The hammer spring cap came out of my LCP Max. I don’t know if the pin broke or what? Are there any videos that show how to replace it? I didn’t find any on YouTube.

__________________
otis

Never mind.I found a video.

__________________
otis

So was it the pin or the cap?

__________________
Release the Kraken

Both. All that I know is that I inserted a magazine yesterday and noticed that it was missing. I can’t remember if I last carried it in a pocket or IWB. I will search pants pockets and the floor around my bed when I get back home.

Two things that I have noticed about the LCP Max; first is that I have to give the magazine a firm tap on the bottom to seat the magazine. Second is that when I rack the slide to chamber a round, I have to tap the slide forward to get it to seat. I don’t know if this is normal or not. It could be that in tapping the magazine in, I jarred the pin loose.

I do have a Hyve magazine extension on my primary carry mag. This covers the hammer cap area. But I had the magazine and slide issues prior to the installation of the Hyve magazine extension.

__________________
otis

Factory ammo out of spec? The other thing is that in squeezing so many rounds into small guns, I reckon a tolerance stack the wrong way can make operating them in +1 mode a bit tricky.

__________________
Release the Kraken

I always just load the mag to capacity. Never +1.

__________________
otis

Me too. Insert mag and chamber the top round.

__________________
Regards,

Tom