52-2 ejectors
There was at least one revision/redesign of the ejector. The original part number for the 52-2 ejector was 06182. I believe Brownells sells part # 23019. The revision dealt with the profile of the bottom edge of the nose of the part, which originally had a "square" or sharp corner, and the "nose" was made slightly longer. (undercut longer) This sharp corner became a rounded profile in the new part, to help prevent breakage. also, the "added" free length and the small "seat" peened into the bottom edge of the nose helped it interface better (properly) with the top edge of the inserted magazine. See photos below....old ejector on left.
Keep in mind that the nose of the new ejector will be slightly longer, and you may have to modify the nose to a length and angle similar to the original one. Also, as you already know, your recoil spring, and it's affect on the speed of the slide opening and it's rearward travel plays a role in the effectiveness and reliability of the ejector and the ejection process. So you may have to tune your current recoil spring setup to work with the new ejector.
Let me know if you damage the new one, or need a spare. I have one (# 23019) I can send you....and you won't have to pay the added shipping fees etc.
__________________
Ret. LE, FA Instr, S&W Armorer
Last edited by armorer951; 06-28-2016 at 09:56 AM.
|