Failure To Eject

[Skeet281]

I have a new Victory that I'm trying to get all the kinks out. The one main problem is failure to eject. I have tried many different bullets, the best being CCI Mini Mag. I keep the gun cleaned and lubed. I just put in a new extractor which I wil be shooting next week. I saw a video on You Tube, the guy said he was having the same problem, so he bent the extractor a touch, and that fixed the problem. The gun is very accurate, but is very frustrating. Any feedback would be appreciated. I really don't want to send the gun back to Smith, if there is a simple solution.

[Barrie]

Skeet281 Welcome to the forum. I would suggest bending the extractor just a wee bit so that it can pick up the fired round much easier. That usually does the trick and makes them work extremely well after that. Small Needle Nose Pliers will do the trick.

[Skeet281]

Barrie, thanks for the reply. I think I confused things, I meant to say, the You Tube guy tweaked the Ejector. The ejector is spot welded, just hope it won't pop the welds.

[Barrie]

Tandemkross also produces a very nice ejector to fit this pistol which we have heard works extremely well in the Victory model of handgun. Its had very good reviews on its working ability also.

[Skeet281]

Problem solved, I replaced the S&W extractor with a Tandomkross. B4 I couldn't make it through a mag without jams. Since the Tandomkross,220 rounds without a failure.

[Barrie]

Glad to hear, now go forth and hit them bullseye's.