Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 04-07-2018, 11:43 AM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default Replaced the Ambi Safety on my CS9 Chiefs Special with LS version

So I just got back from vacation and was able to get around to installing the LS safety on my CS9. Itís one of the newer stainless models with ambi safety, but I donít need the right side control. I bought the new part from Numrich along with a new sear disconnect lever in case I needed to do some fitting. There was no fitting required in this case. Here is a pic of my ambi safety removed next to the new LS safety

It was quite simple to install with the slide in a vise. Just have to pop out the tab on the right side of the ambi safety with a small punch to depress the plunger. Then depress the FPB plunger as you push in the firing pin to allow clearance to slide the safety out the left side. I checked my firing pin and spring while I had it removed. Here is a pic of my firing pin and spring next to a new spring

I then polished the new safety with a Dremel and also polished the channel inside the hole in the slide that the safety lever detent rides in, because why not at this point. I installed the new LS safety and tested until I was confident the safety is gtg.

My CS9 is now even more lean and mean than before. Iíve got the 3913tsw Delrin grips I cut down, the metal Kahr mag base mod I got from this forum, and now the LS safety. Iím even contemplating grinding a few mils off the LS safety to further reduce the slide profile, but I definitely like it this way for now. I really canít say enough about having a modded CS9 available for carry.



Sent from my iPhone using Tapatalk

Last edited by Mercs; 04-07-2018 at 01:26 PM.
Reply With Quote
  #2  
Old 04-07-2018, 01:06 PM
Rcdyna Rcdyna is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Mar 2016
Location: Bucks County PA
Posts: 13
Likes: 11
Liked 22 Times in 7 Posts
Default

Good work, thanks for write up and pics. very nice.
Reply With Quote
The Following 3 Users Like Post:
  #3  
Old 04-08-2018, 02:54 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default Replaced the Ambi Safety on my CS9 Chiefs Special with LS version

I did some shopping and got a stainless 3913 trigger and stainless hammer. May later mil the safety down a bit and then have it coated to match stainless, along with a new mag release (3913 stainless release wonít fit CS9). I could even throw on the grey grips like a NL CS9. Yes Iím getting a bit out of control. Another separate post and some more pics to follow once parts arrive


Sent from my iPhone using Tapatalk

Last edited by Mercs; 04-08-2018 at 02:55 PM.
Reply With Quote
The Following User Likes This Post:
  #4  
Old 04-08-2018, 03:18 PM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 3,242
Likes: 5,118
Liked 5,468 Times in 1,827 Posts
Default

Great improvement! I don't want mud flaps (ambidextrous safety) on any of my pistols.
__________________
Wut up wi'that?
Reply With Quote
The Following 3 Users Like Post:
  #5  
Old 04-08-2018, 04:18 PM
18DAI's Avatar
18DAI 18DAI is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Sep 2005
Location: GSO NC
Posts: 4,753
Likes: 10,448
Liked 5,840 Times in 1,570 Posts
Default

Nice job!

I'm left handed, so I only use the single sided safety on my black early production CS9 as a decocker. I carry it with the safety off.

I was smoking and joking with some officers the other night. The concensus was that the subcompact 9mm guns are the modern equivalents of the small snubby revolvers - and have replaced the small revolver in LE service as BUGs and off duty guns.

I love my little CS9. I carry it off duty and it is my gun for when I "cant have a gun". Like at church or social functions with non gun folks. Great little pistol. Regards 18DAI
__________________
8 + 1 rounds of hope & change.
Reply With Quote
The Following 5 Users Like Post:
  #6  
Old 04-08-2018, 07:23 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

The hardest part of this modification is generally finding a left side only safety/decoker lever. I searched for a couple of years before I found a stainless one (the last one) from Cylinder and Slide. Since then, I've found a couple of black left side only levers for both the 3913 and 457.

If I ever find a 4513TSW that I want to buy, it will get one of the 457 levers. I already did the modification to my pre rail 3913TSW.

