|
|
|
04-17-2010, 04:14 PM
|
|
Member
|
|
|
Join Date: Jun 2009
Location: NH
Posts: 391
Likes: 6
Liked 50 Times in 23 Posts
|
|
Any one carry a Charter Arms Bulldog?
My Primary Carry Revolver is an old 3 inch Charter Arms Bulldog in 44 special.I was just wondering if any one else carries these nice light 44 specials?I know there are better choices as I have plenty of other carry guns but I just like the light revolver in the 44 caliber.
|
The Following 7 Users Like Post:
|
|
04-17-2010, 04:19 PM
|
Member
|
|
|
Join Date: Apr 2005
Location: TEXAS
Posts: 18,246
Likes: 7,989
Liked 5,677 Times in 2,190 Posts
|
|
Two Guns,
I ahve owned two (2) over the years, last one was back in 1989.
It is a fine concept and I would buy another one if the situation were right.
Back in those days, I traded, swapped, sold, and such like crazy.
Nothing wrong with the guns I had, just would get on a tear and trade it for something else I didn't have.
__________________
I am a sheep dog!
1601 (ret)
|
The Following 4 Users Like Post:
|
|
04-17-2010, 07:36 PM
|
Member
|
|
|
Join Date: Feb 2006
Location: East river South Dakota
Posts: 678
Likes: 6
Liked 107 Times in 57 Posts
|
|
They are nice little revolvers. Isn't it amazing that Smith can't compete with little ol' Charter Arms?
And no, I don't consider that the 696 competes. It don't.
Cat
__________________
Think for yourself.
|
The Following 4 Users Like Post:
|
|
04-17-2010, 08:55 PM
|
Junior Member
|
|
|
Join Date: Oct 2003
Location: Sheridan, Wyoming
Posts: 5,332
Likes: 159
Liked 3,889 Times in 1,361 Posts
|
|
I had a customized one not too long ago. Bobbed hammer, slicked up, new springs, etc. It was engraved "Terminator" or something like that. I swapped it even for a minty old SB Model 36 and was happy with the deal. My wife liked it, but I was never quite sold on the concept. I've had two of the Charter .44s over the years. The other was a pug. I still have one of the Rossi 720s that I'll probably trade off.
Even in custom format, the erratic QC of Charter over the years left me a bit uneasy. I also found them to be a bit snappish. My wife liked the Charter .44s a lot though and yelled at me for swapping them off.
.44 Special ammo has unfortunately become increasingly hard to find and expensive. I always liked the Blazer JHPs though.
|
The Following 2 Users Like Post:
|
|
04-17-2010, 09:06 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Watkinsville, GA
Posts: 1,840
Likes: 0
Liked 180 Times in 73 Posts
|
|
I have a .44 "Target" (very optimistic name I might add) that I have had for a while....it is my 5 shot "disposable" truck type gun, as the thumb latch no longer opens the cylinder, I I have to insert a thin tool under the end of the extractor rod to pull it open...
I keep it loaded at all times, figuring that 5 quick 44 200 grn GD's might get me out of a jam sometimes....then again, I don't have any emotional investment in it....
I (draw big red heart here) my 696 no dash.....
|
04-17-2010, 09:19 PM
|
Member
|
|
|
Join Date: Mar 2003
Location: East of Dallas... TX
Posts: 951
Likes: 33
Liked 161 Times in 91 Posts
|
|
I found a box of Blazer 44spl Gold Dot HPs in my stash, had six shots fired (must have got them to let my friend try them since I've never owned a 44 of any sort). I am keeping them just in case I find a good deal on a Bulldog, I'll already have ammo for it
__________________
I miss my 4546 the most.
|
The Following User Likes This Post:
|
|
04-17-2010, 09:21 PM
|
Member
|
|
|
Join Date: Feb 2009
Posts: 466
Likes: 0
Liked 36 Times in 10 Posts
|
|
I don't mean to be rude to those who like them but I'm not enthused about them.
