|
|
03-10-2024, 11:31 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2003
Location: Idaho
Posts: 977
Likes: 1,965
Liked 1,553 Times in 336 Posts
|
|
West German Walther P1
Picked up a Walther P1 a few days ago. It's one of the Bundeswehr models with a date of manufacture of 03/79. It's in great shape and came with four magazines. It's not a WWII P-38 but it's very close and I'm happy. One of the guns that I've thought: "gee it would be nice to have one in my safe" but then always made an excuse to get something else. Finally ran out of excuses. I paid $900.00 for it. Not a great deal, but sometimes you do that if you want an item enough. That's capitalism, right? Besides I had the green light from my wife. I'm not suicidal after all.
__________________
I type. Therefore I am.
Last edited by Checkman; 03-10-2024 at 11:37 PM.
|
The Following 18 Users Like Post:
|
.455_Hunter, Aggie1906, Andyd, cndrdk, desi2358, dsf, hs125, jframejoey, LVSteve, M1A, Malysh, old tanker, OLDSTER, Pocketrocket, robvious, serger, TJm15.38, zeke |
03-11-2024, 12:04 AM
|
Member
|
|
|
Join Date: Jan 2006
Location: Escaping CA to OR in 2024
Posts: 1,188
Likes: 1,167
Liked 1,470 Times in 593 Posts
|
|
Everyone ought to have one, yes?
I bought a 1965 made one a few years back. Nice to have a gun which uses mags that don't cost an arm and a leg - unlike the Steyr GB or P88 occupying space in my safe.
I found the DA pull much better than described.
|
The Following User Likes This Post:
|
|
03-11-2024, 12:27 AM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,789
Likes: 2,492
Liked 8,331 Times in 2,925 Posts
|
|
The P38/P1 are iconic firearms, every enthusiast should own at least 1.
The advantage of the late production guns like the OP's is the strengthening cross bolt in the frame, thicker slide rails and the two white paint dots for easy sighting.
An interesting tidbit is that the Walther P4 uses the same magazine, also if you are lucky enough to pick up a Walther P5 you can use the old P38 mags by ordering a P1 mag release and installing it on the P5,
it was designed that way on purpose IIRC.
|
The Following 7 Users Like Post:
|
|
03-11-2024, 12:50 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2003
Location: Idaho
Posts: 977
Likes: 1,965
Liked 1,553 Times in 336 Posts
|
|
Quote:
Originally Posted by dsf
I found the DA pull much better than described.
|
Yes I was also surprised and pleased by the DA trigger.
__________________
I type. Therefore I am.
|
The Following User Likes This Post:
|
|
03-11-2024, 12:59 AM
|
Member
|
|
|
Join Date: Sep 2018
Posts: 6,825
Likes: 13,300
Liked 15,862 Times in 4,997 Posts
|
|
Great guns. I had one many years ago.
__________________
No baby we aint
|
03-11-2024, 04:28 AM
|
Member
|
|
|
Join Date: Jun 2009
Location: Germany
Posts: 354
Likes: 472
Liked 620 Times in 156 Posts
|
|
carried one when on guard duty during my Bundeswehr time in the 1980's. on the range it would perform fawlessly and very accurate even at 25 meters. do not let the slide rush forward on an empty chamber, this will ruin the locking mechanism
regards from Germany
Ulrich
__________________
Life is too short to own a bad gun
|
The Following 13 Users Like Post:
|
Aggie1906, Checkman, desi2358, Engine49guy, hs125, Marshwheeling, max, murphydog, old tanker, robvious, Rotorhead1026, serger, SGT ROCK 11B |
03-11-2024, 07:22 AM
|
Member
|
|
|
Join Date: Oct 2006
Posts: 5,788
Likes: 1,250
Liked 5,842 Times in 2,367 Posts
|
|
The Walther P-1 takes their 22 conversion unit (if you can find one), doesn't fit on the steel frame ones alas.
