|
|
|
02-18-2020, 01:59 PM
|
US Veteran
|
|
|
Join Date: Sep 2005
Location: Tennessee
Posts: 373
Likes: 55
Liked 400 Times in 142 Posts
|
|
Quote:
Originally Posted by blackemmons
So why doesn't SW put a " $11 Volquartsen extractor" in the 41 if that's the cure? After 168 years in business you would think they would be as smart as Volquartsen.
|
Prezactly!!
And why can’t they put good triggers in their M&P’s and Match Grade triggers in the “Pro Series” or “Performance Center” guns. They don’t do it because we buy the guns anyway and spend $169 with Apex for a trigger.
The “You need to buy an old one” is non-sense also. That’s perpetuated by the people that have them and want to think they are more “valuable” than a new one. I advertised and tried to buy a used Model 41. I could buy new at the time (last November) from KY gun for $1030. But everyone that sent me information either wanted that much or more, or they were in bad shape. I ended up buying a Ruger Mark IV Competition.
I recently watched the threads on this forum and others about the problems with the Shield EZ. Plenty of people had, and still have problems. But the threads became crazy with people that wanted to post they had one, and it didn’t have any problems. It’s the same with CS. I was one of those people that had been treated well by CS for years. Until I wasn’t. Hopefully that won’t happen to others but based on what I have seen it very well could.
Good CS no longer exists in most places. S&W appears to have headed down that path. But who knows; maybe someone could fix the problem and take them back to where they should be.
|
02-18-2020, 03:46 PM
|
Member
|
|
|
Join Date: Nov 2017
Posts: 56
Likes: 0
Liked 23 Times in 16 Posts
|
|
Quote:
Originally Posted by first-model
On the advice of those that know far more about 41's than I do, I held out and waited to find a gently used 41 from the first few years of the gun's production. What I was told was that before about serial number 75,000, the guns were essentially handmade and hand tuned. Mine has a 42xx serial number and dates to February 1958.
I've probably put 2,000 rounds or so down the pipe, and I could count on one hand how many FTF's and FTE's I've had. As it happens I've been mostly shooting CCI standard velocity ammo, which (according to this thread) was the preferred factory ammo. I knew that I should be shooting standard velocity ammo through it, though, so I guess I got lucky in terms of ammo manufacturer.
My 41 is an absolute joy to shoot, so much so that I sold my Rugers, my Colt Woodsman, and many other fine .22's that were almost as superb as my 41.
I've handled a few of the new 41's and while they look the same, they don't quite feel the same in hand. Something about the weight and the balance. I'm not sure how that translates into the actual build quality, but by the OP's accounts, the 41's now are nothing like they were back in the day.
Mike
|
You are probably right Mike, I should have purchased a "gently used" one. All hindsight now and my bad. But, I'm not taking another bite at it.
As for other 22lr pistols, I wouldn't trade my 1952 Colt Match Target for any SW 41. 😊
|
The Following User Likes This Post:
|
|
02-18-2020, 04:53 PM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: Oro Valley, Arizona
Posts: 2,370
Likes: 497
Liked 943 Times in 518 Posts
|
|
Quote:
Originally Posted by blackemmons
No more SW's for me, unless it old.
|
I feel your pain. I had a new mid-1990s era M41 that was a great shooter, until it wasn't. Around 2002 or so, it started to malfunction. The trigger would not reset. It made two trips to S&W and came back with a list of things they had replaced, all for naught. It continued to malfunction in the same way. I finally sold it and the five 12 round magazines that I had accumulated for action pistol competition. My impression of S&W service was that they had a bunch of rookies working on the guns who did not really know how to diagnose problems. They were just guessing, and replacing parts. And not testing to see whether they had solved the problem or not.
Around 2006 I purchased a used early 1980s era M41 after test firing it with the original owner. I competed in action shooting with it for 3 years. I don't shoot it much anymore, but it has never malfunctioned, not even once (touch wood). I use SV ammo only.
In the past year or so, I have purchased five guns from a large volume online dealer. Three revolvers, two of them were Smiths and one was a Ruger single action. All three had to make trips back to the factory for initial quality or functional problems. Ruger still malfunctioned after two trips (the cylinder latch would not hold) and I had to fix it using aftermarket parts. Both Smiths came back from the factory with finish damage (little dings and scratches).