I bought one of the first one's in the early 70's,kept it for a short while and sold it.The quality was terrible in my opinion.I have examined many since and have never been impressed.The concept has merit but the actual product did not do justice to it.In my opinion,it's a good idea that's badly executed.
|
The Following 2 Users Like Post:
|
|
04-17-2010, 09:33 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,465
Likes: 91,435
Liked 25,209 Times in 8,613 Posts
|
|
My PD issued me one years ago. I carried it as a BUG for a number of years.
They made me give it back when I retired.
__________________
John 3:16
WAR EAGLE!
Last edited by Muley Gil; 01-11-2017 at 10:17 PM.
|
The Following User Likes This Post:
|
|
04-18-2010, 01:36 PM
|
Member
|
|
|
Join Date: Jul 2006
Location: Republic of Texas
Posts: 26
Likes: 3
Liked 27 Times in 7 Posts
|
|
I really like my S&W 696, but finally quit trying to use it for a CCW and went with an old Flat Latch Centennial. That little Centennial is a whole lot more "comfortable" to carry than the 696, but not as "comforting". Then I bought an older model BullDog and still carry it to this day. It's a lot lighter and smaller than the S&W "L" frame, but is much more reassuring than a .38. I'm very happy with the .44 BullDog. Still wish I could carry that nice 696 comfortably, though.
|
The Following 2 Users Like Post:
|
|
04-18-2010, 02:53 PM
|
|
Member
|
|
|
Join Date: Mar 2009
Location: East TN
Posts: 940
Likes: 173
Liked 343 Times in 85 Posts
|
|
Yes, my dad has one of the older 3" models and I used to have a 2 1/2" pug. Both are/were very accurate and I never had any problems with them. Had to tighten the cylinder latch screw on a regular basis, but carried that pug for several years - good for what it is (light and powerful). Sadly, my pug was stolen from the trunk of my wife's car; I'll never valet park again.
|
The Following User Likes This Post:
|
|
04-23-2010, 06:31 AM
|
Member
|
|
|
Join Date: Apr 2010
Location: TX
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
|
|
My preferred carry firearm is a .44 Bulldog. Unfortunately I have been through several of them due to people offering more than I can refuse for them. Between Bulldog's I carry either a Beretta Tomcat or a S&W Combat Masterpiece.
|
04-23-2010, 07:06 PM
|
|
Member
|
|
|
Join Date: Dec 2006
Location: MI
Posts: 1,426
Likes: 29
Liked 1,013 Times in 231 Posts
|
|
Here is a Charter Arms Bulldog Pug. Customized by Mag-Na-Port.
__________________
ΜΟΛΩΝ ΛΑΒΕ
Last edited by whitecoyote; 04-26-2010 at 02:49 AM.
|
The Following 11 Users Like Post:
|
Cocked & Locked, CWH44300, drinva, haywood, ironhead7544, LaVistaBill, loc n load, neubert500, savage99nc, The Real Hawkeye, WaMike |
04-25-2010, 08:00 PM
|
Member
|
|
|
Join Date: Feb 2008
Location: Cocoa,Fl.
Posts: 121
Likes: 0
Liked 22 Times in 8 Posts
|
|
I tried carring my 696 also. Too much gun for trying to hide it. Plus it kept wanting to pull my pants down. I do still have it and love that 44spl.
Burch
|
The Following 2 Users Like Post:
|
|
04-28-2010, 12:13 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2004
Location: OK
Posts: 154
Likes: 3
Liked 35 Times in 14 Posts
|
|
I carry a 696 frequently. A good IWB and belt make all the difference in the world with this gun. I also carry SIGs but have gone more and more to revolvers in the last few years (like I started out) I owned a Bulldog back in the 70s and really liked the concept. I suppose that is where I became so fond of the .44 Special cartridge. However, mine kept falling apart on me so I got away from Charter. When my 696 seems to get too heavy I just carry my 396 Night Guard for awhile. I keep going back to the 696 tho' -- just something about it.
