|
|
03-06-2024, 02:31 AM
|
Member
|
|
|
Join Date: Aug 2018
Location: Chicagoland
Posts: 1,470
Likes: 1,260
Liked 2,533 Times in 859 Posts
|
|
Interesting old ammo - WRA Co. .44WCF
I've had this round for probably 45 years, sitting in the back of a drawer and just found it. I got it from a guy that gave it to me because I found it interesting. Fast forward to today and here it is.
This .44 WCF (.44-40) round is headstamped WRA Co. for Winchester Repeating Arms Company. It has what seems to be an aluminum jacket, or at least that's why it appears to be because of the silver color. The primer has a "W" stamped in it as well. They must give the newbie that job.
Any idea what era this round comes from? Any other info would be appreciated. Thanks for the help!
Last edited by Borderboss; 03-06-2024 at 02:38 AM.
|
The Following 3 Users Like Post:
|
|
03-06-2024, 05:20 AM
|
Suspended
|
|
|
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,747
Likes: 1,590
Liked 8,916 Times in 3,555 Posts
|
|
Just like the .32 S&W thread, this cartridge is pre-WWII. The bullet jacket is Tin plated over a Copper alloy. All white metals are not Aluminum!
|
The Following 2 Users Like Post:
|
|
03-06-2024, 12:05 PM
|
Member
|
|
|
Join Date: Jan 2011
Location: Mountains of Colorado
Posts: 2,815
Likes: 2,433
Liked 6,638 Times in 1,836 Posts
|
|
The bullet itself may have a small W stamped into the jacket near the case mouth. Winchester did this for a few years as well.
|
03-06-2024, 12:21 PM
|
Member
|
|
|
Join Date: Mar 2000
Location: Wa.State (Vancouver)
Posts: 624
Likes: 1,237
Liked 701 Times in 244 Posts
|
|
Tin?
Quote:
Originally Posted by Alk8944
Just like the .32 S&W thread, this cartridge is pre-WWII. The bullet jacket is Tin plated over a Copper alloy. All white metals are not Aluminum!
|
Tin? Perhaps silver?
A Vampire round?
🙀🙀
|
The Following User Likes This Post:
|
|
03-06-2024, 02:18 PM
|
Member
|
|
|
Join Date: Jan 2002
Location: Rhode Island, USA
Posts: 64
Likes: 2
Liked 43 Times in 24 Posts
|
|
That's likely a 19-teen's or 20's round. The jacket is cupro-nickel. That color is typical of WWI era ammo from 45's to 30-06 and in commercial ammo. The cupro-nickel metal fouled bores badly- but it was the best they had available at the time. Gilding metal (copper-zinc) alloys hadn't been invented for use in bullet jackets yet.
Hatcher's Notebook may have some good information on cupro-nickel fouling back in the pre-WWII era.
|
The Following User Likes This Post:
|
|
03-06-2024, 02:58 PM
|
Member
|
|
|
Join Date: Aug 2018
Location: Chicagoland
Posts: 1,470
Likes: 1,260
Liked 2,533 Times in 859 Posts
|
|
Thanks for the info guys. I'll check to see if there's a "W" stamped on the jacket when I get home.
You might have noticed that there's what looks like a crack in the rim. That is actually a crack that runs from the primer pocket, through the rim, and actually runs up the case about 1/2-inch. I don't know how that could happen, but I'm thinking this is a round for a collector and not for shooting at this point.
If someone collects these and wants this round, send me a PM and I'll send it to you. No cost, just pay it forward.
|
03-06-2024, 03:42 PM
|
Member
|
|
|
Join Date: Aug 2009
Posts: 1,127
Likes: 36,407
Liked 936 Times in 497 Posts
|
|
Quote:
Originally Posted by Borderboss
Thanks for the info guys. I'll check to see if there's a "W" stamped on the jacket when I get home.
You might have noticed that there's what looks like a crack in the rim. That is actually a crack that runs from the primer pocket, through the rim, and actually runs up the case about 1/2-inch. I don't know how that could happen, but I'm thinking this is a round for a collector and not for shooting at this point.
If someone collects these and wants this round, send me a PM and I'll send it to you. No cost, just pay it forward.
|
A crack in the case head would certainly render it unsafe to shoot. I have seen the results of a case head failure during firing and it can be bad. As to the cause it could be a flaw in the metal used to make the case or possibly brittle brass. Might have been there since made and was missed during inspection.
|
The Following User Likes This Post:
|
|
03-06-2024, 07:47 PM
|
Member
|
|
|
Join Date: Aug 2018
Location: Chicagoland
Posts: 1,470
Likes: 1,260
Liked 2,533 Times in 859 Posts
|
|
Quote:
Originally Posted by 30-30remchester
The bullet itself may have a small W stamped into the jacket near the case mouth. Winchester did this for a few years as well.
|
Wow, sure enough, it's there. It's right above the cannelure. Too small for me to photograph with the equipment I have. Very cool!
|
|
Posting Rules
|
|
|
|
|