The other two guns I had bought online were S&W polymer framed auto pistols, and had absolutely no issues with either of them.
My guess is that the polymer guns are easier to manufacture since there are fewer parts to assemble, and some of them are molded to net shape or near net shape. Revolvers and other all-steel guns have alot more machine parts to assemble. Some of those parts are outsourced and apparently the quality plan is not adequate.
I have used online vendors to save money, but I would not do that again. I would not buy a S&W product unless I could thoroughly inspect it and even disassemble it. Otherwise, you are asking for trouble IMHO.
|
02-18-2020, 05:13 PM
|
Member
|
|
|
Join Date: Nov 2017
Posts: 56
Likes: 0
Liked 23 Times in 16 Posts
|
|
Quote:
Originally Posted by andyo5
I feel your pain. I had a new mid-1990s era M41 that was a great shooter, until it wasn't. Around 2002 or so, it started to malfunction. The trigger would not reset. It made two trips to S&W and came back with a list of things they had replaced, all for naught. It continued to malfunction in the same way. I finally sold it and the five 12 round magazines that I had accumulated for action pistol competition. My impression of S&W service was that they had a bunch of rookies working on the guns who did not really know how to diagnose problems. They were just guessing, and replacing parts. And not testing to see whether they had solved the problem or not.
Around 2006 I purchased a used early 1980s era M41 after test firing it with the original owner. I competed in action shooting with it for 3 years. I don't shoot it much anymore, but it has never malfunctioned, not even once (touch wood). I use SV ammo only.
In the past year or so, I have purchased five guns from a large volume online dealer. Three revolvers, two of them were Smiths and one was a Ruger single action. All three had to make trips back to the factory for initial quality or functional problems. Ruger still malfunctioned after two trips (the cylinder latch would not hold) and I had to fix it using aftermarket parts. Both Smiths came back from the factory with finish damage (little dings and scratches).
The other two guns I had bought online were S&W polymer framed auto pistols, and had absolutely no issues with either of them.
My guess is that the polymer guns are easier to manufacture since there are fewer parts to assemble, and some of them are molded to net shape or near net shape. Revolvers and other all-steel guns have alot more machine parts to assemble. Some of those parts are outsourced and apparently the quality plan is not adequate.
I have used online vendors to save money, but I would not do that again. I would not buy a S&W product unless I could thoroughly inspect it and even disassemble it. Otherwise, you are asking for trouble IMHO.
|
" I would not buy a S&W product unless I could thoroughly inspect it and even disassemble it."
I did purchase both of the 41's over the counter. I examined them to the degree that I could but of course they were new so the FFL wasn't about to let me take them to the range and run a couple of hundred rounds through them. I consider myself fortunate that the dealer gave me my money back. I don't think that is a too common thing. But, I have purchase quite a few guns from them and they want my continued business.
Thanks to them I am not still running back and forth to FedEx and calling SW every other day. I'm just pleased that it is over.
I'll stick with my other SW 22's, the 617, Victory and four others. They all work great............ as of now. Thanks.
|
The Following User Likes This Post:
|
|
02-18-2020, 09:20 PM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 17,799
Likes: 7,843
Liked 25,702 Times in 8,685 Posts
|
|
Quote:
Originally Posted by blackemmons
So why doesn't SW put a " $11 Volquartsen extractor" in the 41 if that's the cure? After 168 years in business you would think they would be as smart as Volquartsen. I'm always amazed at how aftermarket folks take the time to get it right. Thanks chief38
|
Because the Volquartsen extractor is forged, higher quality and costs much more than the .25 cent stamped out part S&W used. I know that they are capable - just not willing. Just like car manufacturer's will save .10 on a part , but 10 cents x how ever many cars they make add to the profit.
Last edited by chief38; 02-18-2020 at 09:23 PM.
|
02-19-2020, 12:44 PM
|
Member
|
|
|
Join Date: Jan 2007
Location: NC Montana
Posts: 853
Likes: 90
Liked 483 Times in 201 Posts
|
|
Sorry for your troubles. I'm surprised that S&W didn't fix it correctly. Makes you wonder if they know what they're doing. Maybe just going thru the motions
I have all older Smiths except for a M&P22C that I got last year.
3 of us used to shoot golf balls for $$ with 22 pistols. If you were having a bad day, it could get expensive. 2 of us used Ruger semi-autos and 1 used a H-S. We were pretty well matched. In the mid-70s, I got a 41 (5 1/2") and practiced with it a lot. I started walking away with the $$. The other 2 guys then bought 41s (7 1/2"ers) trying to catch me.