For me at least, thinning the profile of the 3rd Gen slides makes them just that much better for carry.
__________________
Can open, worms everywhere.
Reply With Quote
The Following 6 Users Like Post:
  #7  
Old 04-08-2018, 08:37 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default

Quote:
Originally Posted by GaryS View Post
The hardest part of this modification is generally finding a left side only safety/decoker lever. I searched for a couple of years before I found a stainless one (the last one) from Cylinder and Slide. Since then, I've found a couple of black left side only levers for both the 3913 and 457.

If I ever find a 4513TSW that I want to buy, it will get one of the 457 levers. I already did the modification to my pre rail 3913TSW.

For me at least, thinning the profile of the 3rd Gen slides makes them just that much better for carry.


This is so true. The LS safety is very hard to come by. Numrich just had it as in stock one day and it went out of stock after I bought it. This is why Iím a bit hesitant to cut into it even though It sticks out too far for my liking. I just use it for a decocker.


Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 04-08-2018, 09:30 PM
Warren Sear's Avatar
Warren Sear Warren Sear is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Apr 2011
Location: Twin Cites, Minnesota
Posts: 3,242
Likes: 5,118
Liked 5,468 Times in 1,827 Posts
Default

From the time I first bought them I have appreciated the "no mudflaps" slim slide profile of my two Model 457's.
Attached Thumbnails
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version-100_4545-jpg   Replaced the Ambi Safety on my CS9 Chiefs Special with LS version-100_4546-jpg  
__________________
Wut up wi'that?
Reply With Quote
The Following 3 Users Like Post:
  #9  
Old 04-08-2018, 10:13 PM
Big Shrek's Avatar
Big Shrek Big Shrek is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Mar 2014
Location: NW Florida
Posts: 643
Likes: 4,871
Liked 694 Times in 357 Posts
Cool

The reason I dearly love Ambi safety, and all Ambi controls,
is that I'm Ambi myself. I can write & do pretty much everything equally.
Came in mighty handy for SASS

Other benefits are being able to get all down & funky like Papa in
Boondock Saints...
__________________
Marlin & Calico Specialist

Last edited by Big Shrek; 04-08-2018 at 10:15 PM.
Reply With Quote
The Following 6 Users Like Post:
  #10  
Old 04-16-2018, 04:48 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default Replaced the Ambi Safety on my CS9 Chiefs Special with LS version

The stainless hammer and trigger I ordered before came, but they were looking worn, so I returned them. Ive since found a nice 3913 stainless hammer, ever so slightly polished it up, and tossed it in the ol CS9. I also found a stainless winged disconnector to replace my plastic one, should be delivered by Friday. Still looking for stainless .304Ē trigger


Sent from my iPhone using Tapatalk

Last edited by Mercs; 04-16-2018 at 05:04 PM.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 04-16-2018, 05:05 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

I watched the first 15 minutes of Boondock Saints the other day. That was as much as I could stand before it got too silly even for me. And I love Boston set movies.

Quote:
Originally Posted by Big Shrek View Post
Other benefits are being able to get all down & funky like Papa in Boondock Saints...
On a more serious note, will the 40xx series triggers fit in a CS9? If so, I might be able to help Mercs out.
__________________
Can open, worms everywhere.

Last edited by GaryS; 04-16-2018 at 10:12 PM.
Reply With Quote
  #12  
Old 04-17-2018, 12:18 AM
JohnHL JohnHL is offline
SWCA Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Aug 2013
Location: High Ridge, Mo.
Posts: 1,406
Likes: 2,841
Liked 1,396 Times in 674 Posts
Default

As long as it is a TDA (SA/DA) trigger, 1st, 2nd, 3rd gen; blue, stainless; forged, MIM; wide, narrow...
They will all work.

John

Last edited by JohnHL; 04-17-2018 at 12:43 PM.
Reply With Quote
  #13  
Old 04-17-2018, 01:59 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

I *think* it is TDA, but I'm not 100% sure. It's part of a small bunch of 3rd Gen internal parts I bought. The ad said 4003, 4006, 4046, so who knows?

