Quote:
Originally Posted by mike campbell
Alliant Green Dot has changed.
It is not "internet myth."
Many handloaders of shotshells noticed a difference big enough to detect just by shooting. It helped that many had used the same recipe for decades.
Some handloaders resorted to the chronograph to verify their suspicions. I have personally loaded over 1,000 lbs of Green Dot thru the same bushing over a 25+ year timespan. I've chronographed that load a couple of times a year and noted differences concomitant with lot changes of the powder and primer brand....to be expected. After collecting the data for 25 years I felt confident that the more recent results, coinciding with new green cap used on recent 8lb kegs, are statistically significantly different.
A few handloaders went so far as to have loads pressure & velocity tested by independent laboratories which confirmed a "new, hotter Green Dot."
I find the conclusion irrefutable. YMMV.
P.S.
When Alliant changed Red Dot they didn't change the name. They just called it "Now 50% cleaner burning!"
|
It's quite possible for a powder to have the internal ballistics change
without any change in the burn rate.
For example if the manufacturing process or formula is changed there can be a corresponding change in the Density. When that happens if you don't change the volume of the powder measure you are using you can see a large change in the produced velocity. It' something that drives me a bit nuts in the Shotgun World. Every time loads are discussed it's "you should use bushing X for that load and bushing Y for this load". Ask them how many grains you get with Bushing X and you get a blank stare. What is really scary about this is that current bushing tables can be 10 or 20 years out of date and I've talked to some folks who are using bushing tables published back in the 1950's because it's what their father used. Folks you need to get a scale so you know the
weight of that powder charge because relying on bushing tables is potentially dangerous.