Well I have a couple, but they're a lot more modern than most on here.

__________________
Psalm 27:2

Mine is a nine-round Mossberg 590 Special Purpose pump.

I guess you could call my 870 slug gun a "riot" gun. 20" barrel and screw in chokes.

I only have 2.

My Rem 1100 is Identical save the vent barrel.
We did these back in the 70's..pre Bennelli.

I'm loving this thread. Pictured below is my one and only humble example of, (if it counts as that is).. a Riot Shotty. It's in reality closer to a trench/style shotty sans a bayonet lug!

I picked her up for $375 out the door and rescued it from it's purchased configuration; which had a cheap/goofy rubber pistol grip and matching pump forearm.

I ordered a mint stock and forearm set from Numrich and promptly swapped out the cheap stock/forearm set and now it's much more usable in it's current format. This is especially true with 3", 15 count, Double OO Pellet loaded Winchester Buck rated at 1600fps. I installed a GG&G front sling attachment and a QD sling swivel on the buttstock. I left the sidesaddle shell carrier as it's quite usable and has good retention for 6 shells. Lastly, I installed a Mossy Heat Shield after running two full tubes at a sillouhette plate course and making the mistake of laying the barrel in front of the receiver over my shoulder after emptying the tube with the bolt and pump locked in the open position. Burned thru my T-shirt so bad I thought I was holding a branding iron on my trapezius/shoulder. I replaced the goofy fiber optic bead for a stock brass bead as well and have a Magpul MS1 dedicated sling for her. Lastly I replaced the magazine spring and follower with new ones with a tad more tension for more positive and smoother feeding. I like her a lot. I got the Mossy after trying to source an Ithaca Model 37 Police Special with a full tube with zero luck. I think it's a pretty good substitute but am always on the lookout for an Ithaca!

Yes I do, a Mossberg 500 Mariner that I used to carry on the boat in FL.

Wow, that Remmy 1100 is bad azz! That is set-up exactly how I would want if I had an auto shotty!!

You're a wise man. We were issued those, too and they kill on both ends fired from the shoulder. I actually preferred hip shooting them.

__________________
I need ammo, not a ride.

Years ago, I had an Ithaca with the long mag tube that came out of a Chicago squad car. The barrel was full of cigarette butts and gum wrappers. I cleaned it up and gave it to a good friend when he moved away.

I now have an Ithaca with the deer barrel with rifle sights. I also have a Remington 1100 SF with a 20" barrel. There is also a Winchester 1200 with a field barrel. I have looked for a short barrel, without any luck. I found a short 1400 barrel once, but it would not quite fit.

I don't have a factory riot gun but I have a 870 & 1100 slug guns
Also a Brn A5 cut down into slug gun and a 97 Win I cut to a little
less than 24" ( barrel was Bubbaed) and had it threaded for screw in chokes. Last, a 18 1/2" barrel H&R Hammerless SS 12g
beater. I don't need no stinking riot gun!

A 12ga Remington Model 11, a 16ga Stevens 620 and I passed on a 12ga Ithaca 37 to my retired Marine brother in law as well.

Ithaca model 37 for me too!

My old Model 12 has had a long life of riot work and pheasant hunting.

Yep, Remington 870 and a Winchester 1300 Defender. Plus a few cut to
riot gun length like my Winchester mods 12 & 25 and a JC Higgins (High
Standard). For fun try a round of Trap with a pump gun with an 18" cyl
bore barrel. It's good practice for learning to shoot very quickly and hit
something.

Remington 870 Police Magnum 20" Imp Cyl

__________________
C & L

Here's my TPS in all its "glory"...

Have an 870P (20”) and a newer (early 1990s) Ithaca 37, which I had cut down to about 20”. Latter has a vent rib barrel, which is why it is about 20”...

Had an 1897 Riot copy, and still have a PW87. The PW87 is definitely handy enough to qualify as a Riot gun.

Only thing I have better than a traditional Riot gun is my TAC-14...

I had a Remington Model 10, 20"bbl,, and a Stevens 520A 20"
Still have a Winchester M97, 26" cyl.
Not actually a Riot, Win called the
configuration a Brush Gun. But it's plenty handy.

They were all orig Field guns with 28" & 30" bbls that I cut down, moved the bead back, ect.

The way I understand what happened is as the safe door was forced open, the barrels slipped between the door and the safe body at the hinge side. As the door reached it's maximum end of the arc, the barrels were pinched

The owner of the gun shop sold me the piece, with the original box for $100.