The point of the story is that all 3 of the 41s were totally reliable. I don't remember a failure of any kind. We mostly used HV ammo but used anything really. We weren't aware of the "use SV" recommendations. I don't see any damage to the slide, chamber, etc...
After about 25 years I DID need to replace the recoil spring on mine, it started to fail to eject---- Only problem I've ever had. Many 1000s of rounds thru it.
|
02-20-2020, 12:54 AM
|
Member
|
|
|
Join Date: Feb 2017
Posts: 184
Likes: 17
Liked 135 Times in 63 Posts
|
|
My new PC 41 is more tolerant of different ammunition vs the early model 41. The older one demands standard and target speed ammunition. I would not give up on a 41. I have not tried CCI in my 41s. I know that CCI was not that good in my K 22s. They prefer Remington gold. The gold gives easier extraction than CCI in revolvers. SK Target ammunition is good in revolvers and auto. J frame kit guns give stiff extraction with CCI. I thought that was due to pressure in high speed. Keep trying other brands and grades but look for target velocity and or target grade.
Sent from my iPhone using Tapatalk
|
03-04-2020, 06:15 PM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: Oro Valley, Arizona
Posts: 2,370
Likes: 497
Liked 943 Times in 518 Posts
|
|
This...
Model 41 maintenance
and this...
The Dark Side of Smith & Wesson
I agree with what Chuck has to say about S&W quality. Not sure I agree about his comments on their designs. I think they have some of the best designs on the market, especially revolvers. It isn't the design, it is the execution and their apparent disrespect for their customers.
Last edited by andyo5; 03-04-2020 at 06:18 PM.
|
The Following User Likes This Post:
|
|
03-11-2020, 12:04 PM
|
US Veteran
|
|
|
Join Date: Sep 2005
Location: Tennessee
Posts: 373
Likes: 55
Liked 400 Times in 142 Posts
|
|
Quote:
Originally Posted by andyo5
It isn't the design, it is the execution and their apparent disrespect for their customers.
|
Exactly.
I don’t have a problem with their design, or even their quality. Every manufacturer has issues now and then. It is how they handle it with they are made aware of a problem. I always thought Smith & Wesson was the gold standard for customer service; sadly, not anymore.
I hate it when writers don’t put a date on their reviews. It appears that “The Dark Side of Smith & Wesson” hit piece was around 2011?
|
03-19-2020, 11:55 AM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: State of Misery
Posts: 964
Likes: 1
Liked 44 Times in 33 Posts
|
|
I have never owned a 41 but always lusted after one, but price was for years a reason for me not buy. Then it was realization that I was never going to shoot competition so why spend the money. But now at 75 in July and dealing with aftermath of lymphatic cancer and no longer allowed to shoot rifles due to CHEMO port in my right chest. So I'm thinking maybe I'll buy one as I found 2 of the 12 round mags that came with my 2206 I bought new, and since I've got 3 rifles I'll be getting rid of I may tell the local gun shop I want one. I'll trade in the following a Scout Rifle in 7.62/308, Browning 222 A-bolt, Auto Ordnance M-1 30 Carbine and a CZ 512 in 22WMR even though I'll take a beating for the trade as I'm in the Ozark's only the 308 would bring or be a good resale gun. but such is life. The Ruger has only had 5 rounds at most fired, about 30 for the 222 Browning about 30 for the CZ 22 WMR, and about 300 or 400 hundred for the AO 30 Carbine that has only one FF due to a bad primer.
__________________
Cranky Old Retired USN Guy
|
03-20-2020, 09:02 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: bluesky
Posts: 1,062
Likes: 237
Liked 279 Times in 148 Posts
|
|
Quote:
Originally Posted by Old Navy
I have never owned a 41 but always lusted after one,...
... I'll take a beating for the trade as I'm in the Ozark's ....
|
Hold on Ol'Navy... I had a port installed too and had to stop shooting for about 1-2 years... then I had the port removed when all the chemo and other tests were pretty much over... after a short heal I can shoot rifle again. I've spent 8 or more solid hours shooting 308 at the range (of course after loosing 60 lbs i now use a decelerator pad).
