Quote:
Originally Posted by armorer951
Also, if there is excessive wear on the frame and slide rails, the manual safety decock may not work and the sear lever may not decock the gun. Try engaging the safety lever fully down, and then pressing down firmly on the top of the slide right behind the rear sight to see if the hammer will drop.
|
My brother in law has a 659 with a similar issue. The safety doesn't usually drop the hammer unless its pushed very hard and sometimes not at all. If I squeeze down on the frame the hammer falls. He is the original owner, very low round count and no work has been done on it. Whats the fix for this?