Hello everyone! This is round two of trying to thin out my collection, which continues to grow no matter what I do.
I would prefer a local face-to-face transfer in Spokane, but I will ship FFL to FFL on your dime. I prefer Zelle for payment, but will accept certified checks or USPS money orders.
Please PM me if you're interested in anything.
Summary
S&W 3914, 2 magazines: $500
S&W CS9 (stainless), night sights, 2 magazines: $550
S&W 5906, with upgrades and accessories: $500
SOLD S&W CS9 (stainless), 2 magazines, case & paperwork
SOLD S&W CS9 (black), 1 magazine
Smith & Wesson Model 3914
I have for sale a Smith & Wesson Model 3914, a 9mm compact single-stack 3rd generation Smith & Wesson pistol. This pistol has an aluminum-alloy frame and a steel slide. The manual-of-arms is TDA (DA/SA) with a slide mounted safety/decocker. This has an ambidextrous decocker lever, a low-profile slide release lever, iron anti-snag Novak style high-viz sights, and a bobbed hammer. I will include two OEM 8-round magazines: one with a flat baseplate (reduced profile for carry), and one with a finger rest.
The slide and frame are both in excellent condition, with no holster wear. The internals are in excellent condition, and the rifling is sharp and clean. I put 25 rounds through it at the range, and it shoots true without any malfunctions. Other than the Nitesiters photo-luminescent dots, the pistol is all stock, and in virtually new condition.
$500 for the pistol and 2 magazines
Smith & Wesson Chiefs Special CS9 (stainless), with night sights
I have for sale a Smith & Wesson Chiefs Special CS9, a 9mm subcompact single-stack 3rd generation Smith & Wesson pistol. This pistol has an aluminum-alloy frame and a stainless steel slide. The manual-of-arms is TDA (DA/SA) with slide mounted safety/decocker. This pistol has a bobbed hammer, and an ambidextrous safety/decocker lever. It has anti-snag Novak style Trijicon night sights, yellow rear dots and a green front dot, purchased new in 2022. I will include two OEM 7-round magazines: one with a flat baseplate (reduced profile for carry), and one with a finger rest.
The slide and frame are both in excellent condition, with no holster wear. The internals are in excellent condition, and the rifling is sharp and clean. I added a bit of Talon grip tape to the front of the grip, but that is easily removed without leaving a trace. This is my old carry pistol, and it has never failed me. I put new springs and a new firing pin in it when I purchased it used in 2019, and I have since put ~500 rounds through it at the range with no malfunctions.
$550 for the pistol and two magazines.
Customized & Refreshed Smith & Wesson 5906, and Accessories
I am regretfully selling my beloved Model 5906, a 9mm full-sized double-stack 3rd generation Smith & Wesson pistol. This pistol has an all-steel frame and slide, and weighs in at a hefty 36oz empty, which makes it a nice, soft shooter. The manual-of-arms is TDA (DA/SA) with slide mounted safety/decocker. This pistol was manufactured in 1998. It has a new extractor, firing pin, and springs, as well as a modest trigger job.
I intended to use this 5906 to use as a range gun, as it has an amazing trigger, but unfortunately it just doesn't fit well in my hand, so it hasn't seen much use. I replaced all the internal springs with new stock-weight springs from Numrich, then I subsequently installed a lighter Wolff mainspring. When I purchased it, most of the stainless steel controls had been replaced with carbon steel (black) controls; I had the extractor and extractor pin replaced, so now all of the controls are black. I also had new factory sights installed.
When I had the extractor replaced, the S&W armorer informed me that this pistol had had a trigger job done at some point. Nothing to change the action, just polishing of internal moving parts to smooth out the trigger pull. He stated that it looked to have been done professionally, or at least by someone who knew their business, but I don't have any documentation for it. This was an LEO surplus pistol, if that's any clue. The trigger is extremely smooth in DA, with a short, tactile reset, and crisp, short SA pull; similar to other 3rd gens, but just incredibly smooth. With the Wolff mainspring, the trigger is significantly lighter than stock as well.
The slide and frame are both in very good condition, with just a bit of holster wear. The internals are in excellent condition, and the rifling is sharp and clean. I've put perhaps 100 rounds through it at the range, and the only malfunction I've had was due to breakage of the old firing pin spring, since replaced. I replaced all the internal springs, as well as the firing pin and extractor. I also replaced the slightly worn stock grips with brand new factory grips.
I will include a variety of Wolff springs (recoil, main, firing pin, trigger return) which I purchased for the 5906.
I also have two holsters that fit this pistol; a DeSantis Thumb Break Mini-Slide made specifically for the 5906, and a DeSantis Sky Cop made for a Glock 17, which fits the 5906 perfectly. I will include either of these for $40, or both for $60.
I also have a set of Pachmayr 5906 grips (the newer, smaller ones), which I will include for $75. If you buy the pistol, I'll also throw in two older sets of stock grips (one in good condition, one pretty beat-up) and an extra grip pin. I'd planned on using those to experiment with different textures of grip tape, but never got around to it.
If you live in a state where standard capacity magazines are legal, I will sell up to 5 Mec-Gar 17-round magazines (purchased new in 2020) for $25 each, or all 5 for $100.
I also have 5 stock stainless steel 5-round S&W factory magazines, that I will sell for $40 each, or all 5 for $175. I will include new spare followers for these as well.
Please PM me if you're interested, or if you want to make an offer on the entire package.
$500 for the 5906, no magazines
$40 for either holster ($60 for both)
$75 for the Pachmayr grips
$25 for each Mec-Gar 17-round magazine ($100 for 5)
$40 for each stock 15-round magazine ($175 for 5)
Springs:
Sky Cop Holster:
Thumb Break Slide Holster:
Stock Magazines:
Mec-Gar Magazines:
Pachmayr Grips
Marketing Blurb
As many here are aware, the S&W 3rd Gen pistols (made from ~1988-2010) are great shooters, with excellent triggers; the DA pull is smooth, and the SA has a crispness and reset that rivals or betters aftermarket triggers on other pistols. The 3913 and 3914 were highly popular as carry guns, and the CS9 is among the smallest DA subcompacts available. The aluminum alloy makes for a stiffer, stronger frame than plastic guns, with only a minor weight difference. These pistols weigh approximately the same as equivalently sized M&P Shields. The 5906 is a full-sized, all-steel cannon, whose weight makes it a remarkably soft shooter.
WTS: 3rd Gen Smith & Wessons (3914, CS9, 5906)
Linear Mode