The hint that makes me think it's TDA is that in the same bunch there are a Ejector/Magazine Depressor, Firing Pin Safety Lever, and Sear Release Lever. I don't think that the DAO guns have the Sear Release Lever, but have a spacer instead.

I'll just post a picture when the parts arrive and post it here. That's if Mercs is interested.

Quote:
Originally Posted by JohnHL View Post
As long as it is a TDA (SA/DA) trigger, 1st, 2nd, 3rd gen; blue, stainless; forged, MIM; wide, narrow...
They will all work.

John
__________________
Can open, worms everywhere.
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 04-17-2018, 02:08 PM
ISCS Yoda's Avatar
ISCS Yoda ISCS Yoda is offline
US Veteran
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 4,669
Likes: 1,048
Liked 4,998 Times in 2,056 Posts
Default

Very clever. I need to look at a picture of my CS-9 right now to see if it has an ambi or not......

Nope....




I only use it as a decocker, anyway, so I never pay attention to the other side of the gun. I load it, rack it, decock it, put the decocker on fire (I don't even think of it as a safety), drop the magazine and insert one more round, put it back in, and I'm good to go. It has a long, double action, "revolver's trigger", so putting it on safe just gives me something extra to think about and I don't need that if I need to shoot - especially because I'm a revolver guy first.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 04-17-2018, 02:35 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

I think it's only the stainless version (some of them) that have the ambi safety. Of course, we are talking about S&W, so the only rule with 3rd Gens is that there is no rule with 3rd Gens.

I think I've seen one stainless version in the wild that had an ambi safety/decocker.

If I were ever to own one again and it had an ambi safety, I'd replace it.

Quote:
Originally Posted by ISCS Yoda View Post
Very clever. I need to look at a picture of my CS-9 right now to see if it has an ambi or not......

Nope....




I only use it as a decocker, anyway, so I never pay attention to the other side of the gun. I load it, rack it, decock it, put the decocker on fire (I don't even think of it as a safety), drop the magazine and insert one more round, put it back in, and I'm good to go. It has a long, double action, "revolver's trigger", so putting it on safe just gives me something extra to think about and I don't need that if I need to shoot - especially because I'm a revolver guy first.
__________________
Can open, worms everywhere.
Reply With Quote
  #16  
Old 04-17-2018, 02:42 PM
lhump1961's Avatar
lhump1961 lhump1961 is offline
US Veteran
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Apr 2011
Location: The Great Midwest
Posts: 2,239
Likes: 1,338
Liked 1,844 Times in 806 Posts
Default

I have found 3 SSS's but no more. I would snap up anything else if I could find it.
Attached Thumbnails
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version-single-sided-safety-jpg  
Reply With Quote
The Following User Likes This Post:
  #17  
Old 04-17-2018, 02:47 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default

Quote:
Originally Posted by GaryS View Post
I *think* it is TDA, but I'm not 100% sure. It's part of a small bunch of 3rd Gen internal parts I bought. The ad said 4003, 4006, 4046, so who knows?

The hint that makes me think it's TDA is that in the same bunch there are a Ejector/Magazine Depressor, Firing Pin Safety Lever, and Sear Release Lever. I don't think that the DAO guns have the Sear Release Lever, but have a spacer instead.

I'll just post a picture when the parts arrive and post it here. That's if Mercs is interested.


Absolutely Iím interested. Iím just looking for a clean stainless one thatíll fit. Much appreciated Gary!


Sent from my iPhone using Tapatalk
Reply With Quote
  #18  
Old 04-17-2018, 04:28 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

I'll post a picture so that JohnHL or someone else who can tell us for sure. That being said, we can do the rest by PM after we know.

Gary

Quote:
Originally Posted by Mercs View Post
Absolutely Iím interested. Iím just looking for a clean stainless one thatíll fit. Much appreciated Gary!


