Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Semi-Automatic Pistols > Smith & Wesson Semi-Auto Pistols
o

Notices

Smith & Wesson Semi-Auto Pistols Other Smith & Wesson Semi-Automatic Pistols from the 1950's to Present


Reply
 
Thread Tools Display Modes
  #1  
Old 09-07-2008, 06:59 PM
Flathead Flathead is offline
Member
6906 Info 6906 Info  
Join Date: Aug 2008
Location: Nevada
Posts: 155
Likes: 2
Liked 67 Times in 42 Posts
Default

Hello all:
Just recently bought a 6906 Stainless which I dearly love. Fabulous shooter. Has become my carry gun. Trouble is, info is elusive. I'd just like to know things like years of production, unique qualities, improvements of this model over predecessors etc. I can't find anything on the SW website short of personal gun history. Any info would be greatly appreciated.
Reply With Quote
  #2  
Old 09-07-2008, 06:59 PM
Flathead Flathead is offline
Member
6906 Info 6906 Info  
Join Date: Aug 2008
Location: Nevada
Posts: 155
Likes: 2
Liked 67 Times in 42 Posts
Default

Hello all:
Just recently bought a 6906 Stainless which I dearly love. Fabulous shooter. Has become my carry gun. Trouble is, info is elusive. I'd just like to know things like years of production, unique qualities, improvements of this model over predecessors etc. I can't find anything on the SW website short of personal gun history. Any info would be greatly appreciated.
Reply With Quote
  #3  
Old 09-07-2008, 07:12 PM
S&W Oldtimer's Avatar
S&W Oldtimer S&W Oldtimer is offline
SWCA Member
6906 Info 6906 Info 6906 Info 6906 Info 6906 Info  
Join Date: Jun 2008
Location: SW VA
Posts: 16,557
Likes: 4,647
Liked 1,645 Times in 1,283 Posts
Default

Get a copy of Standard Catalog of Smith & Wesson, 3rd edition.
__________________
Roger
Reply With Quote
  #4  
Old 09-08-2008, 06:41 PM
rushbeau rushbeau is offline
Member
6906 Info 6906 Info 6906 Info 6906 Info 6906 Info  
Join Date: Jul 2005
Posts: 35
Likes: 0
Liked 17 Times in 10 Posts
Default

Welcome to the Forum !

I purchased a 6906 a couple of years ago. After 2,000 rounds of standard-pressure 147-grain ammunition, I am thoroughly convinced my 6906 is a keeper. It's a good size for me, light, and easy to carry. The trigger is very smooth, and the pistol shoots really well.

There has been much discussion over the years on the Forum about the 6906. It seems to be a popular pistol. I searched this section of the Forum for "6906" and found several days' worth of reading (I don't rember any negative feedback about this model). Questions are always welcome.

The 6906 is a compact-frame, high capacity 9mm. It is a high-capacity version of the 3913 (it even fits the same holsters). My pistol was a former cop pistol that Smith and Wesson refurbished. It looks brand new and was made about three years ago.

I hope your pistol proves to be a keeper for you too.

Best wishes,
Rushbeau
Reply With Quote
  #5  
Old 09-08-2008, 07:49 PM
SergeantC SergeantC is offline
Member
 
Join Date: Jul 2004
Location: alexandria, virginia
Posts: 20
Likes: 0
Liked 0 Times in 0 Posts
Default

Several years ago, I did a search for 6906s after I bought one.

I found this information then. I don't remember where I got it from, but here it is.

III. Firearm Information by Type
C. Semi-Automatic Pistols
2. Models and Manufacturers
r. Smith & Wesson
5. 69XX Series
by Rick Moore.

Frequently Answered Questions File
for the
Model 469, 669, 6904, 6906, and 6946
12-Shot 9mm Pistols by Smith & Wesson



--------------------------------------------------------------------------------


Summary
Manufacturer: Smith & Wesson
Models: 469......Blue slide, alloy frame (to 1988)
6904.....Blue slide, alloy frame (1989 on)
669......Stainless slide, alloy frame (to 1988)
6906.....Stainless slide, alloy frame (1989 on)
6946.....Double-action only variant of 6906
Type: Autoloading pistol, recoil operated
Caliber: 9mm Luger (aka 9mm Parabellum or 9mm x 19mm)
Capacity: 12 rounds (pre-1994 magazines)
10 rounds (post-1994 magazines)
Sights: Pre-1988 models.......rear drift adjustable notch
and front fixed blade
Post-1988 models......Novak 3-dot sights
Tritium night sights are optional
Dimensions:
Barrel Total Weight
Length Length (empty)
------ ------ -------
469/669 3.5 in. 6.875 in. 26 oz.
6904/6906/6946 3.5 in. 6.875 in. 26.5 oz.


