Recent content by S&W 63

Could the magazine latch be forcing the mag to the rear for some reason? My gun kinda looks like the lock tab is bent upward, like the tab didn't get bent to a full 90 degrees during manufacturing. All four of my mags seem to work OK,on the bench....have not fired the gun yet. Any chance the tab...

Per our emails, I'll take 3 of the S&W shield plus 13 rd. mags....Will send check today. Thanks, Dave

You can contact American Exp--We did it online, they took the #'s and mailed a check. Didn't even have to send the checks as I remember...About 5 years ago. The checks I had were 1970's issue Dave

I had same problem with my 63-in three holes, I polished them with some very fine abrasive powder and oil on cloth cleaning jag with a drill..a little goes a long way. Worked great. One comment I picked up while researching, if you ream-do not turn the reamer backwards in the cut..it will jam on...

Kathrine Ross....Stana Katic.....Doris Day

Just before Covid pricing and availability went crazy, A friend and I ordered several thousand rounds of different calibers...It took 14 months for it to dribble in to us. Optics Planet honored the original pricing.

I found some J-frame targets for my 63 on ebay made in Malaysia. Good fit for (?)58 bucks.

Just bought an OWB w/ thumb break from Tagua Gun Leather. Took several days to ship, from Paraguay, Looks good so far. $60 shipped....

I'll see if I can get it right this time-Sorry Heymatt. I will take the barrel and the single stack mag..Will send PM. Dave

I'll take the 6906 barrel and the single stack mag. Thanks, Dave

I guess I need to remember that 1 comes after 2 and so on...Thanks,Dave

K frame serial # Now that I'm going blind from trying to read through all these #'s, I'm not finding anything like my K frame #...47K79xx...Has anyone got any idea what year I've got? Thanks, Dave

Precision Gun Specialties?? There is a thread (today) that mentions the same thing....Titled "6906" and maybe it's not the same--unless you have a Dremel Tool.

Thanks for the idea--I've got Orings but the gap is a little over 1/4" and the material is too stiff to conform to the square corners of the mag...I'll try the heat gun, but I don't think it will work with regular Orings. Thanks,Dave

Just got a CS9..I have several 8rd 3913 mags, they fit, but of course have a gap below the grips. Does anyone have a source for a spacer/sleeve to fill the 1/4" gap? Thanks, Dave