Quote:
Originally Posted by handejector
Not necessarily. There are six teeth on the ratchet. Two of them are smaller than the others. If you replace the hand with one that is longer and/or thicker, it might put all six in time. The hope is that a longer/thicker hand will work on all six teeth without binding.
OCCASIONALLY, and only occasionally, IF no hand can be fitted that will work with all six teeth, I can agree that peening the two small teeth is worth a try. That is the only time I agree with peening teeth- when no hand that will work can be fitted.
|
In fact, after having shot it, I’m not sure the issue is happening on same chambers. Also, sometimes there is no issue at all. I could shot 20 cartridges without having a bad timing issue.
I should make a mark or something on the cylinder for each chambers to identify if the problem is happening on different or same chambers, but I have currently no idea how I could do that without damage.
