Whats your latest purchase? "guns/accessories"

AzShooter · #**2201** 01-12-2018, 12:35 AM

Newest build, Ruger Mark IV 22/45 Lite with Volquartsen LLV 6 inch barrel, VQ internals, Tandemkross Victory Trigger and Halo Bolt Rackers, C-More Railway Sight with 6 minute Dot, VQ Compensator.

And it shoots well too. I'm going to try it with an old scope that I have to see if I can get better groups.

2152hq · #**2202** 01-12-2018, 01:37 AM

Dutch Model 95 Infantrie Long Rifle 6.5x53R.
A little rough around the edges and missing the clearing rod,,but not bad. Goes bang and hits the 100m target in a quick range test in 5* weather.
More fun when spring comes.,,,Maybe the bore will get shinier by then too.

Savage 219 single shot break open rifle 22Hornet. Doesn't work, won't close. Multiple Weaver N mount D&T holes in the side of the bbl.
First model, (striker fired) (which is what I was looking for).
Want to restock, rework frame to elliminate the side scallope look, engrave , checker, add scope mounts and a nice 3/4 or 7/8"d scope. Something like the one John Madole did some years ago. His work always caught my attention.

MCorps0311 · #**2203** 01-12-2018, 02:37 AM

My two gifts and my one buy on 1-2-18.

photodad1970 · #**2204** 01-12-2018, 03:28 AM

It was a Fobus Evolution Paddle Holster for my SD9VE that the wife and kids got me for Christmas. Loving it so far, have a good gun belt for support and if wearing a longer shirt it hides well.20180108_154040.jpg

SuperMan · #**2205** 01-12-2018, 06:10 AM

1966 Bearcat...

Andyd · #**2206** 01-12-2018, 08:03 AM

I just received my latest Korth. This one is a 36 series rimfire revolver, made in 1986 in Ratzeburg, the old fashioned way. I will take it to the range for a test tomorrow and check it out. It has the target micrometer rear sights and patridge front sight that should help with the sight picture.

BE Mike · #**2207** 01-12-2018, 11:55 AM

Quote:

Originally Posted by AzShooter

Newest build, Ruger Mark IV 22/45 Lite with Volquartsen LLV 6 inch barrel, VQ internals, Tandemkross Victory Trigger and Halo Bolt Rackers, C-More Railway Sight with 6 minute Dot, VQ Compensator.

And it shoots well too. I'm going to try it with an old scope that I have to see if I can get better groups.

Maybe I missed it. What distance were you shooting and did you measure the group sizes?

SailDesign · #**2208** 01-12-2018, 12:21 PM

Quote:

Originally Posted by BE Mike

Maybe I missed it. What distance were you shooting and did you measure the group sizes?

And was this rested or offhand...?

Details matter when others are thinking "Can I do that well with mine?"

Chubbo · #**2209** 01-12-2018, 06:43 PM

Here's my last gun purchase. A Weihrauch #HW100S FSB .177 Cal. Air Rifle. I bought it in 2015, It cost more than any other gun, that I own. Then I added an Air tank, filling accessories, mounts, special Air Rifle, rated Scope, and a lot of related accessories, Used two fillings of air in it's built in tank, that winter, and haven't shot it since. How is that for a waste? Old age sneaks up on us all.

Chubbo

gonerydin · #**2210** 01-12-2018, 07:24 PM

Quote:

Originally Posted by Chubbo

Here's my last gun purchase. A Weihrauch #HW100S FSB .177 Cal. Air Rifle. I bought it in 2015, It cost more than any other gun, that I own. Then I added an Air tank, filling accessories, mounts, special Air Rifle, rated Scope, and a lot of related accessories, Used two fillings of air in it's built in tank, that winter, and haven't shot it since. How is that for a waste? Old age sneaks up on us all.

Chubbo

That is a very nice set up. I have a number of air guns that I shoot occasionally. Most are CO2. No PCP yet. PCP guns are really gaining popularity in the US. I bet you would have no trouble selling if you wanted to.