I have only one. A Hawk 982. 18.5 inch cylinder bore, polymer stock, five round magazine tube. It's a cheap Chinese made knockoff of the 870, but it's a very robust gun. Well made. Smooth action - maybe smoother than the original (at least that's the case when compared to my 20 gauge 870. 100% reliable through several hundred rounds of mostly birdshot, with some buck. 3 inch chamber. Disassembles exactly like an 870, and most of the parts are interchangeable.

Did I mention it was cheap? Bought it for under $150 new about six years ago. It's not fun to shoot, though. My shoulder is sore after a magazine full. Still, I'd rather have a sore shoulder and be alive if I ever needed it.

__________________
Or something like that . . .

My KSG, loaded with 15 rounds of Federal LE Tactical #1 Buck. It's the primary home defense gun.

Old school yet very effective:
DSCF6414A.jpg

I just have an old beater S&W police riot gun behind the bedroom door. It's nothing special. The first round is a beanbag, followed by buckshot if that didn't get the point across.

I have a '97 Winchester cut to 18 1/2". In the tube, two 00 buck, followed by three slugs. It wears an ammo sling full of slugs and 00 buck.

I used to carry it in my patrol car.

__________________
John 3:16
WAR EAGLE!

Here’s my Remington 870 Special Field 21” barrel that I inherited from my Father-in-law. It’s from the 80’s. I had an extended mag tube on it at one time for home defense but have since taken it back to factory setup.

__________________
Get off my lawn!

Sadly, not yet. Although I plan to rectify that ASAP by purchasing a Mossberg Shockwave.

Here's a 16 gauge single shot I chopped down to just over 18".

I never saw a long barrel shotty I didn't want to chop down.



And here's a Vang Comp 12 gauge I bought about 2 years ago for $450. Didn't need another 12, but it was a heck of a deal for all the work it had done.





I've got a few more, but these are the only one's I've got pics of.

__________________
Watch & Pray

I actually love it. I shoot mostly 1-ounce slugs from an 870 Police Magnum. I have found that they are a freakin blast from that thing.
But it's spendy to shoot a lot of slugs.

I don't have any pics because I'm terrible at that.
Mossberg 500 8-shot.
Mossberg 590.
Mossberg 9200A1 (Jungle Gun).
IGA Coach Gun Deluxe. Not a riot gun, but it's short, handy, and effective.

My Jungle Gun is a funny one. Chambered for 2-3/4" and 3" shells, and the barrel is threaded for Accuchoke tubes. Came with a modified tube. I bought it second hand. It had a Choate mag extension and follower when I bought it. I bought and modified one of the clamp on sling mounts to use as a support for the tube extension. I also installed one of the fiber optic front sights that is a rod mounted on a split plastic tube that pops onto the top of the barrel and has a notch in the front to keep it centered with the front bead.

All the info I ever found from Mossberg indicated 2-3/4" ONLY and fixed choke barrel (cylinder bore, IIRC).
However, my barrel is clearly, factory stamped that it takes both shell lengths and that it is an Accuchoke barrel.
It is the heavy barrel, just like the other 9200A1s.
The label on the end of the box indicates also that it takes 2-3/4" and 3" shells and is equipped with an Accuchoke barrel.

__________________
What would Jim Cirillo do?

I have a few -
2 mossbergs - 590, 590a1 - fluted barrel
2 Police Mag 870s
1 Westernfield/Mossberg 500 sold to me with a chopped 20" barrel
1 870 ringmaster parts gun reassembled as a riot
1 Benelli M1/S90
1 Factory WW2 era ordnance marked Rem 11 riot - non matching
1 Saiga 12

1 Remington 11/48 needing a barrel - soon to be a riot.

Most are police trades.

__________________
Thread Killer.

Have a couple, 500 Moss with all the bells and a Winchester lite weight Aluminum receiver 18 inch. no recoil pad!! KICKS. Originally attached to the dash of a friends cruiser.

__________________
"I'm feeling MUCH better now"

If you like short barreled shot guns you need a book to go with them

__________________
SWCA 1932 SWHF 135

Posted quite a few years back, so I will post it again. It is a first 6 month production wingmaster with a dated XX 20” riot barrel and serial number barrel matching the gun. My great great uncle had a tang safety added to it.








Sent from my iPhone using Tapatalk

I have 2 and neither are very fancy. A plain 500 for the bride and an 870 Marine magnum for me!

Attached Images

	Mossberg (Copy).jpg (86.2 KB, 24 views)
	20180125_001700 (Copy).jpg (101.3 KB, 33 views)
	20180125_001643 (Copy).jpg (114.0 KB, 26 views)

__________________
Dan
Ps 96 SWCA 2930 SWHF 524

I have several, and with a hacksaw and a few minutes I could have more.

