View Single Post
 
Old 01-16-2020, 09:51 PM
dla dla is offline
Member
 
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 469 Times in 278 Posts
Default

Quote:
Originally Posted by Univibe View Post
Okay, but there are several differences.

1. The bullet on the 9s is much lighter than that of the .45. About half the weight, means much less recoil impulse.

2. The chamber and barrel are the same external dimensions of the .45, so that means the walls are much thicker and will handle much higher pressures.

3. A useful comparison is the 1911 in .40. The .40 can be thought of as a type of .45 +P, since the bullet's only 50 grains different. There's a reason that Colt, Kimber et al dropped it not long after the introduction. It's too much mass and too much pressure for the 1911. Slide goes too fast and it can cause intractable problems. The design just won't handle it.

So the 1911 can handle 9mm +P and .38 super, but not (reliably) .40. I'd say the .45 +P is more like the .40 than it is the smaller calibers.

Again, I'd pass on .45 +P. You're asking Browning's gun to do something it wasn't designed to do.
Pressure doesn't move the slide.
+p is no big deal - in fact I dont know why they bother with that silly 19Kpsi anymore.

I shoot +p constantly - 185gr @1100fps. If I wanted a bear load, I would have no qualms about a 230gr at 1000+fps. In fact, Ramshot used to publish a recipe using Enforcer that took a 230gr above 1000fps and stayed below +p.
The Following User Likes This Post: