I was asked recently how I get my primers into a coffee can.

On my Square Deal B presses, here is what I did:



The hose barb is a 1/8" NPT to 3/8" tubing male. I threaded the press hole at the bottom to 1/8"NPT, yes, I had a tap, and then threaded the barb in there. Soft tubing from Ace Hardware, the other end stuck in the top of a plastic coffee can and VIOLA, big time primer catcher for cheap.

I also have a system for the XL650 but don't have any pictures to share. I will work on it and get some up soon.

Hope this helps!