Sent from my iPhone using Tapatalk

RudyN · #**2211** 01-13-2018, 07:51 PM

I bought two needles for my Dreyse M65.

Sent from my iPad using Tapatalk

hkcavalier · #**2212** 01-13-2018, 09:03 PM

This pre 39.

bushmaster1313 · #**2213** 01-13-2018, 09:37 PM

I am on recent WWII kick

Aviator timer (to calculate ground speed)

Survival compass

Disc Speed indicator for Norden Bombsight

AzShooter · #**2214** 01-14-2018, 01:22 AM

Quote:

Originally Posted by BE Mike

Maybe I missed it. What distance were you shooting and did you measure the group sizes?

Distance is 25 yards from a rest. I did not measure the groups but they look pretty tight to me. I'll have to do it again and bring a ruler.

moralem · #**2215** 01-14-2018, 03:35 AM

Well, I finally got a big bore AR. Beowulf .50 upper mated to a Colt M4 lower. MBUS iron sights with a vortex SPARC II. Just waiting on my Witte machine muzzle brake to Finnish the gun out.

Muzzle brake, completing the big bore....now I just need to find a place to shoot. All of my local outdoor ranges won’t let me shoot the .50, and here I am in Texas the land of expanse....go figure.

SailDesign · #**2216** 01-14-2018, 07:28 PM

Sauer & Sohn 38H has landed - seen here with new grips to preserve to originals.

Not fired yet - but have cleaned and am checking action before dropping anything that goes "Bang" in it.

SMK · #**2217** 01-14-2018, 10:13 PM

Its been a busy week. Normally I buy a gun or two a year. This week I bought three. The last one was this

jbtrucker · #**2218** 01-17-2018, 10:58 AM

Restocking gun maintenance supplies, ordered a 200ct pack of Ramrodz 9mm/.38 to try out. 4- 16oz cans of 100 year Anniversary Rem oil and coupe of bottle Hoppes9 at Wally world,should be enough for 2 or 3 years with pistols. Previous purchase was a used SD9VE from LGS and 400 rounds 9mm on sale Freedom Munitions.

rickflst · #**2219** 01-17-2018, 09:43 PM

Just picked up a Colt Competition 70 in 9mm. Looking forward to taking it to the range this weekend!

Barrie · #**2220** 01-21-2018, 09:55 PM

Last month I finally got my dream gun which is a model 627 in 357 which is a PC model revolver with a 8 shot cylinder in it. I put new KDS Grips on it and the gun is done is stainless finish. Only took 8 years of saving for this one but its worth it.

Cardboard_killer · #**2221** 01-21-2018, 11:49 PM

Posted elsewhere, but here it is again--S&W model 13-2 (nickel plated) with culina grips.

BE Mike · #**2222** 01-22-2018, 10:22 AM

Quote:

Originally Posted by AzShooter

Distance is 25 yards from a rest. I did not measure the groups but they look pretty tight to me. I'll have to do it again and bring a ruler.

Thanks. I'll bet that setup will do just as good at 50 yards!

fyimo · #**2223** 01-22-2018, 02:13 PM

My last gun purchase was a PSA AR-10 308 for $579 new when buying separate upper and lower.

jmace57 · #**2224** 01-22-2018, 03:56 PM

I won yesterday in an auction the following:

Really nice Model 6906
Nice Model 59
Really rough Model 39-2

Kurusu · #**2225** 01-22-2018, 04:47 PM

Still tangled in red tape in another EU Country.

Finally one of the third model Hand Ejectors( got the second model. And the first model is out of my paygrade in here). It's only a lowly (for the rich folks

) 6 inch model 28 with magnas. But...

BE Mike · #**2226** 01-22-2018, 05:01 PM

Just got my Silencerco Osprey 9 out of ATF jail! Going to wring it out tomorrow!

MCorps0311 · #**2227** 01-23-2018, 05:48 PM

I brought a box of 100 rounds Remington .38 Spl.+p 125 gr. today.

