If you remove the grips (stocks to Smith & Wesson) be aware there is a pin at the bottom of the stock that can crack/chip your grips/stocks if they are removed improperly. Loosen the screw two to three turns with a proper fitting screwdriver (hollow ground blade preferred). Tap the screw head a few times and the panel opposite the screw head will loosen. Remove the screw and the panel and carefully tap the bottom center of the inside of the stock, just above the frame, to remove it. Be careful not to pull the grip down and away from the top or you will surely break the grip. The screw and the pins are parallel to each other. Mike #283

__________________
Mike Maher #283