|
04-28-2010, 04:51 PM
|
Member
|
|
|
Join Date: Oct 2007
Location: Wyoming
Posts: 711
Likes: 527
Liked 357 Times in 170 Posts
|
|
Quote:
Originally Posted by gknierim
My preferred carry firearm is a .44 Bulldog. Unfortunately I have been through several of them due to people offering more than I can refuse for them. Between Bulldog's I carry either a Beretta Tomcat or a S&W Combat Masterpiece.
|
Not meaning to drift the thread, but what holster do you carry your Bulldog in?
wyo-man
__________________
Live free or die
|
04-28-2010, 11:05 PM
|
|
SWCA Member
|
|
|
Join Date: Dec 2008
Posts: 6,602
Likes: 737
Liked 1,213 Times in 741 Posts
|
|
Quote:
Originally Posted by Catshooter
They are nice little revolvers. Isn't it amazing that Smith can't compete with little ol' Charter Arms?
And no, I don't consider that the 696 competes. It don't.
Cat
|
smith&wesson can't compete with charter arms...hmmm...interesting if unlikely concept!
__________________
SWCA#2208
KK4EMO
|
The Following User Likes This Post:
|
|
05-01-2010, 11:46 PM
|
Member
|
|
|
Join Date: Feb 2006
Location: East river South Dakota
Posts: 678
Likes: 6
Liked 107 Times in 57 Posts
|
|
Quote:
Originally Posted by kennyb
smith&wesson can't compete with charter arms...hmmm...interesting if unlikely concept!
|
Don't get me wrong, I too see quite a difference between Smith and Charter, with of course the nod going to Smith.
However, Charter has been building a 19 ounce .44 for decades. Smith hasn't. I can't imagaine that Smith can't, but they aren't. So I guess I should re-phrase what I said to "Smith won't compete."
Pity, too, as I would love to own several.
Cat
__________________
Think for yourself.
|
The Following 3 Users Like Post:
|
|
05-01-2010, 11:54 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Watkinsville, GA
Posts: 1,840
Likes: 0
Liked 180 Times in 73 Posts
|
|
Quote:
Originally Posted by Catshooter
Don't get me wrong, I too see quite a difference between Smith and Charter, with of course the nod going to Smith.
However, Charter has been building a 19 ounce .44 for decades. Smith hasn't. I can't imagaine that Smith can't, but they aren't. So I guess I should re-phrase what I said to "Smith won't compete."
Pity, too, as I would love to own several.
Cat
|
This.....quoted for truth....as much as I like the concept, I wish Smith would do it, cause they would do it much better
|
The Following 2 Users Like Post:
|
|
05-02-2010, 03:10 AM
|
US Veteran
|
|
|
Join Date: Sep 2006
Location: The Rust Belt Buckle/Mich
Posts: 2,382
Likes: 0
Liked 41 Times in 32 Posts
|
|
The people running S&W are stupid. They still haven't made a P3AT sized .380 either.
|
05-02-2010, 09:27 PM
|
Member
|
|
|
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,926
Likes: 3,885
Liked 11,837 Times in 3,693 Posts
|
|
My brother carries one, upper left in the photo. He had no problems from it until last fall when it suddenly quit working. It would not cock. The factory repaired it for around $125.00 including shipping. He loves it. He also loves his S&W #36, AMT Back-Up .45 a.c.p., Beretta .25 a.c.p. The S&W #469 he traded back to me for a S&W #908. I had a few of the Bulldog .44 specials when they first came out but sold them to buy a Detonics .45 a.c.p. My CA's worked fine but I always preferred S&W revolvers over all others.
|
The Following User Likes This Post:
|
|
05-03-2010, 09:57 AM
|
Member
|
|
|
Join Date: Jan 2007
Posts: 127
Likes: 0
Liked 8 Times in 4 Posts
|
|
I also have several CA Bulldogs and one is fancied-up and marked "Terminator" as mentioned in an earlier posting. The gun has a bobbed hammer, jeweled trigger and hammer and polished cylinder, etc.. It was made by Personal Protection Systems around 1982/83 and who I believe is now out of business. If anybody has any info about the gun, like how many where made, etc., I would appreciate the response.
|
05-03-2010, 07:51 PM
|
Member
|
|
|
Join Date: Feb 2006
Location: East river South Dakota
Posts: 678
Likes: 6
Liked 107 Times in 57 Posts
|
|
Quote:
Originally Posted by sheriffoconee
This.....quoted for truth....as much as I like the concept, I wish Smith would do it, cause they would do it much better
|
Exactly, sheriff, exactly so! As much as I like the Charter, I would much prefer a Smith.