BC38 · #**2228** 01-23-2018, 10:02 PM

Do reloading supplies count?

I just bought
1600 240gr LSWC 44 cal bullets
1000 158gr LSWC 38/357 bullets
150 210gr Speer JHP 44 cal bullets
150 44 magnum brass
300 44 special brass
250 357 magnum nickel brass
1 pound W296
1 pound Bullseye
5 pounds 2400
6 pounds 700-x
3000 Large Pistol Primers
3 44 spl/mag MTM boxes
3 38/357 MTM boxes

All for $250. I figure I got at least $500 worth of stuff - maybe closer to $600 worth.

Dieseltech56 · #**2229** 01-23-2018, 10:05 PM

yeah i'll say you got a deal

nocents · #**2230** 01-24-2018, 01:12 AM

..........another HK 45c...which makes two now...since I haven't found a Shorty 45 that I could afford this is the next best option...especially at the price I scored it for......if S&W decided to make a 4th. Gen. 4513.....this would be IT

TeamPB · #**2231** 01-25-2018, 09:36 AM

With another CZ, a C97 B. Here it is clean and very happy after its first 150 rounds yesterday.

RudyN · #**2232** 01-25-2018, 11:48 AM

A 28 Gauge cleaning brush. Oh, and I also had my LGS order a Ruger SP101 in 9mm for me.

Cardboard_killer · #**2233** 01-25-2018, 01:27 PM

Prices are too dang low. I cannot resist. I've been thinking about this Florida Colt commemorative for years now, and snagged this one for the lowest price I've seen one go for since I've been looking. Not crazy low, but still it's basically a fancy Peacemaker with gold plated highlights and a wooden box to keep it together.

waffles · #**2234** 01-26-2018, 07:29 PM

Picked up these two old police guns recently

edit: not the CZ, that's a bit too old to be called latest

blue71 · #**2235** 02-02-2018, 10:43 AM

Wound up procuring a CORE PRO with two barrels and two mags per caliber topped by a FastFire III.

moosedog · #**2236** 02-02-2018, 05:45 PM

I picked this up today from a fellow who bought it, put the forend and laser on it but never shot it. It's the 20ga version of the Shockwave by Mossberg. I have one in 12ga which is MagnaPorted which makes a HUGE difference in recoil on these short ones. I really don't like the forend and laser so I'm putting the original on it and getting this one ported too. It flips, but not as bad as a 12ga.
I drove my cat nuts with the laser after shooting it.

BE Mike · #**2237** 02-02-2018, 06:45 PM

Quote:

Originally Posted by moosedog

I picked this up today from a fellow who bought it, put the forend and laser on it but never shot it. It's the 20ga version of the Shockwave by Mossberg. I have one in 12ga which is MagnaPorted which makes a HUGE difference in recoil on these short ones. I really don't like the forend and laser so I'm putting the original on it and getting this one ported too. It flips, but not as bad as a 12ga.
I drove my cat nuts with the laser after shooting it.

I put an aluminum forend on my Remington 870 Gatekeeper. The extra weight tames the recoil to the point that it is easy to control any 2 3/4" 00 buck or slugs. I put a Crimson Trace Rail Master on it, but haven't had a chance to give it a "shake down".

mrchuck · #**2238** 02-02-2018, 07:46 PM

The grips on my S&W Model 10 have never fit me.
Sooooo, I went on E-Bay, found a nice set of Pachmayrs,, and ordered them giving all the info, including that this revolver has a FLAT butt.
Not a round butt.
Sooooo,,,,,guess what arrived,,,,,???? ROUND BUTT !!!
Trying to contact Wholesale Hunter in Alabama, but their phone answerer
needs training as I get cut off when she attempts to transfer the call.

I am about to get my Dremel Tool out and do some removal of about 7/16" horizontally. Material is Goncalo Alve, and looks super hard.

