As an add-on. Once you get the ejector rod tightened to where you can open the cylinder, go to your local auto parts store and get a spray can of NON chlorinated brake cleaner. Back the ejector rod completly out and spray down the threads and let air dry, just a few minutes. This will remove all grease/oil from the threads. Apply the BLUE Loc-Tite and screw the rod back in. This will insure a rock solid fit until the time comes when you need to remove the rod in the future. If/when you need to back the rod out you will have to heat the area where the Loc-Tite was applied. The heat from your hair dryer will be fine for this application without doing damage to your gun.

Class III