M&P 15-22 Picture Thread

[Majorlk]

Tactical Link notes that the battery assist lever will not work with the m&p 15-22. im curious if you have tested it yet. details? successes? failures?

That item is made for AR15s. Here's a lever designed specifically for the 15-22. I have put them on three 15-22s.

SBR Speed Bolt Release

 

[Chrisgt2]

My rifle

And the pistol

 

[mp15.22]

Not a MP15-22, but my cousins brother is going to build me a AR15 similar to this....oh how sexy this is!

 

[Litenyaup]

That item is made for AR15s. Here's a lever designed specifically for the 15-22. I have put them on three 15-22s.

SBR Speed Bolt Release

What does this do exactly?

 

[Jyezahn]

What does this do exactly?

It allows you to use your trigger finger to lock/release the bolt instead of using the paddle.

 

[xxspudxx]

Lets you drop or hold the bolt back with your right hand.

Very useful when doing speed reloads, or clearing a jam.

 

[Majorlk]

Once you've used one for a few mag changes, you'll never want to be without it.

PS - read the description on the web page. Click on MORE.

 

[Litenyaup]

Sounds like a cool add on and very useful! How difficult is the installation?

 

[Majorlk]

Sounds like a cool add on and very useful! How difficult is the installation?

The lever sandwiches the bolt release paddle. Installation takes about a minute.

 

[yugowego]

The lever sandwiches the bolt release paddle. Installation takes about a minute.

do you still have to cut some coils off of the spring?

 

[Jyezahn]

Sounds like a cool add on and very useful! How difficult is the installation?

Piece of cake. Separate the upper from the lower, sandwich the bolt release paddle between the two pieces of the SBR, screw it together with the hex bit, and you're done. Oh yeah, put the upper and lower back together, and function check.

It is highly recommended to cut two turns off of the spring in order to assure 100% operability.

 

[Majorlk]

do you still have to cut some coils off of the spring?

I would assume so, since S&W hasn't changed the spring.

 

[Rapidray]

That item is made for AR15s. Here's a lever designed specifically for the 15-22. I have put them on three 15-22s.

SBR Speed Bolt Release

Thanks a lot. You just gave me a site that will take my money! I could drop a C note in a heart beat there!

 

[yugowego]

Bump to top with a couple udpated pics... one with big brother Colt and the other with little sister MP22

 

[QuiQNeZZ]

I would assume so, since S&W hasn't changed the spring.

Per a review of this on another thread, the new version is lighter and I believe no springs were cut if I remember correctly and it worked fine.

 

[Majorlk]

Per a review of this on another thread, the new version is lighter and I believe no springs were cut if I remember correctly and it worked fine.

I beta tested the lighter version for NDZ and on my rifle, cutting the spring was necessary to ensure 100 percent lock back. It was also necessary for my two grandson's rifles, as well.

 

[monkeyfist08]

hope the photo attached, she feels solid now.

 

[wpsharpshooter]

Just need some optics

 

[Jyezahn]

Been a while, figured I'd post an updated pic. Enjoy!

 

[Seanu30]

The start of a collection