No one in the world could convince me that Smith is incapable of matching a Bulldog (for size & weight). They just won't. *sigh*
It's a very, very rare corporation that doesn't suffer horribly from the"If it's not invented here then it's not worthy of us" syndrome.
Sad, isn't it? I've read that Charter is and has been for a while running at their full capacity, making and selling 750 revolvers a week. If they can sell 'em, why couldn't Smith? They could, obviously. Oh well.
Cat
__________________
Think for yourself.
|
The Following 3 Users Like Post:
|
|
05-03-2010, 09:18 PM
|
|
Member
|
|
|
Join Date: Nov 2009
Location: Watkinsville, GA
Posts: 1,840
Likes: 0
Liked 180 Times in 73 Posts
|
|
Quote:
Originally Posted by sheriffoconee
I have a .44 "Target" (very optimistic name I might add) that I have had for a while....it is my 5 shot "disposable" truck type gun, as the thumb latch no longer opens the cylinder, I I have to insert a thin tool under the end of the extractor rod to pull it open...
I keep it loaded at all times, figuring that 5 quick 44 200 grn GD's might get me out of a jam sometimes....then again, I don't have any emotional investment in it....
I (draw big red heart here) my 696 no dash.....
|
I quoted myself here, cause I fixed my "thumb latch won't open my cylinder" issue with my CA Bulldog. The thumb latch pushes a screw into the cylinder pin to release the cylinder for opening. The screw was screwed in so far that it would no longer push the pin out. Took the screw out, a dab of blue loctite, and screwed it back in flush with the recoil shield....works perfectly now.
I STILL think Smith could do a better job with the concept....
|
The Following 4 Users Like Post:
|
|
05-03-2010, 09:31 PM
|
Member
|
|
|
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,926
Likes: 3,885
Liked 11,837 Times in 3,693 Posts
|
|
I believe it was either ASP or DEVEL that fitted a Ruger Speed Six with a five shot cylinder and rebored the barrel to .44 special. That discontinued Ruger frame was slightly smaller than a S&W K frame.
|
The Following 8 Users Like Post:
|
|
05-03-2010, 10:59 PM
|
Member
|
|
|
Join Date: Dec 2009
Location: Georgia
Posts: 858
Likes: 14
Liked 82 Times in 52 Posts
|
|
I had a Bulldog back in the 80's. Nice and light, accurate, but their "unbreakable copper beryllium firing pin" wasn't, it turned out. Sure, they fixed it on their dime, but that and the not-so-good fit turned me off and I sold it.
It is an excellent concept and if someone would turn out a better quality product along the same lines it would sell.
|
05-04-2010, 07:32 PM
|
Member
|
|
|
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,926
Likes: 3,885
Liked 11,837 Times in 3,693 Posts
|
|
"but their "unbreakable copper beryllium firing pin" wasn't"
Thats the truth, I broke two of those myself. I have owned about seven CA handguns in all over the years. None of them stayed around long.
|
The Following 2 Users Like Post:
|
|
05-04-2010, 07:59 PM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 31
Likes: 0
Liked 20 Times in 2 Posts
|
|
I have owned a couple of the old Bulldogs before and traded them off. The only Charter that I have held on to is my old Bridgeport Undercover. I guess I'll keep it for many more years, it looks so bad that no one else would want it. I would like to find an early Bulldog now. A lot of power in a small and light package.
I'm really surprised that there hasn't been a lot of Charter Arms bashing going on here. That's usually the case when CA is brought up. The ones that I have owned have all been fine, not the prettiest but the price was always better than the pretty guns.
