Quote:
Originally Posted by bad_man_ one
Well,
It turns out that the barrel CS-40 barrel is no longer available from Smith and Wesson.
So,
If anyone has a spare that they would like to part with, please let me know.
I would like to do some testing with one before I use any of the longer spares that I have for the 10 m.m./.40 S&W barrel conversion project.
I thought getting a heavy duty spring was going to be the main concern.
I have some "Sample" flat coil springs coming in the mail.
Regards,
BM1
|
Hey all you CS-40 owners,
I received a couple of samples of flat wire heavy duty springs today.
They are dimensionally similar (I.D and O.D.) to the stock ones, but much, much stronger.
Looks like I'll be able to do CS-40/10 m.m. conversions like the 4013/10 m.m. conversions that were done.
The difference is the magazines do not have to be modified as much as the 4013 ones had to be.
But, because there are no barrels to be found, you would have to dedicate your CS-40 to becoming a 10 m.m.
I will look into using some of the conversion barrel project barrels.
I would use barrels that have not been spoken for, because some people have not followed up with their contact informatoon.
I think I will able to maybe produce a couple/few.
Regards,
BM1