work, decided to use a vendor that offered a less expensive bid.
__________________
Ret LE Firearms inst & armorer
The Following 3 Users Like Post:
  #34  
Old 05-14-2017, 11:02 PM
S&W Rover's Avatar
S&W Rover S&W Rover is offline
Member
MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2007
Location: USA
Posts: 1,342
Likes: 1,255
Liked 1,134 Times in 521 Posts
Default

Quote:
Originally Posted by SHAMUSPI View Post
WOW! When I posted my question I was hoping for a couple of replies, but not to create a firestorm. I will admit, you guys having me rethinking the idea of replacing parts that may be just as good as their replacements. Being that I am as old as dirt, I probably have been influenced by MIM failures when they first came out. In any case, THANKS TO ALL!
I think MIM started out with a bad reputation, for sure. I remember when the Sig Forum was scandalized because someone found pictures of some Sig-Sauer parts in an advertisement on a web page from an Indian metal company. I don't know if that Indian company really proved to be the source of those Sig parts, but they actually have a great reputation as a world-class producer of all sorts of MIM items.

But I think S&W (and Sig) have the MIM process down pretty good now. I have never had a part from a S&W (or a Sig!) gun break, through many thousands of rounds. On top of that, I would venture that for most parts for most guns, there really is only one source, and it often involves MIM.
__________________
S&W Rover

Last edited by S&W Rover; 05-14-2017 at 11:07 PM.
The Following User Likes This Post:
  #35  
Old 05-15-2017, 09:19 AM
ladder13 ladder13 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jul 2005
Location: NC
Posts: 30,692
Likes: 57,549
Liked 52,819 Times in 16,468 Posts
Default

Quote:
Originally Posted by S&W Rover View Post
I think MIM started out with a bad reputation, for sure. I remember when the Sig Forum was scandalized because someone found pictures of some Sig-Sauer parts in an advertisement on a web page from an Indian metal company. I don't know if that Indian company really proved to be the source of those Sig parts........................
Could be the source for the many years of Sig substandard product.
  #36  
Old 05-15-2017, 09:54 AM
JHB51 JHB51 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2011
Location: Indiana
Posts: 362
Likes: 94
Liked 79 Times in 36 Posts
Default

In the early 70s I worked as a tool maker for a Swiss stamping shop. We built the tooling and ran production for Charter arms hammers and triggers. Out sourcing parts around the world is nothing new.
  #37  
Old 05-15-2017, 10:51 AM
reddog81 reddog81 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Sep 2014
Location: IA
Posts: 1,716
Likes: 973
Liked 1,619 Times in 794 Posts
Default

I'm all for customizing and having options, but be aware that any of the parts you replace are just as likely to need fitting as they are to be drop-in. You can't just replace the hammer, sear, slide stop and thumb safety and expect the gun to function exactly like it did before. Make sure to keep the factory parts if replace anything because in the long run those parts are probably the best option.

If it makes you feel any better some Colt's come with a plastic mainspring housing.
  #38  
Old 05-15-2017, 04:40 PM
SOTVEN SOTVEN is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Apr 2017
Posts: 330
Likes: 2,132
Liked 349 Times in 161 Posts
Default

Quote:
Originally Posted by regalsc View Post
Gun manufacturers like Springfield & Smith&Wesson are pretty stupid to provide lifetime warrantys on guns with parts that will fail or do they know they won't fail like some think they will.
HMMMM... I DO NOT KNOW ABOUT SPRINGFIELD FRIEND, BUT S&W SEEMS TO HAVE FORGOTTEN ABOUT WARRANTIES FOR THE 3RD GEMS ATLEAST. SO, AS MUCH AS I WOULD LIKE TO BELIEVE THAT MIM IS A BETTER OR EQUAL SOLUTION, I AM MORE CONVINCED THAT IT IS A MORE COST EFFECTIVE SOLUTION. AGAIN, COMPANIES ARE THERE TO MAKE A DOLLAR, AND I WILL NOT BE THE ONE TO JUDGE THEM. ITS A MARKET DRIVEN WORLD, AND WHAT THE MAJORITY OF THE MARKET WANTS, WE ALL END UP GETTING.

