Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Reply
 
Thread Tools Display Modes
  #1  
Old 12-29-2019, 10:47 AM
mainegrw mainegrw is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Dec 2015
Posts: 538
Likes: 616
Liked 1,014 Times in 256 Posts
Default Model 39 Aftermarket Mags? And another question...

I picked up a used Model 39-2 the other day that came with 7 magazines and a B-Square optics mount. What I'm curious about are the mags that came with it: 2 are factory mags, the other 5 appear to be aftermarket, with no markings, and 2 different styles of follower in them. They also have much longer floor plates on them than the factory mags, sticking out beyond the front of the grip. What I'd be interested in knowing is who made them, how reliable they might be, and why such a long floor plate? (Ease of reloading?) They honestly dont appear as if they were used that much, if at all. Pictures are attached below, the last two are of one of the factory mags for reference.

On a side note, this old gal has some minor condition issues, with minor pitting and finish loss. The most worrying thing however I discovered while cleaning the gun. I will note that the gun was filthy and caked up with enough **** to merit a full frame disassembly and detail cleaning. When I got to the slide however, after scrubbing the **** out of every recess, I dropped a couple drops of oil into the firing pin hole on the breach face, and depressed the firing pin a few times to work it in. When I did this, out came a blood red muck. It doesnt look like rust, and the firing pin itself still looks fine, but it has me concerned. Anybody have a quick and easy guide to disassembly of the the slide to remove the firing pin and spring? I've stripped many S&W frames, just never any slides.

Thanks and Happy New Year!

Sent from my SM-N976V using Tapatalk
Reply With Quote
  #2  
Old 12-29-2019, 11:18 AM
stansdds stansdds is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Apr 2007
Location: Virginia
Posts: 8,712
Likes: 19,273
Liked 11,732 Times in 5,350 Posts
Default

Those non-S&W mags are ProMag magazines. They may or may not fit or function as well as genuine S&W mags. I would not rely upon ProMag magazines for anything other than range use, too much history of failures with ProMag's magazines. Why they put an extended floor plate on their Model 39 magazines is a mystery, as it serves no purpose.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 12-29-2019, 11:26 AM
gmborkovic gmborkovic is online now
SWCA Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Feb 2014
Location: VA & SoFL
Posts: 8,643
Likes: 469
Liked 5,692 Times in 3,185 Posts
Default

Mr, grw, I have found the S&W mags are marked on the base plate with S&W and some times 9mm. And there are short and long base plates.
The new followers are plastic and the older ones are steel, either flat or figure 8. Your other mags appear to be Pro Mag. Never owned one.
As far as slide and FP clean, been to long ago to remember.
__________________
Mike 2796
SoFo Bunch member
Reply With Quote
The Following User Likes This Post:
  #4  
Old 12-29-2019, 11:41 AM
WR Moore WR Moore is offline
Member
 
Join Date: Oct 2006
Posts: 6,580
Likes: 1,787
Liked 5,342 Times in 2,685 Posts
Default

Removing the firing pin isn't all that hard. You'll need a couple of small punches, small screwdriver with a thin blade and possibly a gallon size zip-lock bag.

If you press the firing pin forward, you can rotate the safety/decocker down toward the "safe" mark while pulling outward on it. It should slide out of it's bore in the slide. You might have to wiggle it back and forth a bit. HOWEVER, there's a spring and plunger in the safety that you need to make sure you don't lose. That's where the large clear plastic bag comes in. Do your work in that.

Clean up the firing pin channel and all the various parts. Lightly lube and reassemble. Again, be very careful you don't lose the spring & plunger. The small screwdriver will be very handy for getting the spring and plunger into the safety bore. It gets a bit more complex when dealing with later generation pieces with the firing pin safety block.

You can check with gunpartscorp dot com for both skematics and possible magazine parts.

Last edited by WR Moore; 12-29-2019 at 11:43 AM.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 12-29-2019, 11:50 AM
Bozz10mm's Avatar
Bozz10mm Bozz10mm is offline
US Veteran
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Jun 2013
Location: Georgetown, Tx
Posts: 2,344
Likes: 2,562
Liked 2,871 Times in 1,185 Posts
Default

You can get new mags for it at Midway USA for $18.73 ea. They also have 9 round mags that will fit it for $10 more.

Never mind, those were Pro mags.

