Recent content by 243winxb

  1. 243winxb

    Reloading data needed

    https://www.thehighroad.org/index.php?media/albums/speer-no-8-manual.413/
  2. 243winxb

    Making 38 special bullets using a 9mm mould.

    The groove diameter can be as small as .3548 inches, on a Colt. I shoot a 9mm bullet sized to .358" for my 357 mag S&W Model 28-2. 125 grs. Bullet on left.
  3. 243winxb

    Wasp waisted reloads revisited

    Buy a sizing die that applies the correct taper to the case, when sized. RCBS has a carbide tapered insert. The new expanders are M type.
  4. 243winxb

    Overpressure signs in a Model 66-3 with starting load data

    Use current data from Hodgdon. SEE PHOTO. Data was posted above.Here it is again. Hodgdon data with St Marks manufactured data. FOLLOW CURRENT DATA.
  5. 243winxb

    Overpressure signs in a Model 66-3 with starting load data

    Accurate powders, no. 5 & no. 9 were manufactured in many different countries. Different load data. Different burn rates. Hodgdon is using the St. Marks powder manufactured data . Hodgdon has safety data sheets (SDS) containing powder info.
  6. 243winxb

    Overpressure signs in a Model 66-3 with starting load data

    Hope he is not using this brass.
  7. 243winxb

    O.K. What about Max Loads for 357 Magnum using WIN 296/HP 110?

    Accurate no 9 better then 296 0r H110. Use mag primers.
  8. 243winxb

    Overpressure signs in a Model 66-3 with starting load data

    confused- Brass Used? Whats this got to do with a 357 mag?? (confused) "brass is from once fired Starline Sig .357 125 vcrowns." ?? Wrong Brass?
  9. 243winxb

    Overpressure signs in a Model 66-3 with starting load data

    My Maximum load - 357 mag Model 28-2 My worked up 357 mag load with no 9 is 12.1 grs of St Marks powder and my home cast 163 gr lswc , mag primer. Starline 357 Magnum Brass.
  10. 243winxb

    Old cans of powder Dupont 4320 and 4759

    1950s. Cast Boolits
  11. 243winxb

    What is once fired 9mm brass worth

    Scrap price by weight @ local junk yard. The price of yellow brass scrap can range from $1.10 to $2.30
  12. 243winxb

    Primer Question

    Moon clips- misfire Turn in the strain screw, so its tight. They do wear. Get new with spring. 8-Shot Cylinder Cut for Full Moonclips. Are clips S& W brand? Why would a 357 mag use clips? Speed loading? This is more likely to be the reason for misfires. Hammer spring should be around 25...
  13. 243winxb

    Length of .44 240 Grain LSWC?

    231 is in pistol data. Wrong powder for magnum loads.
  14. 243winxb

    Length of .44 240 Grain LSWC?

    44 magnum 240 gr lswc The link has about 5 photos of #7 powder & who manufactured it. Most years were made by - IMI, or Israel Military Industries, is a former Israeli weapons manufacturer that produced firearms, ammunition, and military technology. Later St Marks makes # 7 now. Hodgdon...
  15. 243winxb

    Length of .44 240 Grain LSWC?

    This turned out to be defective primes. The 357 mag load data, over the years, has changed with where the powder is manufactured. Example- S&W M28-2, 357 Magnum, High Pressure, Locked Action, | The High Road
Back
Top