Quote:
Originally Posted by Ceapea
I've been doing this ever since I started loading with my used, inherited equipment. It works great and you can get very accurate weights by doing so.
Another "tip"...for a media separator.
I picked up a $2 dish washing pan at the dollar store (huh?) and marked 1" square lines all across the bottom. I drilled a 1/4" hole at every intersection to "drain" the media. I put it into an 18 gal tub ($4 at hardware store) and dump the media and brass into the dish pan. After 35-40 seconds of shaking, all you have left is clean, shiny brass. Then I pour the media from the 18 gal tub back into the tumbler.
Works great! To speed thing up even more, I recently drilled 1/4" holes in the middle of each square and now it takes about 1/2 as long (20-25 seconds maybe) to separate everything.
Here are some pictures...
|
That's a lot of drilling. I like the idea but I'm gonna try a shotgun!