These claim to be factory original stainless 9 round mags for $28.53 ea

Smith & Wesson Mag S&W 39 439 539 639 909 952 3904 3906 3944 3946 9mm

Last edited by Bozz10mm; 12-29-2019 at 11:55 AM.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 12-30-2019, 08:55 AM
mainegrw mainegrw is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Dec 2015
Posts: 538
Likes: 616
Liked 1,014 Times in 256 Posts
Default

I thought these might be Promags, however the lack of markings threw me off. Just glad they're not Triple K mags. This gun is to be for rage use only, so no real worries about function issues in a life or death situation, but still a sucky time at the range of the gun doesn't run right.

As for my other question on slide disassembly, I found a video on youtube that walks through the disassembly of 3rd gen slides. Would I be correct in my understanding that the process is essentially the same, save for the firing pin block and right side safety lever? An analysis of Numrich's parts diagram and parts list seems to suggest so as well. Can anyone confirm this?

Sent from my SM-N976V using Tapatalk
Reply With Quote
The Following User Likes This Post:
  #7  
Old 12-30-2019, 08:58 AM
squidsix squidsix is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Jan 2006
Location: Southern Maine
Posts: 3,527
Likes: 1,902
Liked 5,626 Times in 1,543 Posts
Default

Yes the process is the same.
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 12-30-2019, 08:59 AM
mainegrw mainegrw is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Dec 2015
Posts: 538
Likes: 616
Liked 1,014 Times in 256 Posts
Default

Quote:
Originally Posted by squidsix View Post
Yes the process is the same.
Excellent, thank you!

Sent from my SM-N976V using Tapatalk
Reply With Quote
  #9  
Old 12-30-2019, 11:32 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,390
Liked 8,046 Times in 3,652 Posts
Default

The "blood red muck" in the firing pin hole ... my first bottle of Lucas Gun Oil was a blood red color and rather thick . I wonder if the original owner had flooded the hole with thick red Lucas Gun Oil and some congealed in there .
I've always thought the Lucas Gun Oil looked , felt and smelled like Lucas Automatic Transmission Fluid !
Gary
__________________
Certified Cajun
NRA Member
Reply With Quote
The Following User Likes This Post:
  #10  
Old 12-31-2019, 08:26 AM
BigBoy99's Avatar
BigBoy99 BigBoy99 is online now
US Veteran
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Mar 2009
Location: SE Wisc.
Posts: 3,489
Likes: 782
Liked 6,601 Times in 2,081 Posts
Default

Quote:
Originally Posted by stansdds View Post
Those non-S&W mags are ProMag magazines. They may or may not fit or function as well as genuine S&W mags. I would not rely upon ProMag magazines for anything other than range use, too much history of failures with ProMag's magazines. Why they put an extended floor plate on their Model 39 magazines is a mystery, as it serves no purpose.
Maybe the extended floor plates are an easy way to readily identify the ProMags from the original S&W magazines. Quick way to sort the "good" from the "bad".
__________________
Bill
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 12-31-2019, 11:01 AM
stansdds stansdds is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Apr 2007
Location: Virginia
Posts: 8,712
Likes: 19,273
Liked 11,732 Times in 5,350 Posts
Default

Quote:
Originally Posted by BigBoy99 View Post
Maybe the extended floor plates are an easy way to readily identify the ProMags from the original S&W magazines. Quick way to sort the "good" from the "bad".
That could be.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 01-05-2020, 12:08 AM
Classic Radio99 Classic Radio99 is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Jan 2020
Location: DuPage Co., IL, US
Posts: 63
Likes: 10
Liked 76 Times in 34 Posts
Default

Quote:
Originally Posted by gwpercle View Post
The "blood red muck" in the firing pin hole ... my first bottle of Lucas Gun Oil was a blood red color and rather thick . I wonder if the original owner had flooded the hole with thick red Lucas Gun Oil and some congealed in there .
I've always thought the Lucas Gun Oil looked , felt and smelled like Lucas Automatic Transmission Fluid !
Gary
There's also a homemade clean/lube concoction called "Ed's Red" with recipes floating around on the internet. One of the components is ATF, which would also give you the red color.
The previous owner may have dunked the slide in some of that stuff and let it soak, but never got it all out of there.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 01-05-2020, 08:41 AM
mainegrw mainegrw is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Dec 2015
Posts: 538
Likes: 616
Liked 1,014 Times in 256 Posts
Default

Update: I spent a couple hours today stripping down the slide to inspect and clean the firing pin and its channel. I got a little worried because the ooze started to seep out under the rear sight and out the rear of the firing pin, where the coloration took on a slightly brownish hue, making me worried that I actually had a corrosion issue.

