Usually, this is due to a damaged or worn edge on the button at the end of the guide rod. The edge can sometimes be peened back (re-sharpened) so that it will catch in the notch. Purchasing a new guide rod would be another alternative.
If the rod is ok, the notch in the barrel can be restored by carefully re-cutting with an end mill. If the cavity is re-cut/cleaned up with an end mill or similar, be sure to use the correct diameter tool, which is approx. 3/8", or .375", and maintain the correct profile and location.
__________________
Ret. LE, FA Instr, S&W Armorer
Last edited by armorer951; 02-08-2020 at 02:42 PM.
|