Introduction
Smith & Wesson produces a wide range of firearms, including many different models of 9mm pistols. This FAQ deals specifically with the compact 12-shot models.
These pistols all have lightweight alloy frames, and are available with the slide in either blued steel or brushed stainless steel. Prior to 1988, these were called the models 469 (blued) and 669 (stainless). After 1988, and several minor modifications, they were called the 6904 and 6906, respectively, to fit into Smith & Wesson's new 4-digit model numbering scheme for pistols. A double-action only variant of the 6906, called the 6946, is also offered. For purposes of this FAQ, we will refer to these five models collectively as the "69XX" models.

For comparison, Smith & Wesson also offers 8-shot compact 9mm pistols and 15-shot mid-sized 9mm pistols which are identical in operation to the 69XX models, but different in terms of capacity, weight, and grip size. Anyone considering a 69XX model would be wise to also investigate the other models as well before making a purchase decision.


Construction
The S&W 69XX pistols feature fairly traditional all-metal construction. The one obvious concession to modern technology is the alloy frame, which reduces the overall weight by several ounces over its hypothetical all-steel equivalent. It still feels like a brick compared to some similarly sized compact pistols, though.
Before first handling one of these pistols, I expected the hardware to be rough and brutish but functional, in keeping with S&W's reputation as the Ford or Chevy of the gun business. My impressions since examining several are the exact opposite in terms of machining and smooth operation.

All the metal parts fit together exceptionally well, and no edges were in need of deburring. The internal parts appear well machined and they move smoothly where they are supposed to. And the trigger pulls are fantastically smooth for such mass-produced firearms.

Inside the gun we find exactly what we'd expect in a basic recoil-operated pistol: Spring, guide rod, and barrel resting in the bottom of a heavy metal slide, all atop an intricate but traditional firing mechanism crammed into the leftover spaces around the magazine cavity.

The grip panels are checkered plastic or rubber. On the pre-1988 models, the grips are in three pieces, two side panels plus backstrap, while on the post-1988 versions the grip is in one wraparound piece. The pointy plastic checkering on the older models is unusually deep, and I found myself suffering mild but annoying skin abrasions after handling one for a short while. This is probably curable by sanding down the 'tips' of the checkering or replacing the plastic grips with the readily available rubber grips.

The bottom of the grip portion of the frame mates nicely with the large contoured plastic floorplate of the magazine, to provide a total grip length that seems ideal for average sized hands. However, because the magazine floorplate ends in a protruding pinky rest, shooters with large hands may not be able to fit all of their fingers onto the grip.

The standard sights on the pre-1988 models are a simple square notch in the rear and a vertical blade in the front. After 1988, the standard sights were changed to Novak 3-dot sights, with highly visible white dots front and rear, and a much wider rear notch to improve the sight picture. All models can be had with glow-in-the-dark Tritium night sights instead of the standard sights at a moderate additional cost.


Operation
The Smith & Wesson 69XX pistols operate via the same short-recoil (Browning patent) mechanism as the majority of other modern pistols, briefly described here for those who are not familiar with firearm operation.
When the pistol is fired, the pressure of expanding gasses pushes the bullet forward out the barrel, and also pushes backward against the gun. This rearward force causes the slide to move backward, compressing the recoil spring. When most of the pressure has subsided, the slide unlocks from the barrel and continues further rearward. The empty cartridge casing moves back with the slide. When the slide nears the rear of its travel, the casing bounces off the tip of the ejector and out the ejection port on the side of the slide. As the force of the slide's rearward motion subsides, the kinetic energy stored in the compressed recoil spring drives the slide back toward the front of the gun. As the slide passes forward over the top of the magazine, it drags a fresh cartridge along with it and pushes the cartridge up the feed ramp into the breech end of the barrel where it will reside until the pistol is fired again (or until the cartridge is ejected manually by the operator).

Loading of the S&W magazine is similar to that of many other pistols. Rounds are pushed down and back into the top of the magazine by finger pressure, one by one until the desired number of rounds have been loaded.

To load the pistol, push the loaded magazine up into the magazine well (in the grip) until it 'clicks' into place. Then, grasp the slide firmly, pull the slide back against the spring tension about two inches, then let go of the slide. As the slide snaps back into place, it loads the first round from the top of the magazine into the firing chamber.

The 69XX pistols (except the 6946 DAO) can shoot the first shot as either double-action (hammer is cocked by trigger) or single-action (hammer is pre-cocked by slide). Subsequent shots are always single-action. The slide-mounted ambidextrous safety/decocking lever determines whether the first shot is double-action or single-action.

If the safety is on when a round is chambered, the hammer will stay down (uncocked) when the slide returns to the resting position. In this case, the first shot will be double-action. The long (but smooth) trigger pull on the double-action shot will cock the hammer, then drop it (firing the gun) when the trigger reaches the maximum extent of its travel.