Stripping down the slide was pretty easy, I did most of it inside a zip lock bag to contain the parts, yet I still lost and spent about an hour of the process searching for the detent safety plunger spring which disappeared when I gently plucked it from its recess. Turns out while I was looking all over the surrounding floor, it had falling into the firing channel and was still with the slide thank God!

I would also like to note: While the disassembly of the slide is largely the same as as the third gen guns, the big difference is with the location of the safety detent plunger. I was expecting the plunger to be located in the safety lever itself, as detailed in the parts schematic on Numrich's site and in the aforementioned video of third gen slide disassembly I found on youtube. Instead it is located in the right side of the slide (the side without the lever), hence how I managed to loose the spring into the firing pin channel.

Anyway, after stripping down the slide what I found was that the previous owner must have packed the channel with some sort of thick red grease. It was caked all over everything, and very sticky. The grease looked a lot like bearing grease, or like what you might find in a general purpose grease gun. I wonder if that may have lead to light striking issues with the amount packed in there... (grease induced hydro-lock?) I went ahead and thoroughly scrubbed everything clean and reassembled with a light coat of Rand HAWG grease, my preferred flavor of red grease for guns. Now, no more ooze, and everything is nice and smooth! Thanks all for the thoughts and ideas! It is greatly appreciated!

Sent from my SM-N976V using Tapatalk

Last edited by mainegrw; 01-05-2020 at 08:44 AM.
Reply With Quote
The Following 5 Users Like Post:
  #14  
Old 01-05-2020, 09:23 AM
NevadaBob's Avatar
NevadaBob NevadaBob is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Apr 2012
Location: Reno, NV
Posts: 421
Likes: 563
Liked 206 Times in 130 Posts
Default

When I had my 39 I bought an extra mag from Numrich. It's their brand new reproduction mag. Worked great.
But...for kicks I bought a ProMag knowing full well the history of PM's! To my surprise it worked great as well.
Reply With Quote
The Following User Likes This Post:
  #15  
Old 01-05-2020, 09:52 AM
stansdds stansdds is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Apr 2007
Location: Virginia
Posts: 8,712
Likes: 19,273
Liked 11,732 Times in 5,350 Posts
Default

I would not use any sort of grease in the firing pin tunnel area. If really worried about corrosion, a very, very thin film of oil, Corrosion X or Rem Oil.
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 01-05-2020, 10:11 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,390
Liked 8,046 Times in 3,652 Posts
Default

Lucas Red-N-Tacky is a red color , lithium bearing grease , very thick and sticky ...hence the name Red and Tacky .
It's an excellent grease and a probable candidate for what the original owner used .
Glad there was no rust and you didn't loose any flying small bits...I hate when that happens .
Gary
__________________
Certified Cajun
NRA Member

Last edited by gwpercle; 01-05-2020 at 10:13 AM.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 01-05-2020, 10:20 AM
mainegrw mainegrw is offline
Member
Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question... Model 39 Aftermarket Mags? And another question...  
Join Date: Dec 2015
Posts: 538
Likes: 616
Liked 1,014 Times in 256 Posts
Default

Quote:
Originally Posted by stansdds View Post
I would not use any sort of grease in the firing pin tunnel area. If really worried about corrosion, a very, very thin film of oil, Corrosion X or Rem Oil.
I used a very thin film, not much more than a little Lucas gun oil would leave.

Sent from my SM-N976V using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aftermarket mags any good? SugarMagnolia Smith & Wesson M&P 15-22 11 05-20-2017 11:47 AM
aftermarket m&p 17rnd mags? harry5332 Smith & Wesson M&P Pistols 6 02-13-2014 02:38 AM
Aftermarket Mags Krufam Smith & Wesson M&P 15-22 22 08-09-2013 11:15 PM
Aftermarket mags for MP15-22? DavidRSA Smith & Wesson M&P 15-22 6 03-09-2010 10:50 AM
Aftermarket mags xx1trackxx Smith & Wesson M&P 15-22 5 02-19-2010 04:21 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 12:06 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)