Sent from my iPhone using Tapatalk
__________________
Can open, worms everywhere.
Reply With Quote
The Following User Likes This Post:
  #19  
Old 04-17-2018, 05:23 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default Replaced the Ambi Safety on my CS9 Chiefs Special with LS version

I just freshened up the old chap with some red Loctite. Good old gunsmithing trick, this should last awhile



Sent from my iPhone using Tapatalk

Last edited by Mercs; 04-17-2018 at 05:25 PM.
Reply With Quote
The Following 2 Users Like Post:
  #20  
Old 04-19-2018, 07:10 PM
jsbethel jsbethel is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Sep 2005
Location: KY
Posts: 1,257
Likes: 9
Liked 710 Times in 430 Posts
Default

I was strangely able to procure a blued single-sided safety body as well as a low-profile slide stop from Numrich this week.
Attached Thumbnails
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version-3913tsw1-jpg   Replaced the Ambi Safety on my CS9 Chiefs Special with LS version-3913tsw2-jpg  
Reply With Quote
The Following 2 Users Like Post:
  #21  
Old 04-20-2018, 09:15 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default

Quote:
Originally Posted by jsbethel View Post
I was strangely able to procure a blued single-sided safety body as well as a low-profile slide stop from Numrich this week.


Bravo!


Sent from my iPhone using Tapatalk
Reply With Quote
  #22  
Old 04-20-2018, 09:31 PM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

As of right now, they have both blued and stainless low profile slide stops for the 39xx compacts. They also have the low profile slide stop in black for the 45 3rd Gens.

Quote:
Originally Posted by jsbethel View Post
I was strangely able to procure a blued single-sided safety body as well as a low-profile slide stop from Numrich this week.
__________________
Can open, worms everywhere.
Reply With Quote
  #23  
Old 05-02-2018, 10:52 AM
GaryS's Avatar
GaryS GaryS is offline
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Nov 2009
Location: MA
Posts: 7,685
Likes: 5,384
Liked 9,803 Times in 4,027 Posts
Default

I bought two for the 39xx series, but forgot to buy one for the 45xx. I might go back and do that. They were running a free shipping special on orders over $75.00. That might be for dealers only, but I'm not sure.

If you have a C&R FFL, they will give you dealer pricing, as will Brownells. Midway used to, but doesn't any longer.

Quote:
Originally Posted by jsbethel View Post
I was strangely able to procure a blued single-sided safety body as well as a low-profile slide stop from Numrich this week.
__________________
Can open, worms everywhere.
Reply With Quote
  #24  
Old 05-15-2018, 05:13 PM
Mercs Mercs is online now
Member
Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version Replaced the Ambi Safety on my CS9 Chiefs Special with LS version  
Join Date: Feb 2018
Posts: 104
Likes: 99
Liked 190 Times in 64 Posts
Default Replaced the Ambi Safety on my CS9 Chiefs Special with LS version

I melted my controls. I wonít need them in a defensive situation. Carries MUCH better now!



Sent from my iPhone using Tapatalk

Last edited by Mercs; 05-15-2018 at 06:03 PM.
Reply With Quote
The Following User Likes This Post:
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Turning Ambi-safety into a single sided safety? ziplock Smith & Wesson M&P Pistols 4 05-09-2015 04:15 PM
WTS Chiefs Special 3" Target version, 615 made! tmichael GUNS - For Sale or Trade 2 12-07-2014 11:47 PM
Chief's Special CS45 Ambi Safety, Hammer Casey Willett Smith & Wesson Semi-Auto Pistols 9 02-17-2013 09:19 PM
Ambi-Safety Mod CPTBeaker Smith & Wesson M&P 15-22 9 01-14-2011 08:21 PM
Ambi.safety on M&Ps deanodog Smith & Wesson M&P Pistols 3 07-16-2009 02:39 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:03 AM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
© S-W Forum, LLC 2000-2018
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)