Here is my old Undercover that has been around the block a time or two.
|
The Following 17 Users Like Post:
|
627 city hunter, 681ismyfavorite, Cocked & Locked, CWH44300, Duster340, gmurdaugh, ironhead7544, jensb, loc n load, MOONDAWG, MyDads38, neubert500, Shorty 45 MK2, sipowicz, snowman.45, tinman931, Watchdog |
06-01-2014, 03:04 AM
|
Banned
|
|
|
Join Date: Apr 2012
Location: Kalifornia
Posts: 501
Likes: 21
Liked 274 Times in 137 Posts
|
|
Quote:
Originally Posted by Two Guns
My Primary Carry Revolver is an old 3 inch Charter Arms Bulldog in 44 special.I was just wondering if any one else carries these nice light 44 specials?I know there are better choices as I have plenty of other carry guns but I just like the light revolver in the 44 caliber.
|
I have one nestled into the glovebox of my car at this moment, and when needed I drop it into a front pocket...absolutely. That IS the strong suit of the CA .44 Bulldog! Tremendous blasting power in a light, compact revolver that is EASY to carry concealed!
|
The Following 2 Users Like Post:
|
|
06-01-2014, 11:09 PM
|
Member
|
|
|
Join Date: Apr 2013
Location: Rancho Cordova, CA
Posts: 1,014
Likes: 1,078
Liked 778 Times in 411 Posts
|
|
I had one back in the day when I had to own everything I could get my hands on and try carrying (c'mon, admit it, we have all gone through that phase). It always worked, never broke, but I never felt the love for one and finally sold it.
__________________
"Sacramento" Bruce Conklin
|
06-01-2014, 11:34 PM
|
|
Member
|
|
|
Join Date: Mar 2009
Location: central pa
Posts: 5,335
Likes: 2,745
Liked 2,492 Times in 1,182 Posts
|
|
I'm a big fan of the Bulldog, however I never could get used to its DA trigger pull. Bought one of the originals, got rid of it, tried another one about ten years later, got rid of it, and two years ago tried one of the new stainless Pug's, got rid of it. Now this is frustrating as I really like the little beasties if only I could tolerate their DA trigger pulls. I'm afraid my trigger finger is just used to the S&W's for double action work. Now this is not a slam against the Bulldog, it seems to be a personal problem!
__________________
Stay safe people!
|
06-02-2014, 06:20 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2013
Location: Central Montana
Posts: 13,874
Likes: 13,170
Liked 40,175 Times in 10,206 Posts
|
|
I have one and had another. Both are OK for what they are. I love the big bore in a small light package. I shoot it enough to keep good with it. I use fairly mild loads. With big bullets speed isn't needed. I did have the failure to open problem on the current gun but made a tiny shim washer to fix it. With the non shrouded ejector guns like mine you can open by pulling ejector forward. I also have a Taurus 431 which is pretty much a fix sight copy of a 696. Mine is well made and smooth, but heavy. The Bulldog can go in my pants or jacket pocket and not have my pants falling down.
I would love an alloy L frame with a 3" barrel, but I want it in 45ACP with moon clips. That would be so perfect. Small, light, big bullet, quick reloading and lots of ammo choices.
|
The Following 2 Users Like Post:
|
|
06-02-2014, 06:26 AM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: NE Texas
Posts: 657
Likes: 172
Liked 528 Times in 228 Posts
|
|
Quote:
Originally Posted by Kilibreaux
I have one nestled into the glovebox of my car at this moment, and when needed I drop it into a front pocket...absolutely. That IS the strong suit of the CA .44 Bulldog! Tremendous blasting power in a light, compact revolver that is EASY to carry concealed!
|
Well my Charter Arms 44 Bulldog has an external hammer so
I carry it in a Galco Paddle Holster. My hammerless S&W 642-1 38 stainless steel airweight I carry in a pocket holster in my pocket.
|
The Following User Likes This Post:
|
|
06-02-2014, 09:22 AM
|
Member
|
|
|
Join Date: Aug 2001
Location: WV
Posts: 2,458
Likes: 421
Liked 2,874 Times in 1,278 Posts
|
|
Quote:
Originally Posted by sheriffoconee
This.....quoted for truth....as much as I like the concept, I wish Smith would do it, cause they would do it much better
|
I'd love to replace my Bulldog with a comparable S&W, but for now the Charter is really the only option.
|
The Following User Likes This Post:
|
|
06-02-2014, 09:42 AM
|
Member
|
|
|
Join Date: Jan 2008
Location: South Florida
Posts: 486
Likes: 15
Liked 666 Times in 201 Posts
|
|
I replaced my sometimes carried S&W 296 with a .44 C/A Bulldog (bought used with a nice action) because the Bulldog was a better size for me to conceal carry.
