Quote:
Originally Posted by jurek
OK. The first of all - are you willing to take the handgun apart? You cannot polish parts without removing trigger, trigger bar and firing control unit out from the frame.
When you look at the pictures you will see:
1. pin in firing control unit with lifter (pivoting on the pin)
2. small ledge with the spring which sits inside the frame, just below the trigger bar
3. trigger bar with red circles which show contact points you need to focus on.
If I'd do this - I'll go and polish whole trigger bar.
|
I've twice viewed the video you recommend. That first photo, the part appears unfamiliar but perhaps the video did not depict it from that view. I gotta' inquire, is that part like mine, from a M&P Shield EZ 380 with
thumb safety?
With the hammer in the forward "unfired" position, the trigger pull feels smooth. And with the hammer and sear engaged, the pull feels scratchy. The engagement of those two surfaces lead me to believe is where the source of my issue arises.