Help, Kodak 650H Carousel Projector...

P

pjsjr

US Veteran
Joined
Mar 6, 2006
Messages
43
Reaction score
0
Location
Colorado
I picked it up in GW, and it won't drop or advance a slide, just clicks.

I've done some research and believe it to be the solenoid. It is available but the 'techs' want close to $100. to install.

I have downloaded and printed a service manual.

Anyone here have some experience with this?...is it something that I could do myself?...the part is cheap!

I have no trouble taking things apart...it's the putting back together.

Thanks in advance for any info/suggestions. Preston
 
Register to hide this ad
I've never had to change a solenoid, but I've done the belts in a few of them. There are two belts that run the mechanism- a short one and a longer one. As I recall, the short one runs the fan, and the longer one runs the slide-changing mechanism. Whenever the gate won't work, or is out of synch, it's usually the belts. Taking one apart, and putting it back together, isn't difficult, as long as you pay attention to what you take out from where! The difficulty will be in finding the part(s). I'm sure there are still some speciality places that stock them, but (unfortunately) 35mm slides are now an outdated technology. I work part time for a career college that teaches photography (not my program, but how this particular school got their start), and they have gone exclusively digital. There is only one module that involves slides, only to demonstrate exposure concepts with no possibility of manipulation; the slides are not even mounted or projected! You may want to consider snatching up another projector for parts. If the Ektagraphic takes the same solenoid, you might look for schools and other large organizations "cleaning out" their old stock of Ektagraphics. They were much sturdier than the compariable Carousels. Good luck!!!
 
Thanks for your reply smith revolver cop...I know that slides are outdated technology...so am I. I have many slides from years ago that I wanted to view and this projector was cheap.

I'm going to wait and see if I get any other replies, then tear it aprt and see if I can get it going. Preston
 
All slide projectors are cheap today. However there is no way to beat the experience of a slide projected on the screen.

It sounds like it is out of sync. Try putting the tray on it and gently forcing the tray backwards and forwards. Except for a bulb I've never any other part fail in 30 years. I'd bet you can find a replacement cheaper and easier than finding a replacement part.
 
Appreciate the replies...I think I can get the part here in the Denver area, B & H is great, I've ordered from them before.

Beemer-mark said:
Try putting the tray on it and gently forcing the tray backwards and forwards. QUOTE]
Tried this and it did nothing...tray would not budge.

Thanks, Preston
Click to expand...
 
You must log in or register to reply here.

Similar threads

deadin
Help with photos
Replies
13
Views
182
wood714
wood714
moosedog
Plant identification help
Replies
11
Views
375
Echo154
E
jscheck
Need Cell Phone Tech Help
Replies
16
Views
483
pasound
pasound
Narragansett
Humor 5/14/25 ( help needed )
2
Replies
20
Views
431
STCM(SW)
STCM(SW)
O
Help with this OMEGA watch.
Replies
9
Views
576
DWalt
DWalt

Latest posts

Back
Top