Based on my favorable impression of the Bulldog, I bought a C/A .40 PitBull (not that smooth of an action).
I put some .40 snapcaps in the PitBull to try and smooth out the action. After a few minutes, I broke the "flag" off of the transfer bar on the PitBull and discovered that the gun would not fire with a broken transfer bar.
C/A's customer service was great, however, I retired BOTH of my C/As from conceal carry use due to this design feature.
Mark
|
06-03-2014, 11:35 AM
|
|
Member
|
|
|
Join Date: Sep 2012
Location: western Washington
Posts: 2,647
Likes: 1
Liked 763 Times in 454 Posts
|
|
I owned two Charter Arms revolvers back in the mid-1980's, a blue 38 Undercover and a stainless 22 Pathfinder. While they were a good value & OK for "truck gun" use, they just weren't up to S&W standards. What with all the different guns/calibers available now, I think that ship has sailed, but it's a shame S&W didn't get on it back in the day & produce a similar but higher-quality small-frame 5 shot 44 snubby-- they'd have sold a bunch of them.
Last edited by hotrod150; 06-05-2014 at 11:32 AM.
|
The Following 2 Users Like Post:
|
|
06-03-2014, 03:54 PM
|
Absent Comrade
|
|
|
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,387 Times in 11,802 Posts
|
|
Quote:
Originally Posted by hotrod150
I owned two Charter Arms revolvers back in the mid-1980's, a blue 38 Undercover and a stainless 22 Pathfinder. While they were a good value & OK for "truck gun" use, they just weren't up to S&W standards. What with all the different guns/calibers available now, I think that ship has sailed, but it's a shame they didn't get on it back in the day & produce a similar but S&W-quality small-frame 5 shot 44 snubby-- they'd have sold a bunch of them.
|
To make them "up to S&W standards" would have jacked up the price a lot. One of the things many people have found appealing about the CA guns, especially the Bulldog, is that they're relatively inexpensive revolvers that work.
Everybody I know personally who owned one of the older Bulldogs says essentially the same thing: "Yeah, fit and finish aren't all that great, but they always shoot and they make great big holes."
So I guess the question becomes, when will S&W come back to a .44 Special snubby? I'm not holding my breath.
__________________
Oh well, what the hell.
|
The Following 3 Users Like Post:
|
|
06-03-2014, 04:20 PM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: Badgerland
Posts: 2,376
Likes: 559
Liked 1,501 Times in 789 Posts
|
|
The closest Smith has come IMHO is the 396/396NG. The are a little larger than the 'Dog.
If you had to use one in anger, which would you rather they confiscate?
I carry the Bulldog. It's accurate enough (especially with a Crimson Trace grip).
Yeah the build quality is one notch above crud (maybe) but I trust it to not blow up in my hand (barely).
I use a Mernickle holster for it.
Open carry, there is no question, the 396 wins.
BTW both the 696 and 396 fit well in the holsters that were made for the 3" 24 and 624.
The 396 won't necessarily fit in a 696 holster because of the high front sight.
===
Nemo
|
06-03-2014, 07:29 PM
|
Member
|
|
|
Join Date: Apr 2013
Location: Mercer County, PA, USA
Posts: 1,661
Likes: 19,302
Liked 1,781 Times in 897 Posts
|
|
I have a 4" target model that I bought about 1978. It's on my short list for daily carry & it has never failed me. Once for grins & giggles I shot it at an IHMSA silhouette match. I got laughed at a lot, until I knocked over the first ram at 200 meters. That's accurate enough for me.
|
The Following 2 Users Like Post:
|
|
06-03-2014, 08:03 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Houston, Texas
Posts: 4,366
Likes: 9,270
Liked 6,421 Times in 2,229 Posts
|
|
I just traded for this pug last weekend. Bought a Barami hip grip at the same time because I love them for everyday carry.
