Recent content by RickV

The only problem I have had with the Wolf primers is sometime they don't seat in far enough. I will get a FTF when I recycle the round it fires on the second attempt. So in reality it is my fault for not checking the primer seat depth enough.

I agree with MrPhil. I have not loaded the 1000s of rounds he has but have done at least 1000 and at first was having the same issue once I adjusted the Expander die to add a little more flare the problem went away.

Received my order from PV yesterday. Loaded 100 rounds for my 40 M&P using the Wolf Primers will try them out at the range tomorrow. One thing I noticed with the Wolf's they seemed to seat easier with my Pro 1000 then the Winchesters I have been using. Or maybe I was just being more careful

I ordered 2000 rounds of once fired brass in 40SW for $70 delivered from here: http://oncefiredbrass.net/ They have 9mm for 28.50 per 1000 and can ship up to 2000 for the same shipping charge. I think it was like $10 for the shipping. Was cleaned and polished but not deprimed. Been happy with it.

I ordered 2000 9mm FMJ 1000 115g and 1000 124g for $140 delivered from here: http://www.precisiondelta.com/index1.htm They sell 38spl, 38super, 9mm, 40S&W and 45auto. Shipping is free if you order 2000. They are kinda slow to ship they are trying to keep up with demand. As for lead I have...

I ordered 10000 Wolf primers from PV on Sunday I also ordered 17 #'s of powder. I looked at the website yesterday and the price of powder had gone up a little. Get it while you can!!!!!

Is that the powdery stuff I have read about on other sites? No need to wipe it off?

Called Lee this am. The tech I spoke to told me there is a hex bolt on the front of the shell plate holder. He said to loosen that bolt and push the ram in hard and hold it there while retightening the bolt. Prolem solved loaded 50+ rounds no problems. He did say the 9mm is a pain to resize. He...

I turned it in 1/4 turn after contact as shown in this video from Lee's website http://www.leeprecision.com/html/HelpVideos/videos/Sizi...e%20Adjustment-1.wmv

OOPS clicked wrong button

I sure hope the Wolf's are good I ordered 5000 SP and ordered 5000 LP for a buddy today from Powder Valley.

That's what I ordered and thats what the invoice says. I am not sure but the inside of the die is the darker color like my 40SW is. I ordered a tumbler but it is backordered everyone is stocking up I guess. So yesterday I used the kool-aid cleaning method to clean the 9mm range brass I had...

The 9mm dies were brand new fresh outta the box. Like I posted above now the same thing is happening with the 40S&W. Could temperature change have anything to do with it? My garage is pretty cool right now last week when I was last loading it was a lot warmer.

It is range brass but is mostly Winchester. I just put my 40S&W dies back in and they are doing the same thing now.

I have a Lee Pro 1000. Been loading 40S&W with no problems have done over 800 rounds. I decided to load 9mm also. I ordered the 9mm carbide die set and a 3 hole turret from Lee. Today I set the loader up for the 9mm and started loading after 3 rounds the shell hung up in the de-prime/re-size...