Does any one know of a site where I can purchase a white spacer for a 870 Wingmaster? Numrich is out of stock.
Also, is there a website as good as this one for 870s? There were a few videos online but not having any luck finding them . If so please share. Thanks for any help in advance!
DAVE

Why dont you make your own?? You should be able to find some white thin plexiglass or other suitable material at a hobby store and just trace out your buttplate.

Have you asked Remington?

You can ask on the highroad.net, too, in the shotgun forum.

Why do you have to purchase via a website? You can easily purchase parts direct from Remington.

You could try
Remington Society - Index page

White spacer? The old time gunsmiths that I knew favored cutting a piece of white plastic from the side of a Clorox bottle. They just put it between the grip cap, butt plate, recoil pad or whatever and screwed everything up tight. Then they used a sharp razor blade to trim the plastic up just right. It looked great, it was cheap and nobody ever complained.

Charlie

__________________
SWCA # 2294

Well, Remington doesn't stock the spacer anymore and Numrich doesn't have them in stock ether. I looked at the plastic bottle solution but the bottle is about half as thick as the factory spacer. This shotgun is a BDL variant which as most of you older shooters know had the fancy checkering and better walnut with a much glossier finish and the white spacers on both the pistol grip and the buttstock.

Might wanna check Brownells also.

How about a piece of guitar pick guard material?
If you want a piece I think I have some scrap.
It's laminated white/black/white and about an 8th of an inch thick.

__________________
Dum vivo cano

if you have access to industrial supply magazines like mc master, MSC ,
look in there for their sheet pvc and cut it out of that I made a hand gun teardown jig board out of 1/2 in. thick and some 3/8 in thick solid round. i think they have various thicknesses though.

I made one out of the flat bottom of a plastic bucket. You can trace it out and then and cut it with a jigsaw.