I wear my 442 and the Bulldog at about 5:00 and they tuck well and are very comfortable, especially the J frame Smith.
The pug is now my truck gun, hopefully a coating of Eezox and the stainless steel will keep down corrosion, which is fierce, lying on the carpet behind my truck console. Every other gun I have had there, has rusted to some degree.
|
The Following User Likes This Post:
|
|
06-03-2014, 11:06 PM
|
|
Member
|
|
|
Join Date: Aug 2005
Location: Gun lovin\' Hollywood Ca.
Posts: 10,234
Likes: 7,741
Liked 18,710 Times in 3,792 Posts
|
|
Quote:
Originally Posted by buser
|
Old school cool...
__________________
Thirty characters. Exactly...
|
The Following 5 Users Like Post:
|
|
06-03-2014, 11:22 PM
|
|
Member
|
|
|
Join Date: Dec 2006
Location: MI
Posts: 1,426
Likes: 29
Liked 1,013 Times in 231 Posts
|
|
__________________
ΜΟΛΩΝ ΛΑΒΕ
|
The Following 17 Users Like Post:
|
627 city hunter, Cocked & Locked, CWH44300, DevilDog72, Duster340, ironhead7544, Jessie, JohnHancock, M.Cunningham, mc5aw, MOONDAWG, Muley Gil, neubert500, Papaw, pete950, Rick_A, Shorty 45 MK2 |
06-05-2014, 11:39 AM
|
|
Member
|
|
|
Join Date: Sep 2012
Location: western Washington
Posts: 2,647
Likes: 1
Liked 763 Times in 454 Posts
|
|
Quote:
Originally Posted by shouldazagged
....... One of the things many people have found appealing about the CA guns, especially the Bulldog, is that they're relatively inexpensive revolvers that work. Everybody I know personally who owned one of the older Bulldogs says essentially the same thing: "Yeah, fit and finish aren't all that great, but they always shoot and they make great big holes.".......
|
The fit & finish issues I could have lived with. But as I recall, while the single-action trigger wasn't too bad the double-action trigger on both my Charter revolvers was terrible. Pretty hard to hit the target when you need to use two fingers to pull the trigger. Never had a try at tuning either one of them up so don't know if they can be easily improved or not.
|
06-05-2014, 11:42 AM
|
|
Member
|
|
|
Join Date: Jul 2012
Location: Las Vegas
Posts: 1,026
Likes: 332
Liked 1,906 Times in 523 Posts
|
|
Quote:
Originally Posted by Kilibreaux
I have one nestled into the glovebox of my car at this moment, and when needed I drop it into a front pocket...absolutely. That IS the strong suit of the CA .44 Bulldog! Tremendous blasting power in a light, compact revolver that is EASY to carry concealed!
|
+1
Couldn't agree more.
|
06-09-2014, 12:08 PM
|
|
US Veteran
|
|
|
Join Date: Oct 2006
Location: REPUBLIC OF WEST FLORIDA
Posts: 15,230
Likes: 3,020
Liked 3,451 Times in 1,625 Posts
|
|
Quote:
Originally Posted by Two Guns
My Primary Carry Revolver is an old 3 inch Charter Arms Bulldog in 44 special. I was just wondering if any one else carries these nice light 44 specials?...
|
When I worked Homicide in the early 1980's I carried one, because being a dyed in the wool "Cooperite" no one made a 19 oz. .45 ACP revolver.
About the only commerical round available then was the 246 gr. RNL, so I loaded a Sierra 210 gr. JHP behind a moderate dose of Unique over CCI primers.
Today the only Charter Arms I still carry is their fairly newly release CARR Pit Bull in 9mm. Due to it's patented star extractor (similar to the defunct S&W M-547) it does not require moon clips for extraction. It's also great for those days with this old fart doesn't feel like "stooping over & picking up" brass.