"THIS KEY SAY THE PADRE DROVE A MERCEDES. OR AT LEAST THATS WHAT THEY ARE PASSING OFF AS A MERCEDES THESE DAYS. MODERN CARS, THEY ALL LOOK LIKE ELECTRIC SHAVERS" (MARV, SIN CITY)
The Following User Likes This Post:
  #39  
Old 05-15-2017, 10:56 PM
18DAI's Avatar
18DAI 18DAI is offline
Absent Comrade
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Sep 2005
Location: GSO NC
Posts: 6,106
Likes: 23,604
Liked 13,182 Times in 2,860 Posts
Default

MIM is a cost cutting measure that profits the manufacturer. Nothing more. And when it breaks it looks exactly like cheap pot metal.

When I see Wilson Combat or Les Baer putting it in their guns then perhaps I will reconsider. But I don't consider or value, the opinions of fanboys.

I recall that the absence of MIM parts was a selling point in S&W Performance Center ads. Back before the "Performance Center" was just another assembly line in the main factory. YMMV. Regards 18DAI
__________________
7 +1 Rounds of hope & change
The Following User Likes This Post:
  #40  
Old 05-16-2017, 08:00 AM
Arik Arik is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jan 2012
Location: Outside Philadelphia Pa
Posts: 16,601
Likes: 7,342
Liked 17,200 Times in 7,303 Posts
Default

Someone has to remind my revolver that only MIM hammers are supposed to break!

So far my experience is MIM parts broken 0. None MIM broken 1

Sent from my XT1650 using Tapatalk
The Following User Likes This Post:
  #41  
Old 05-17-2017, 01:11 AM
BruceM's Avatar
BruceM BruceM is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Oct 2003
Location: Southeast Wisconsin
Posts: 1,750
Likes: 7
Liked 657 Times in 369 Posts
Default

Quote:
MIM is a cost cutting measure that profits the manufacturer. Nothing more. And when it breaks it looks exactly like cheap pot metal.
The part itself is actually more expensive on a piece by piece basis. The savings are in diminished hand fitting. It makes zero sense to utilize a more expensive part which still requires extensive hand fitting and is a little more difficult to work with.

Quote:
I recall that the absence of MIM parts was a selling point in S&W Performance Center ads. Back before the "Performance Center" was just another assembly line in the main factory.
Quote:
When I see Wilson Combat or Les Baer putting it in their guns then perhaps I will reconsider. But I don't consider or value, the opinions of fanboys.
I recall no such reference by anybody other than Dan Wesson. Wilson Combat made a line of MIM components and used same in some guns for a few years and then discontinued them. I suspect that they were not selling well in their market slot and a number of their more enlightened prospective customers complained.

The folks who occupy that market share your misinformation and these builders all hand fit oversized parts to fit on a one on one basis. This is the exact opposite of the manufacturing goals which call for the use of MIM parts. In essence, it's all about what the builder is used to and comfortable with plus what the prospective buyer expects at those guns' price point ie: extensive hand fitting of forged and barstock parts.

It should be noted that Smith & Wesson professional shooters such as Jerry Miculek and Judy Golob use guns with MIM parts in competition.

As far as your comments concerning "fanboys", the conventional wisdom regarding those who utter said comments is that ignorance is bliss!

Bruce

Last edited by BruceM; 05-17-2017 at 10:35 PM.
The Following 2 Users Like Post:
  #42  
Old 05-17-2017, 07:55 AM
ladder13 ladder13 is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Jul 2005
Location: NC
Posts: 30,692
Likes: 57,549
Liked 52,819 Times in 16,468 Posts
Default

Quote:
Originally Posted by Fastbolt View Post
FWIW ... (what you paid for it ) ... I've been using MIM 3rd gen parts since I was introduced in them toward the end of the 90's, and typically found them to exhibit better, tighter tolerances than the same forged or cast steel parts.

Also, in my '05 vintage SW1911SC 5", the only part that "failed" after several years was a plunger tube (staking let go), which isn't a MIM part.

I'm a long time 1911 owner/shooter (and went through the Colt Model O Pistol armorer class), so I'm somewhat fussy about the quality of the parts that go in my 1911's.