Anybody done this ????

ky wonder · #**2239** 02-02-2018, 09:41 PM

been a while since I posted in this thread, but recently bought the estate guns of a old collector

a lnw/o box savage 340V in 225 Winchester with 7 boxes of factory ammo

a 2000 model 1895G marlin 45-70

a 1963 Remington 870 duck magnum with vr

a 1979 browning B2000 12 guage w vr

a 1956 browning 22 ATD with wheel sight

a Winchester 250 with wheel sight
all the above were as new without boxes
a early 80s 37 no dash in nickel w box

a colt 1911-2011 engraved colt 1911 with box and papers
a nickel BDA 380 with box and paper
none of the above guns appear to have been fired since leaving the plants

a very nice miroku Charles daly superior grade o/u 12 ga single trigger auto ejectors , 30" full over full, well used but well loved this was the guys duck gun

a custom built 30-06 hunting rifle built on a 1920 mauser 98, using a Winchester model 70 brl, beautiful royal blue job like the early pythons, with a nice monte carlo walnut stock with cheek pad, gold bead front sight with redfield peep on rear, the peep was taken off and he had it mounted for scope use later, this was his deer gun, again well used but well loved, and its a great example of what some early gun smiths were able to do

jag312 · #**2240** 02-03-2018, 11:50 AM

I just bought a Belgium Browning Challenger made in 1965. I never cared for a Ruger or a High Standard. A Colt Woodsman is too expensive. The Browning fits my hand, and it is fun to shoot. Also, I wanted one in 1965 but was too young to buy one.

ky wonder · #**2241** 02-03-2018, 06:56 PM

Quote:

Originally Posted by mrchuck

The grips on my S&W Model 10 have never fit me.
Sooooo, I went on E-Bay, found a nice set of Pachmayrs,, and ordered them giving all the info, including that this revolver has a FLAT butt.
Not a round butt.
Sooooo,,,,,guess what arrived,,,,,???? ROUND BUTT !!!
Trying to contact Wholesale Hunter in Alabama, but their phone answerer
needs training as I get cut off when she attempts to transfer the call.

I am about to get my Dremel Tool out and do some removal of about 7/16" horizontally. Material is Goncalo Alve, and looks super hard.

Anybody done this ????

might have confused them normal term is square butt

Dieseltech56 · #**2242** 02-03-2018, 07:11 PM

Bought a G2 frame today. I have 2 other G1 contender frames and I was worried the trigger wouldn't be as good. It's much better than my later angry cat frame.

I wanted a frame just for my 445 super mag barrel. I don't want to risk stretching out an older frame that I can't replace.

edit- the G2 trigger is NOT better than my angry cat frame, my angry cat frame just needed the trigger adjusted to take the creep out of it. Now it's like breaking a glass rod.

Nedroe · #**2243** 02-03-2018, 08:52 PM

Here is a link to the completed auction.

S&W 44 Magnum 4 Inch Barrel | eBay
Anybody see a problem with the listing? Here's a hint: It aint 4 inches long.

I have a 29 No Dash in need of a transplant waiting.

Ned

Dieseltech56 · #**2244** 02-04-2018, 07:50 PM

What is it? A five inch?

Amp · #**2245** 02-04-2018, 08:30 PM

Bought a Sport II for a low price.
No idea why.

RobzGuns · #**2246** 02-05-2018, 01:54 AM

CDNN was having a pretty good mag sale today, do I picked up a spare mag fro my WWII P38 and my 9mm 1911.

ky wonder · #**2247** 02-05-2018, 10:26 PM

added another colt to the family today

colt combat commander stainless

tlawler · #**2248** 02-05-2018, 11:07 PM

I just picked up a nice 342 Airweight from another forum member.

JohnRippert · #**2249** 02-06-2018, 09:07 PM

FifthWheel · #**2250** 02-07-2018, 03:57 AM

A new Remsport barrel for my new to me Hi Power. Apparently someone tried to dig a squib out of the original barrel with a pry bar.

I was able to lap the crown and shoot it but it has quite a scar and burr across one land and groove abou 1/4" from the muzzle. Surprisingly it didn't key hole but lacks accuracy.
So another $180 later it should be a good shooter, all other parts look pretty good.