If it is desired that the first shot be single-action, the safety must be off at the time the first round is chambered. In this case, the trigger pull on the first shot and subsequent shots will be identical, very short and smooth.

Since the safety lever is also the decocking lever, it is not possible to have the gun "cocked and locked" as is possible on traditional single-action pistols like the Colt 1911. If the S&W 69XX is cocked, then it is by definition unlocked. If it is locked, then it is automatically decocked. Also note that the hammer is bobbed so it cannot be finger-cocked like the hammers on most single-action pistols.

Once a round is chambered and the safety is off, the gun will fire one shot each time the trigger is pulled. A new round is automatically chambered and the hammer automatically cocked after each shot. If shooting is to be interrupted before the gun is empty, the safety lever can be engaged, which decocks the hammer and disconnects the trigger.

The 6946 model, since it is double-action only, operates slightly different from the other models. Each time the trigger is pulled, the hammer is cocked and released, and there is no decocking lever or manual safety.

If the 69XX is emptied by shooting, the slide will lock back after the last round is expended. This is the gun's signal to the shooter that it is empty. The slide can be returned to the resting position by pressing down on the slide release lever located just above the trigger on the lefthand side of the gun.

To unload the gun, engage the safety (except 6946), press the magazine catch located just behind the trigger on the left side of the grip, and remove the magazine from the magazine well. Then, pull the slide back to eject the chambered cartridge (if any). Pull the slide back again, and look at the chamber to make sure it is empty. The gun can then be safely put away, cleaned, etc. Always keep fingers away from the trigger when unloading any gun.

Note that the S&W 69XX pistols are equipped with a magazine safety. When the magazine is removed, it is not possible to fire the round that may be left in the chamber. Some people like this feature, some don't.


Factory Options and Accessories
The Smith & Wesson 69XX pistols are available in two basic finishes, those with blued slides and those with stainless slides.
Besides the basic finishes, the following options have been or are available from Smith & Wesson:


Tritium night sights
Rubber grips instead of plastic
Additional 12-round magazines (no longer available)
Additional 10-round magazines (since 1994)
Hardshell pistol cases (standard equipment with new S&W guns for the past few years)
Smith & Wesson also offers a custom shop, which can add practically any optional stuff you are willing to pay for.

Pricing and Availability
Smith & Wesson pistols of all types are readily available from most major gun dealers across the United States and several other countries. Since large quantities of these pistols have been manufactured, they are also readily available used and/or at gun shows.

List prices, summer 1995:

Model 6904 with two 10-round magazines..................$614
Model 6906 with two 10-round magazines..................$677
with Tritium sights..........................$788
Model 6946 double-action only (DAO).....................$677

Typical prices (from brief survey in summer 1995):

Model 469 with one 12-round magazine (used)........$300-$400
Model 669 with one 12-round magazine (used)........$350-$450
Model 6904 with one 12-round magazine (used).......$350-$450
Model 6904 with two 10-round magazines (new)......about $550
Model 6906 with one 12-round magazine (used).......$375-$475
Model 6906 with two 10-round magazines (new)......about $600
New 10-round magazines.............................about $20
Used 12-round magazines (hard to find)...............$30-$50

(NOTE: All figures are in US dollars)

Miscellaneous Q & A
Q: What are the differences between the pre-1988 models and post-1988 models?
A: Pre-1988 models have 3-piece grip panels and generic combat sights. Post-1988 models have a one-piece wraparound grip panel and Novak sights. The later models also have the decocking levers held in place by a small pin instead of the large protruding Phillips head screw found on the older models. The later models are a half ounce heavier, mostly due to the new grip design. Also, the nice blue plastic S&W pistol storage cases did not become standard equipment until some time in the mid-to-late 1980's, so some of the old models did not have them.
Reply With Quote
  #6  
Old 09-09-2008, 03:48 AM
MRMATT MRMATT is offline
Member
 
Join Date: May 2003
Location: Pottstown, PA
Posts: 10
Likes: 0
Liked 1 Time in 1 Post
Default

Simply put, the 6906 is one of the best 9mm's ever made, IMHO.
Reply With Quote
  #7  
Old 09-09-2008, 12:50 PM
roy45 roy45 is offline
Member
 
Join Date: Sep 2008
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
Default

"Simply put, the 6906 is one of the best 9mms ever made, IMHO." Absolutely correct, in my opinion. Mine is probably my most accurate 9mm,
and has been completely reliable with every type of ammunition I have tried in it.I have outshot other 9mms with longer barrels and larger grips with this little pistol. I usually favor something more powerful, but I don't know of a better 9...
Reply With Quote
  #8  
Old 09-10-2008, 12:01 PM
mp357 mp357 is offline
Member
 