__________________
NULLI SECUNDUS
Last edited by MOONDAWG; 11-16-2014 at 11:49 AM.
|
The Following 3 Users Like Post:
|
|
06-09-2014, 07:43 PM
|
|
Member
|
|
|
Join Date: Aug 2013
Location: Virginia
Posts: 8,865
Likes: 10,603
Liked 15,210 Times in 5,253 Posts
|
|
Quote:
Originally Posted by whitecoyote
|
I see you had yours bobbed,as did I, and ported. Is that a satin hard chrome job on it? Looks good.
|
06-09-2014, 07:47 PM
|
|
Member
|
|
|
Join Date: Dec 2006
Location: MI
Posts: 1,426
Likes: 29
Liked 1,013 Times in 231 Posts
|
|
Quote:
Originally Posted by Jessie
I see you had yours bobbed,as did I, and ported. Is that a satin hard chrome job on it? Looks good.
|
Yes hard chrome finish. Barrel is 1.75". Trigger is silkey smooth.
Mag-Na-Port did all the work.
__________________
ΜΟΛΩΝ ΛΑΒΕ
Last edited by whitecoyote; 06-09-2014 at 07:57 PM.
|
The Following 8 Users Like Post:
|
|
06-17-2014, 04:26 PM
|
Member
|
|
|
Join Date: Sep 2012
Location: Arizona
Posts: 2,234
Likes: 2,813
Liked 5,798 Times in 1,453 Posts
|
|
As a result of this thread I went out and bought a new one, here is my review: The Charter Arms Bulldog 44 Special | The Desert's Edge
I am very happy with it and plan to carry it more often as a winter revolver.
It is now added to my small revolver collection:
Last edited by eb07; 06-17-2014 at 04:34 PM.
|
The Following 9 Users Like Post:
|
|
06-20-2014, 04:33 PM
|
Member
|
|
|
Join Date: Sep 2012
Location: Arizona
Posts: 2,234
Likes: 2,813
Liked 5,798 Times in 1,453 Posts
|
|
I took it out today with the new Combat grips.
Summed up from my updated writeup:
Quote:
I took it out for an extended range session with the new Charter Combat Grips and it wasn’t as bad as I had expected. Emptying a cylinder full of the 200gr Speer Gold Dots with one hand was controllable and accurate. The 240 and 225gr loads were a bit more and you could feel the backstrap in your hand. But nothing like my little 357 with full house loads. I definitely will use the Pachmayr’s for extended range sessions and for desert carry, and keep the Combat Grips on for concealed carry. Here is a video demonstration of recoil:
|
You can feel it but it is manageable. I won't be doing any extended range sessions with them.
|
The Following 5 Users Like Post:
|
|
06-20-2014, 05:52 PM
|
Member
|
|
|
Join Date: Oct 2000
Location: NW Wi
Posts: 2,549
Likes: 3,598
Liked 3,136 Times in 1,326 Posts
|
|
Before current set up, carried a Taurus 445 ul with custom loaded 200 gn gdhps. Found some older smaller grips for it, and got a Theis hybrid holster for it. Light enough, but needed heavier fall/winter shirt to conceal it as effectively as 45 xds.
Find it comforting to carry a larger bore.
Just checked and Theis makes a holster for the 44 bulldog, however might put a hurting on good finished revolver.
Last edited by zeke; 06-20-2014 at 05:59 PM.
|
06-25-2014, 11:12 PM
|
Member
|
|
|
Join Date: Jan 2013
Location: Illinois
Posts: 527
Likes: 1,128
Liked 477 Times in 185 Posts
|
|
Yes. Love my Bulldog. It's my primary warm weather, bumming around in the woods, hiking, fishing with the kids carry piece.
Yep, I pulled that one shot LOL
|
The Following 8 Users Like Post:
|
|
|
|
Tags
|
380, 696, beretta, cartridge, ccw, centennial, combat masterpiece, crimp, engraved, extractor, k frame, masterpiece, rossi, ruger |
Posting Rules
|
|
|
|
|