|
03-11-2024, 07:38 AM
|
Member
|
|
|
Join Date: Apr 2011
Posts: 172
Likes: 6
Liked 148 Times in 47 Posts
|
|
had several original WW11 issue over the years, but kept my P1. Great accuracy and easy to shoot well. My 13 year old grandson lives it.
|
The Following User Likes This Post:
|
|
03-11-2024, 12:18 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2003
Location: Idaho
Posts: 977
Likes: 1,965
Liked 1,553 Times in 336 Posts
|
|
Quote:
Originally Posted by Daimler1989
carried one when on guard duty during my Bundeswehr time in the 1980's. on the range it would perform fawlessly and very accurate even at 25 meters. do not let the slide rush forward on an empty chamber, this will ruin the locking mechanism
regards from Germany
Ulrich
|
It will enjoy a comfortable life in my safe. With the exception of the occasional trip to the range for a leisurely shooting session of 30 - 60 rounds of standard pressure 124 grain FMJ rounds.
__________________
I type. Therefore I am.
|
03-12-2024, 01:40 PM
|
Member
|
|
|
Join Date: Sep 2005
Posts: 7,753
Likes: 1,643
Liked 9,159 Times in 3,383 Posts
|
|
I have one I bought many yrs ago, a P1 dated (19)69.
It has the narrow slide and no re-inforcement bolt. But it
hasn't fallen to pieces as of yet.
It likes Rem-UMC 115gr FMJ
One of my favorite pistols, I can still pull the slide back on it!
Very accurate and functions flawlessly. I carry it quite a bit as well.
The one Walther War-time orig left pretty much stays in the safe now.
|
The Following User Likes This Post:
|
|
03-12-2024, 03:45 PM
|
|
Member
|
|
|
Join Date: Feb 2015
Location: 1945
Posts: 1,091
Likes: 2,268
Liked 1,859 Times in 630 Posts
|
|
Although I don't care for 9mm, I bought the P4 some years back, and I really like it. Quick and accurate. Shorter barrel and no safety. Otherwise about the same as the P1. Walther seems to like a lot of little springs.
__________________
"from my cold dead hands" C.H.
|
03-12-2024, 05:15 PM
|
Member
|
|
|
Join Date: Aug 2005
Posts: 7,610
Likes: 4
Liked 8,963 Times in 4,155 Posts
|
|
Quote:
Originally Posted by M1A
Although I don't care for 9mm, I bought the P4 some years back, and I really like it. Quick and accurate. Shorter barrel and no safety. Otherwise about the same as the P1. Walther seems to like a lot of little springs.
|
I'm in agreement. I bought a P4 about thirty years ago. I don't know about jacketed bullets, but it shoots cast quite accurately and will feed virtually any nose style configuration. Mine is seldom fired anymore, maybe once a year. I'm not a 9mm disciple either.
|
03-12-2024, 05:17 PM
|
Member
|
|
|
Join Date: Mar 2023
Posts: 834
Likes: 1,097
Liked 914 Times in 453 Posts
|
|
I worked with a cop who back in the 1980s carried a P1 as his off duty gun.
|
03-12-2024, 09:10 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Eastern Nebraska
Posts: 3,946
Likes: 10,476
Liked 8,455 Times in 2,923 Posts
|
|
post war P1/P38 are fun guns... don't shoot anything too hot and you should be good... I always wanted a Hogan Heroes pistol... so a looong time ago I picked up a P1 & a P38... and yes.. get some extra recoil springs if you plan on shooting it...
|
The Following User Likes This Post:
|
|
03-13-2024, 12:57 AM
|
Member
|
|
|
Join Date: Dec 2003
Location: HOUSTON, TEXAS
Posts: 10,196
Likes: 7,181
Liked 14,388 Times in 5,419 Posts
|
|
One of those guns that a 9mm guy needs.
|
The Following User Likes This Post:
|
|
03-13-2024, 01:19 AM
|
|
US Veteran
|
|
|
Join Date: Jun 2015
Location: NE FL
Posts: 1,904
Likes: 1,413
Liked 4,044 Times in 1,264 Posts
|
|
The very first pistol I owned was a Walter P-1. Great pistol, lots of fun to shoot…….That was a long time ago. Traded it for another great pistol — a Browning High Power (P-35). Still have it.