Also.. don't you still live in a free state where you can sell your rifles in a private sale? I'd guess you have the background to spot a shady deal when you see one. Guns don't eat anything, so if it takes a little time to get your price, just be patient, the right guy will come along... and you may be giving away a few hundred dollars or lots of fun by trading them to a dealer. My advice is to find a nice gun to buy from an individual privately and to either keep or sell your rifles yourself. Also get that port removed as soon as you don't need it anymore...
good luck.
Last edited by 125JHP; 03-20-2020 at 09:05 AM.
|
03-20-2020, 09:15 AM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: State of Misery
Posts: 964
Likes: 1
Liked 44 Times in 33 Posts
|
|
Quote:
Originally Posted by 125JHP
Hold on Ol'Navy... I had a port installed too and had to stop shooting for about 1-2 years... then I had the port removed when all the chemo and other tests were pretty much over... after a short heal I can shoot rifle again. I've spent 8 or more solid hours shooting 308 at the range (of course after loosing 60 lbs i now use a decelerator pad).
Also.. don't you still live in a free state where you can sell your rifles in a private sale? I'd guess you have the background to spot a shady deal when you see one. Guns don't eat anything, so if it takes a little time to get your price, just be patient, the right guy will come along... and you may be giving away a few hundred dollars or lots of fun by trading them to a dealer. My advice is to find a nice gun to buy from an individual privately and to either keep or sell your rifles yourself. Also get that port removed as soon as you don't need it anymore...
good luck.
|
Yes MO is a free state, but at 75 and with sever arthritis of hands now and all the other problems of old age I'll be lucky if I can shoot a 22 pistol, also I am stage 4 Non Hodgins Lymphoma that is very aggressive and had got into thigh bone but not in merrow. In other words I'm terminal but have no idea when it will start up again or if Covid-19 will get me.
__________________
Cranky Old Retired USN Guy
|
03-20-2020, 10:43 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Location: bluesky
Posts: 1,062
Likes: 237
Liked 279 Times in 148 Posts
|
|
I was stage IV base of tongue and it was wrapped around my carotid artery- Dr. at Mayo Clinic said he gave me 2 week max or 15% chance of surviving the operation and that his advice was that I go home and hope I die in my sleep.... my answer was. 'you said 15%'... that was in 2010... so don't give up just yet.
Last edited by 125JHP; 03-20-2020 at 10:45 PM.
|
The Following User Likes This Post:
|
|
03-21-2020, 05:28 AM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: State of Misery
Posts: 964
Likes: 1
Liked 44 Times in 33 Posts
|
|
Not given up on keeping cancer at bay, it's the arthritis of hands, shoulders, feet, knee's along with stannous of spine. It's 04:20 arthritis woke me up at 04:00 and now hands are hurting along with back so have a good day 125 JHP and may God keep you safe and enjoying the guns.
__________________
Cranky Old Retired USN Guy
|
03-21-2020, 11:55 AM
|
Member
|
|
|
Join Date: Aug 2012
Location: Anthem,Arizona
Posts: 256
Likes: 129
Liked 117 Times in 61 Posts
|
|
I make it up to Lake of the Ozark every couple weeks and may be interested in the CZ .22mag. Where about are you?
Is it the 452? I’m old and cranky too.
Last edited by kleiss1; 03-21-2020 at 11:58 AM.
|
03-21-2020, 12:19 PM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: State of Misery
Posts: 964
Likes: 1
Liked 44 Times in 33 Posts
|
|
No, it's a 512 and already gone locally. A 16.5" 22 Mag automatic rifle is a hot gun for poachers and/or poor trying to keep meat in the house year around.
__________________
Cranky Old Retired USN Guy
|
The Following User Likes This Post:
|
|
04-06-2020, 09:18 PM
|
|
Member
|
|
|
Join Date: Aug 2007
Location: State of Misery
Posts: 964
Likes: 1
Liked 44 Times in 33 Posts
|
|
Well my 2 mounts came today had to buy a 60 and 62, the 60 for $6 was for the correct length screws and 62 was for the rail to hold the scope but it comes with too short of screws and the 60 even though it only has three holes it comes with four screws. So I just take and put the screws from 60 into 62 on the 41 and low and behold all is right in the mount. and I just throw away the $6 mount.
My 1978 Leupold M8 4x sure looks good on the gun, I can't wait to sight it in tomorrow if it don't rain.
__________________
Cranky Old Retired USN Guy
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|