S&W Semi-Auto Picture Thread

[03hemi]

Don't think I put a family picture of my S&W autos here.

[CDKJudoka]

It's been getting warmer out so I pressed this into service. I swapped the sights for Trijicon SA08s, did a detail strip and clean and removed the magazine disconnect. The mag it came with kept double feeding, so that one has been put away, but the two 12rders that I bought seem to be working just fine. About 300rds (200 124gr NATO and 100 Federal HST 124gr) and she ran like a top. The hammer spring and polish of the drawbar is next on the agenda.

[jughed440]

Latest find is the 1006 on the right.....and a transitional 4506

[Hatecraft]

Finally got my "Reservoir Dogs" gun.

[Guevera]

[Hersh328]

My babies.

I just picked up the 6906 a couple weeks ago, working on fixing her up, but she's already a nice shooter. I know this is the semi board, but I love my revolvers, too. And my long guns.

[iowaMallard]

2.0 compact in a Ragnarok paddle holster ready for the range.

[veeklog1]

Originally Posted by Hersh328

My babies.

I just picked up the 6906 a couple weeks ago, working on fixing her up, but she's already a nice shooter. I know this is the semi board, but I love my revolvers, too. And my long guns.

I sent mine to S&W Performance Center who did a complete overhaul of my 6906 inside and out. Going to send my 4506 when I get back from TDY

[CDKJudoka]

Originally Posted by veeklog1

I sent mine to S&W Performance Center who did a complete overhaul of my 6906 inside and out. Going to send my 4506 when I get back from TDY

How much did that run you?

[veeklog1]

Originally Posted by CDKJudoka

How much did that run you?

I think it was somewhere between $300 to $350, but it was a complete overhaul

[CDKJudoka]

New carry rig for the 6906.

[jd2000]

Here is my latest acquisition, a low rounds 2206 in really good condition.







Really happy with it.
I had a little extraction problem with it when I got it and shot it after a fast cleaning and inspection but after a deep and proper cleaning, it has been flawless!
That will give a good deserved rest to my Victory as well.

[hammy5150]

The 5926, 4013 TSW, and 1006. All I need is a 1076 and one of those CHP 4006 TSWs and I'll be set. And maybe a 4566 too.

[Motorsporting]

I can't keep all of these numbers straight!!

[Beauetienne]

New to me. Have yet to fire it.

[v84x4]

My Carry and Backup
Smith & Wesson PC 1911 Pro Series = 24oz
Smith & Wesson 340PD = 11oz

Both have scandium Frames

[CDKJudoka]

Working from home for the most part (essential employee), but still carrying my 6906.

[joedegs]

Originally Posted by CDKJudoka

Working from home for the most part (essential employee), but still carrying my 6906.

WMMR, everything that rocks!

[4T5GUY]

I’ve posted this picture before in the “other” section but it really belongs here I suppose. These are my S&W .45’s.

I’m about there but who knows?

Thanks for looking.

Jim

[elm_creek_smith]

I gave this Model 469 and a holster to my grandson after he had issues finding a decent CCW holster for his Makarov after Oklahoma adopted "Constitutional Carry."


Sent from my XT1710-02 using Tapatalk

[Grumpyman]

My addiction so far

[tjtoolbox]

My S&W 457 and S&W 5904, Also have a S&W 422 but no picture.

[Chief Wiggums]

very simple
very standard
very reliable
M&P 2.0C
EDC

[Forte Smitten Wesson]

Here's my one and only 3rd Gen S&W Auto.




The S&W 4006TSW CHP model. Only about 10,000 of these were ever made as part of a special order by the California Highway Patrol to Smith & Wesson, years after the 4006TSW had been discontinued on the civilian market.
My example shows a bit of external finish wear, but internally it's like new, which clearly indicates that while it was carried often, it was shot very little. The gun came shipped in a factory blue clamshell case which was not original to the firearm, (they were reportedly originally shipped to the CHP in cardboard boxes) and the grips have been replaced with brand new Hogue rubber grips, meaning the original grips were most likely broken. I've been debating on whether or not to replace the Hogues with a nice pair of KSD Rosewood Grips, but they're expensive and require a grip pin which wasn't included with mine since the Hogues are secured by screws.

Overall, I'm very impressed by just how tanky the 4006TSW CHP is. The gun is big, beefy, and heavy, but considering that I purchased this as a range gun, that's a good thing because it should soak up recoil of .40 S&W nicely and outlast me at the range.

[CDKJudoka]

Same old, same old.

[rosewood]

Originally Posted by jughed440

Latest find is the 1006 on the right.....and a transitional 4506

Nice photography!

[Oldsalt66]

This is a fairly early production model M&P .40 and it’s been absolutely reliable right out of the box.

Although there appears to be a key lock in the frame there is none, but when it was manufactured all M&P frames had the provisions for the internal lock.



Model 61-2 Escort circa 1972, and despite a checkered reputation for reliability, this one runs great on CCI Mini Mags.

They should have kept making them IMO.

[Backlighting]

My EDC. A ruger Security 9 Compact.

[Oldsalt66]

[loridah]

Just picked up this little cutie. I remember when they came out back in the late 70's. A friend of mine got one and we went to shoot it. Cool little gun. Then he got the model 59. Even cooler. I cant remember all the ones I have or had. But, I also just got a model 41 .22 and 4013TSW, 6906, 4506, 6946, .22 Victory, and lots and lots of revolvers.

[Toyman]

Model 59 shipped to Las Vegas Metro May 1974

[Oldsalt66]

[prochi2k]

What started as M5906 and M5946 are now SSV look a likes.

[Miami_JBT]

Model 645



Model 4506-1



Model 4566



Model 4566TSW



Model 4566TSW

[jbtrucker]

M&P 9's and 5906

[J. W.]

Scored my first 1st Gen, a Model 39-2. My photo skills don't do the pistol justice. Overall condition is probably 90%.







Sent from my iPhone using Tapatalk

[Miami_JBT]

Latest Group Photo of the Smiths.

[sirius]

The family, including a couple who have moved away.

[Club Gun Fan]

Both of these are Club Guns. The Model 41 is a Tool Room gun that was a gift to an employee. The 39-2 was given to Wally Beinfeld.

[Miami_JBT]

Figured the S&W 645 would be the right gun for this election. An American made .45 for the 45th President.

[Frank Black]

Minty 645 .... Snagged it back in July.

[Mikedtkd]

Picked up a MINTY 3953DAO
Memphis Police trade-in, looks like it spent its career on the shelf. Almost zero wear.

[reccpd101]

Here's my contributions. Some mix and match. top 5904 slide over 3913 frame. middle 3906 slide over 439 frame. bottom 5903 slide over 5904 frame.

[prochi2k]

My S&W 3rd Gens.

[Hugo Stiglitz]

4506, 39-2 and 5906.......

[v84x4]

S&W 442 TK Customs 9mm Conversion

[Forte Smitten Wesson]

Here's my California Highway Patrol 4006TSW with my new Buck 120.

[Moo Moo]

My Third Gen collection I've picked up here in Australia. Not many survived the 2003 Handgun Buyback when the laws changed on keeping handguns with barrels under 100mm and calibres over .38 special/.357mag on a typical Cat H Target License.

[Moo Moo]

My Third Gen collection so far.

[Miami_JBT]

My new to me Model 745.





My new to meModel 5903 SSV hanging out with my Beretta 92FS Centurion.