__________________
"Your other right........."
|
03-13-2024, 01:23 AM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,789
Likes: 2,492
Liked 8,331 Times in 2,925 Posts
|
|
Quote:
Originally Posted by HOUSTON RICK
One of those guns that a 9mm guy needs.
|
That one's date stamped 2/64
Check the left side roll stamps as that one might be old enough to be marked as a P-38
|
03-14-2024, 11:33 AM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,789
Likes: 2,492
Liked 8,331 Times in 2,925 Posts
|
|
Was surfing the net today noticed Atlantic Firearms has former German pd P1 Pistols for $500 to those in the market.
Walther P38 9MM Pistol SALE - AtlanticFirearms.com
|
03-14-2024, 03:25 PM
|
Member
|
|
|
Join Date: Sep 2005
Posts: 7,753
Likes: 1,643
Liked 9,159 Times in 3,383 Posts
|
|
Quote:
Originally Posted by Engine49guy
|
Look like skinny slide and w/o the reinforcement pin.
But FWIW, mine is exactly like that and it hasn't imploded in the 30yrs I've owned and shot it. Great pistol IMO.
Price isn't probably too bad from what I've been seeing around at some shows. But I don't get out as much as I used to.
AIM just had a bunch but quickly SoldOut at $550.
Same narrow slide/non-reinforced frame.
You're not going to find 'em for $150 any more.
|
03-14-2024, 11:36 PM
|
|
Member
|
|
|
Join Date: Feb 2014
Location: Washington State
Posts: 1,410
Likes: 618
Liked 1,721 Times in 630 Posts
|
|
Good on ya, mate. As I've read here you didn't pay too much, you just bought a bit early.
I got on a Walther jag a while ago and when I checked the safe the tally is 2 P-1s (one German and the other Manurhin); a P-4 and a P-5.
All come out a couple of times a year for some range fun. I wish the P5 weren't so valuable as it is one of the best engineered, slickest slide pistols I own and I'd carry it in a heartbeat -- except -- my heart would break if it were in some evidence locker for a few years. Plus there are plenty of great carry guns that do the job just as well.
My only caution: you might want more of these classic Walthers. It's what happened to me. (And if I could find an affordable-to-me 88, I'd be on it like a cold sweat.)
|
The Following User Likes This Post:
|
|
03-14-2024, 11:43 PM
|
|
Member
|
|
|
Join Date: Feb 2014
Location: Washington State
Posts: 1,410
Likes: 618
Liked 1,721 Times in 630 Posts
|
|
Forgot the pics.
|
The Following 2 Users Like Post:
|
|
03-15-2024, 09:06 AM
|
|
Member
|
|
|
Join Date: Nov 2003
Location: Texas
Posts: 1,477
Likes: 2,002
Liked 3,443 Times in 936 Posts
|
|
If you have seen enough surplus P1 it becomes apparent, that few survived with the same parts they had when they left the factory. We shot the guns with the same 9mm Nato ammo that we used in the Uzi. I have a couple of extra slides and a new locking block for my P38 - just in case.
FWIW, the average scores improved when the Bundeswehr went from the P1 to the HK P8A1 but the top shooters were not affected. I still like shooting the P38 and still enjoy it after all the decades. Even in .22 it is a fun gun.
__________________
FFL08
|
The Following 2 Users Like Post:
|
|
03-15-2024, 11:17 AM
|
Member
|
|
|
Join Date: Mar 2015
Location: down South
Posts: 951
Likes: 975
Liked 795 Times in 476 Posts
|
|
Have a P1 with the fat slide and hex bolt. When I got it and took it to the range I realized the springs were shot. Ordered some new spings and had them installed. After that it was totally reliable and very accurate. The only thing I don't like about it is the heel magazine release which I found which I found very awkward to use.
