Thread: Build a Nyclad
View Single Post
 
Old 01-11-2017, 06:20 AM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
 
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,855
Likes: 1,029
Liked 5,072 Times in 2,662 Posts
Default

Quote:
Originally Posted by Rock185 View Post
I don't know how the old Nyclads compare to other defensive 38 Spcl. ammo, but to satisfy my own curiosity went out and chronographed Nyclads in a snub nosed revolver today.

I used a S&W 642 revolver with ~2" barrel to test the Federal 125 grain standard pressure Nyclads and Federal 129 grain +P Hydra-shoks.
The 125 grain Nyclads averaged 765 FPS, the +P 129 grain Hydra-Shoks averaged 763 FPS. I've not done any gel testing, but suspect the soft lead Nyclads might actually expand at these low velocities.

Just for the heck of it I tested some 9MM 124 grain +P HST ammo in my S&W 940 revolver with ~2" barrel. The 9MM +P 124 HST was the round most similar to the .38 Spcl. +P 129 Hydra-Shok that I happened to have on hand. The 9MM 124 +P HST averaged 1195 FPS.

I would personally be comfortable carrying the old Nyclads in a little 5-shot .38 revolver. None of the 38 ammo I've tested seems like Thunder and Lightning when fired in these little short-barreled guns. Ballistically, the 9MM HST in the little 940 revolver was far superior to even the +P .38 Spcl. I knew the 9 would be superior to the 38, but admit I was surprised by how much. I would think that factory Nyclad velocities could easily be duplicated in hand loads....
You are not testing similar cartridges. The 9mm has close to double the pressure limits as the .38 Special +P. If you want to do a fair comparison compare the 9mm and .357 Magnum since both have a max pressure of 35,000 PSI.

Just a note, higher velocities do not translate into a superior cartridge. Higher velocity is just higher velocity.
__________________
Freedom is never free!!
SWCA #3437

Last edited by ArchAngelCD; 01-11-2017 at 06:23 AM.
Reply With Quote