__________________
Isaiah 41:10

The 870 Express doesn't get much love here it seems. There are only about 3 parts that are different on it than what are on a Police model. They can be upgraded for about $35. They take a little longer to get broke in because the parts aren't polished but firing a few hundred rounds will generally fix that. And the finish can be made to prevent rust if you know how. I have one I trust completely.

I have a second riot gun. It's almost a clone of the 870. It's a NEF Pardner Protector. It's a Norinco copy of the 870 except the barrel lug is in a different spot. You can swap parts with an 870 except for barrels. That gun is very nearly as good as the 870. It's a little heavier which some might think is a good thing. It functions perfectly.

I keep 00 buck in one of the two and slugs in the other. I live where there are a good number of black bears and they tend to want to threaten me when I cook on the grill. So I keep the shotgun with slugs handy just in case. It's never gotten past lip smacking threats but they sure do want what I'm fixing and they will try to scare me away from it.

I have a 12 ga. Ithaca 37 Featherlight Stakeout marked (CGPD), probably Coast Guard Police Department.

__________________
SWCA #3713

Or Casa Grande (AZ) Police Department.

__________________
Thread Killer.

Or Cape Girardeau (MO) Police Department, who I know issued Ithaca shotguns at one time . . .

__________________
Wisdom comes thru fear . . .

UPDATED 1/13/19 Several digital images added see posts 160 and 161. Photography by Mark Calzaretta (COLT_SAA on this forum).

Yes, a genuine U.S. Trench Gun Winchester Model 1897 serial numbered near the end of WWII.

UPDATED: Bought this from a Retired Air Force Colonel about 25 years ago. It is in such excellent condition, I wondered if it had ever been issued or one of the very last when WWII was ending.

PS: When I purchased it I searched for over a year to find the correct Winchester bayonet in the same or near condition as the 97.. I finally found it at Sarco (New Jersey) back in about 1995.

Attached Images

	Trench Gun Ls.jpg (34.5 KB, 15 views)
	Trench Gun B.jpg (73.5 KB, 16 views)

__________________
ANTIQUESMITHS
LM1300 SWHF425

Post like that screams for photos!

__________________
Buy American
Vote Responsibly

I've had this Smith and Wesson 3000 for many years. Haven't fired it in a while - the recoil pad is hard as a rock!

Attached Images

smith and wesson 3000.jpg (63.3 KB, 50 views)

590 highly modified and accessorized, Magpul stock with check rest and Limbsaver recoil pad and Black Aces Quad Rail, green laser and strobe flashlight with micro switches, flip up iron Ghost Ring sights Hogue fore end, extended safety red aluminum mag follower with higher pressure spring in the tube, M9 bayonet (US issue) I shoot 2 3/4" deer slugs...side arm is a Smith & Wesson 9mm Shield also modified, green CT laser Hyve 10 rd mags, Recoil Reduction System, Hyve trigger, Hyve extended mag release, I carry 5 mags for a total of 50 rds 147 gr Critical Defense loads. When the Zombies come I'm ready for them...for the Vampires I have a Garlic necklace I wear

Yep.



My 870 Police tucks away into its nook by the bed each night, ready for instant action. Going to eventually run ghost ring night sights on the bbl and maybe have the gun cerakoted.

When I put the slug barrel on my 870 it becomes a riot gun.

Easier said then done. But Colt_SAA is coming over this weekend to photo a few for me. Perhaps we can get to this one, too.

__________________
ANTIQUESMITHS
LM1300 SWHF425

Will this do? I made this up a long time ago (1988). It is my copy of a USMC M870 MK1. I found the barrel, extension tube and front sight at a gun show in S.Calif, while stationed there. I bought a Remington 870 Express at a LGS(Big 5 Sporting Goods?). Put it all together myself (not to hard) and used it teaching Combat Shotgun Courses to the Navy at Naval Station Long Beach.

Attached Images

	870-2 (2).jpg (54.8 KB, 55 views)
	870-1 (2).jpg (154.2 KB, 56 views)

__________________
USMC 69-93 Combat Pistol Inst.

...we have some short barrel shotguns around here...

...three pumps...Winchester...Mossberg...and H&R...

...and two double barrels...Stoeger and Cimarron...

...one 20 gauge pump...the rest are 12 gauge...

...I love the double barrels...

__________________
A Country Boy Can Survive

It's in the closet. Pistols and rifles are locked up;.