I currently have it on consignment at a local indoor range & LGS since I have been trying to thin the herd a bit (or free up some $$$ for something else). It has been on consignment now for around nine months or so and I have lowered the price once. So far as I know, it hasn't yet sold. I realize some of the online sellers have some marked P38 for less that I have mine priced.
I think it is great range gun with a historically interesting design. This thread has me wondering if I need to go get it out of consignment, assuming it has not sold recently.
|
03-15-2024, 11:36 AM
|
Member
|
|
|
Join Date: Aug 2005
Posts: 7,610
Likes: 4
Liked 8,963 Times in 4,155 Posts
|
|
Quote:
Originally Posted by HOUSTON RICK
One of those guns that a 9mm guy needs.
|
Yes, especially if you're an advocate of the 9mm cartridge. Hard to see any advantage newer and allegedly more modern pistols have over this design.
|
The Following User Likes This Post:
|
|
03-15-2024, 12:50 PM
|
Member
|
|
|
Join Date: Aug 2009
Posts: 1,129
Likes: 36,514
Liked 937 Times in 498 Posts
|
|
I've owned several of the post war P-38/P-1 models and a couple wartime guns as well. I've always liked the "feel" of the gun, they seem to fit my hand and function very well. Just picked up another one last week at a local shop that was traded in. A rebuild, the slide and barrel are from one gun the frame from another. Reinforced frame and fat slide and seems to have new springs installed. Very tight action, 115gr. loads barely clear the slide, 124gr. cycles much better with more positive ejection. Accurate too, easy to keep the 25 yard steel swinger bouncing!
|
03-15-2024, 03:00 PM
|
Member
|
|
|
Join Date: Sep 2005
Posts: 7,753
Likes: 1,643
Liked 9,159 Times in 3,383 Posts
|
|
I noticed that the recoil spring guides on my P1 are getting a bit worn at the front end where they engage the cutout in the Frame.
They are some sort of plastic/nylon.
Probably should get a new set so they don't go flying away sometime when I take the slide off.
New springs would be treat for it as well.
For some reason someone cut the D-ring lanyard loop off flush with the frame.
Nice clean job,,didn't scratch the frame at all. The 'stubs are still in the frame and will punch out. Maybe a prior owner had fancy wooden grips on it that didn't include the lanyard loop in it's features.
The replacement loops are available, maybe one of those as well..add to cart.
This pistol is an Interarms import that I bought in the late 80's.
Parts are still available for these P1's. But like everything else in the surplus gun world,,someday that won't be so.
Magazines for the P1/P38 (postwar) are climbing in price too.
$40 to $50 seems to be the average asking price now.
|
03-15-2024, 04:41 PM
|
Member
|
|
|
Join Date: Jun 2009
Location: Germany
Posts: 354
Likes: 472
Liked 620 Times in 156 Posts
|
|
Quote:
Originally Posted by Redcoat3340
Forgot the pics.
|
I suggest you add this one to your collection
__________________
Life is too short to own a bad gun
|
The Following User Likes This Post:
|
|
03-15-2024, 06:56 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 8,457
Likes: 2,499
Liked 13,228 Times in 4,585 Posts
|
|
Well, let's hear it for the P-4.
I understand that the ones made for the US commercial market/for export, were marked "P38/IV" on the slide.
This P4 has no such markings, making it a police trade-in I imagine.
I haven't shot it in a long time but I recollect it being less than accurate.
__________________
Come and take it!!
|
The Following 2 Users Like Post:
|
|
03-15-2024, 07:31 PM
|
Member
|
|
|
Join Date: Aug 2005
Posts: 7,610
Likes: 4
Liked 8,963 Times in 4,155 Posts
|
|
Quote:
Originally Posted by ISCS Yoda
Well, let's hear it for the P-4.
I understand that the ones made for the US commercial market/for export, were marked "P38/IV" on the slide.
This P4 has no such markings, making it a police trade-in I imagine.