Now, just like when we're talking machined forged & cast parts, where the quality of forged and cast may run the gamut of quality being anywhere from not-so-good to great, the same might be said of MIM. Also, in addition to the quality of the MIM material, there's the quality of the MIM molds to consider.

That's why we were told (in a late 90's armorer class) that S&W wisely decided to select and own the MIM molds used to make their parts, even when they're made by an out-sourced "MIM house" vendor, so they can have control over the quality of the molds, themselves.

I won't name the gun company involved, but some years ago I remember hearing how one gun company once took bids for MIM parts for their branded pistols, and when they got bids for the work, decided to use a vendor that offered a less expensive bid.

Nuff said about this from someone who knows, and has no axe to grind.
__________________
Sure you did

Last edited by ladder13; 05-17-2017 at 08:24 AM.
  #43  
Old 05-17-2017, 11:32 AM
Tom S.'s Avatar
Tom S. Tom S. is offline
Moderator
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Nov 2015
Location: SE Michigan
Posts: 18,476
Likes: 8,386
Liked 17,059 Times in 5,594 Posts
Default

When fire was invented, it was "I'll be damned if I'll give up raw meat.".
When huts came out, it was "I'll be damned if I'll give up my cave.".
When horseless carriages came out, it was "I'll be damned if I'll give up my horse.".
When electric lights came out, it was "I'll be damned if I'll give up my gas lights.".
When washing machines came out, it was "I'll be damned if I'll give up my rocks.".
When vacuum machines came out, it was "I'll be damned if I'll give up my broom.".
When stainless steel came out, it was "I'll be damned if I'll give up my chrome moly.".
When bottled beer came out, it was "I'll be damned if I'll give up my draft.".
When canned beer came out, it was "I'll be damned if I'll give up my bottled beer.".

I could go on all day, but I won't as you get the idea.

Some just can't live with progress.
__________________
So many S&W's, so few funds!!
The Following User Likes This Post:
  #44  
Old 05-17-2017, 10:32 PM
BruceM's Avatar
BruceM BruceM is offline
Member
MIM Parts MIM Parts MIM Parts MIM Parts MIM Parts  
Join Date: Oct 2003
Location: Southeast Wisconsin
Posts: 1,750
Likes: 7
Liked 657 Times in 369 Posts
Default

Quote:
When fire was invented, it was "I'll be damned if I'll give up raw meat.".
When huts came out, it was "I'll be damned if I'll give up my cave.".
When horseless carriages came out, it was "I'll be damned if I'll give up my horse.".
When electric lights came out, it was "I'll be damned if I'll give up my gas lights.".
When washing machines came out, it was "I'll be damned if I'll give up my rocks.".
When vacuum machines came out, it was "I'll be damned if I'll give up my broom.".
When stainless steel came out, it was "I'll be damned if I'll give up my chrome moly.".
When bottled beer came out, it was "I'll be damned if I'll give up my draft.".
When canned beer came out, it was "I'll be damned if I'll give up my bottled beer.".
Roger that!!

The flush toilet, investment casting and unibody will NEVER work and we never landed on the moon in 1969.

Bruce
The Following User Likes This Post:
Closed Thread

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SPF Model 52-2 parts lot (1 full slide, 2 barrels, 1 set of grips, many other parts) dacoontz Accessories/Misc - For Sale or Trade 0 08-08-2015 01:19 PM
Vintage J-Frame Parts: Flat Latch, Bolts, Screws and most internal parts usnrigger Accessories/Misc - For Sale or Trade 7 01-18-2014 01:19 PM
Mosin Nagant parts for sale,h&k epidemic knife, ruger 10/22 parts joey81 Accessories/Misc - For Sale or Trade 2 06-27-2012 07:22 PM
WTS K frame triggers, misc. sight parts New parts added Sarge1644 Accessories/Misc - For Sale or Trade 6 04-19-2010 09:33 AM
Is s&w replacing parts or just modifing existing parts for their known issues mp15-22 kilo6echo Smith & Wesson M&P 15-22 37 01-14-2010 01:36 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:51 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)