Join Date: May 2008
Posts: 95
Likes: 0
Liked 0 Times in 0 Posts
Default

I picked up mine this AM, it was a new CDNN gun that had been sitting in my favorite shop for over a month now and it needed a home, loaded the mag with cheapo ball ammo, and put all 12 rounds in one hole at 10 yards. I did not even bother to shoot anymore. Ammo is too expensive to waste. My streak goes on, I've still never had a problem with a S&W centerfire auto, going all the way back to the orig 39 & 59. The 6906 is my 1st fav & 3913 is a close #2..No gun is better!
Reply With Quote
  #9  
Old 09-10-2008, 07:53 PM
Mortech's Avatar
Mortech Mortech is offline
Member
6906 Info 6906 Info 6906 Info 6906 Info 6906 Info  
Join Date: Oct 2003
Location: Shelton WA
Posts: 185
Likes: 0
Liked 2 Times in 2 Posts
Default

The 6906 is a fine pistol , I wish the grip profile was a lil slimmer , sort of similiar to my 3913 with the Hogue grips . Other than that I really like mine alot . Heres a pic of my 3913 and 6906 to give you some idea about how similiar they are .

__________________
39-2,59,3913,M&P40
1006,1066
Reply With Quote
  #10  
Old 09-15-2008, 09:42 AM
Flathead Flathead is offline
Member
6906 Info 6906 Info  
Join Date: Aug 2008
Location: Nevada
Posts: 155
Likes: 2
Liked 67 Times in 42 Posts
Default

Thank you one and all. This is my first chance to get back to you. Since purchasing, I have fired several hundred rounds without any issues. I had initially considered the Browning Hi-Power but this little gun "spoke to me" from the display case. We have become inseparable. I will be qualifying with it for my CCW this week. I believe this will be a lifelong affair. My wife loves the model 36 I gave her so we are a "Smith Family" now. Thanks again and happy shooting!
Reply With Quote
  #11  
Old 09-15-2008, 03:34 PM
PX15 PX15 is offline
Member
 
Join Date: Feb 2004
Location: S.E. Georgia. USA
Posts: 311
Likes: 0
Liked 8 Times in 5 Posts
Default

Quote:
Originally posted by Flathead: My wife loves the model 36 I gave her so we are a "Smith Family" now. Thanks again and happy shooting!

Fh:

Don't guess she'd care for one of these?



Best Wishes,

Jesse
__________________
"Laus Deo"
Reply With Quote
  #12  
Old 09-15-2008, 06:05 PM
ShelbyV8 ShelbyV8 is offline
Member
 
Join Date: May 2005
Location: Killeen TX
Posts: 161
Likes: 17
Liked 76 Times in 42 Posts
Default

I have had a standard 3913 and I now have a 3913NL. When carrying in a paddle holster I don't notice any difference between the 3913 and my 6946. I prefer my 6946 with a 15 round magazine. The 6946 fits my big hands better and at 6'2" 270lbs they hide about the same.
Reply With Quote
  #13  
Old 09-19-2008, 06:08 AM
Flathead Flathead is offline
Member
6906 Info 6906 Info  
Join Date: Aug 2008
Location: Nevada
Posts: 155
Likes: 2
Liked 67 Times in 42 Posts
Default

PX15:
I wish I could afford a LadySmith like yours. My wife really liked the picture. Nice gun.
Reply With Quote
  #14  
Old 09-19-2008, 06:31 AM
PX15 PX15 is offline
Member
 
Join Date: Feb 2004
Location: S.E. Georgia. USA
Posts: 311
Likes: 0
Liked 8 Times in 5 Posts
Default

Quote:
Originally posted by Flathead:
PX15:
I wish I could afford a LadySmith like yours. My wife really liked the picture. Nice gun.

Thanks..

Don't know how long I'll have it.. My wife took an instant liking to it..

Jesse
__________________
"Laus Deo"
Reply With Quote
Reply

Tags
1911, 3913, 3913nl, 669, 6906, ambidextrous, browning, cartridge, ccw, cdnn, checkering, colt, ejector, hi-power, hogue, ladysmith, novak, smith and wesson

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any info on 6906 S/N cmyorke Smith & Wesson Semi-Auto Pistols 4 11-01-2015 06:03 PM
6906 hammer in a 669 with 6906 frame? imarangemaster Smith & Wesson Semi-Auto Pistols 0 02-17-2015 12:06 AM
alliant info not matching Lyman info???? Johnnn01 Reloading 20 09-24-2014 06:18 AM
info on sw 6906 deduke1907 Smith & Wesson Semi-Auto Pistols 8 08-19-2013 01:45 PM
Need some Info on a S&W 6906 Please ConquestN98858 Smith & Wesson Semi-Auto Pistols 14 03-20-2013 02:55 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:21 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)