I haven't shot it in a long time but I recollect it being less than accurate.
|
I bought a P4 about thirty years ago. It's quite accurate with cast bullets; may be accurate with jacketed bullets as well, but I haven't fired any through it in quite a while.
Last edited by rockquarry; 03-16-2024 at 10:45 AM.
|
The Following 2 Users Like Post:
|
|
03-16-2024, 05:49 AM
|
|
Member
|
|
|
Join Date: Feb 2014
Location: Washington State
Posts: 1,410
Likes: 618
Liked 1,721 Times in 630 Posts
|
|
Quote:
Originally Posted by Daimler1989
I suggest you add this one to your collection
|
That P88 has been on my list for a looong time.
Just checked gunbroken and it's strange how the priceing goes. Some (with a day or three to go) are in the $700 range; others in the $2,000 range. I'd consider the $700...but over $1,000 is kinda out of my price range, especially when WA state has a 10% sales tax on dealer guns from out of state, plus FFL, plus shipping, and now plus an $18 charge from the State Patrol for the background check. If buying from an individual, no tax.
|
The Following User Likes This Post:
|
|
03-16-2024, 10:04 AM
|
Member
|
|
|
Join Date: Jun 2009
Location: Germany
Posts: 354
Likes: 472
Liked 620 Times in 156 Posts
|
|
Quote:
Originally Posted by ISCS Yoda
Well, let's hear it for the P-4.
I understand that the ones made for the US commercial market/for export, were marked "P38/IV" on the slide.
This P4 has no such markings, making it a police trade-in I imagine.
I haven't shot it in a long time but I recollect it being less than accurate.
|
you can check the front right side of the frame if there is a erased marking. IIRC the P4 was never adopted by the Bundeswehr and only in very small numbers by several federal state police units. Most of them should have been stored but never issued by the German Ministry of Interior for police purposes. They would have had am stamping BMI on right side of frame just above the foremost part of trigger guard. They were sold to Hämmerli Switzerland in the late 1980s, where the BMI stamping was erased, before the went to the civilian market.
regards
Ulrich
__________________
Life is too short to own a bad gun
|
03-16-2024, 12:45 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,789
Likes: 2,492
Liked 8,331 Times in 2,925 Posts
|
|
The P4 is an interesting variation that never really took off.
To those not familiar with the P4 while they look similar to the P1 with a slightly shorter barrel they have several very different features, this is all from memory as I'm too lazy to dig my P4 out right now lol...
The P4's big upgrade is that it can't be drop fired or fire with a worn firing pin during decock like the P38, the P4 has a system that raises the firing pin into battery as the trigger is pulled, there's also a hole cut below the hammer face that the firing pin rests in, btw those features carried over to the P5.
Another big one is that the safety lever is a spring loaded decocker so it doesn't remain down, no need for it to because of the trigger safety.
The area just ahead of the rear sight is different but can't remember how or why, as a side note the factory short barrel guns with the front sight on the slide front were made from P4's IIRC.
On a side note I've handled a few P88's thru the years but never fealt they were worth the huge premium they commanded compared to the P7M13 in the same range back in the day, well perhaps the Beretta 92 was as well but at much less, also was not crazy about the looks (striking resemblance to the Zastava CZ99).
Just Random thoughts,
Btw last time I handled one they were fetching $1k used when S&W 3rd gens were $350.
My guess is their high price and chunky look led to poor sales and their current rarity in the market, not sure but think clean P88s are about double today.
Last edited by Engine49guy; 03-16-2024 at 12:51 PM.
|
The Following 3 Users Like Post:
|
|
03-16-2024, 01:11 PM
|
Member
|
|
|
Join Date: Jun 2009
Location: Germany
Posts: 354
Likes: 472
Liked 620 Times in 156 Posts
|
|
Quote:
Originally Posted by Engine49guy
The P4 is an interesting variation that never really took off.
To those not familiar with the P4 while they look similar to the P1 with a slightly shorter barrel they have several very different features, this is all from memory as I'm too lazy to dig my P4 out right now lol...
The P4's big upgrade is that it can't be drop fired or fire with a worn firing pin during decock like the P38, the P4 has a system that raises the firing pin into battery as the trigger is pulled, there's also a hole cut below the hammer face that the firing pin rests in, btw those features carried over to the P5.
Another big one is that the safety lever is a spring loaded decocker so it doesn't remain down, no need for it to because of the trigger safety.
The area just ahead of the rear sight is different but can't remember how or why, as a side note the factory short barrel guns with the front sight on the slide front were made from P4's IIRC.
On a side note I've handled a few P88's thru the years but never fealt they were worth the huge premium they commanded compared to the P7M13 in the same range back in the day, well perhaps the Beretta 92 was as well but at much less, also was not crazy about the looks (striking resemblance to the Zastava CZ99).
Just Random thoughts,
Btw last time I handled one they were fetching $1k used when S&W 3rd gens were $350.
My guess is their high price and chunky look led to poor sales and their current rarity in the market, not sure but think clean P88s are about double today.
|
that's absolutely right, the P88 was the most expensive 9mm after the already sinfully expensive SIG 210 when it came onto the German market. At the end of the 80s this would cost over 2500 Deutschmarks new in Germany, the P88 was around 1600 Deutschmarks, the rest less than 1000. The Zastava, however, followed the appearance of the P88, which had been haunting German gun magazines long before its market launch and whose ambidexterity was much discussed, so the desing was already known everywhere. Plus the CZ99 took over some features of the then well known SIG-Sauer 220/225.
I believe that Walther ruined its own business with the P88 simply because of its high price. Back then, there were plenty of high-quality 9mm double stacks available for half the price, and that's why Walther didn't get into the German government business with the P88 (except for a few pieces for the legendary GSG 9)
I personally really like the P88 because it has excellent balance, an exceptionally good trigger and is comparatively smooth shooting. Ok, the grip is a bit thick compared to the narrow slide, but that doesn't affect the handling if your hands aren't too small. I've been using it for years to win a championship in a shooting competition for reservists of the German Armed Forces in my federal state in a discipline where only army and police service weapons are permitted. Most of the participants shoot SIG 210 or SIG-Sauer.
regards from Germany
Ulrich
__________________
Life is too short to own a bad gun
|
The Following User Likes This Post:
|
|
03-16-2024, 03:31 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,789
Likes: 2,492
Liked 8,331 Times in 2,925 Posts
|
|
Unfortunately only fondled and never fired a P88.
The Sig Saur guns were not on my radar in the 80-90''s era but the P88 definitely looks like if a P99 and P6 had a baby.
On a side note my first trip to CH (Switzerland) was around 1995, stopping in a Swiss gun store I was surprised that Sig handguns that were at about $500 in the US were more like $1000 there without crossing the ocean !
The other thing that shocked me was that citizens could buy full auto weapons without lengthy tax stamps n applications.
My wife had lived there and said "Every man has a machine gun in their closet here"....
I was like...wait....wut?
She was right, the ones we visited all did.
|
03-17-2024, 08:36 AM
|
|
Member
|
|
|
Join Date: Nov 2003
Location: Texas
Posts: 1,477
Likes: 2,002
Liked 3,443 Times in 936 Posts
|
|
I had a P88 for 30 years before I parted with it a few years ago. The ergonomics did not suit me better than those of the P7M13. I had bought the P88 for $650 pre-owned around 1993, when a used HK P7 was about the same price. While a nice P88 still goes for around $1,200 even a surplus HK PSP is closer to $2,000 and the P7M13 starts around $3,500. During the 1990s there was a batch of the Danish surplus 47/8 imported that sold starting at $800 in different qualities, from original to factory refinished. FWIW, I looked up what the house I had bought in 1992 is worth now. The value increased 400%.
I have a P38 that I still occasionally shoot, several Swiss P210s that I love to shoot for accuracy and the great quality, the three P7s have gathered dust in the safe for a while.
__________________
FFL08
|
The Following 2 Users Like Post:
|
|
|
Posting Rules
|
|
|
|
|